Seats
Good practice
Do not place hard or heavy objects on
the seat backs forming a table, they
could become dangerous projectiles in
the event or sharp braking or impact.
Following the various operations:
-
-
-
-
-
do not remove a head restraint
without stowing it; secure it inside
the vehicle,
ensure that the passengers can
always access the seat belts and
fasten them easily,
passengers must never take
their seat without adjusting and
fastening their seat belt.
a passenger seated in row 3 must
ensure that he does not obstruct
the row 2 seat anchorage points,
a passenger seated in row 3 must
not have the seat in front of them in
row 2 in the folded position; this is
in case the seat could tip towards
the passenger unexpectedly and
injure them.
Operating the Row 3 seats
Removing the seat
Refitting the seat
The label on the seat indicates the
-
-
Lower the head restraint.
Place the seat in the fully folded
position in which it must be installed.
-
position.
Tilt the entire seat forwards.
On each side, take hold of the
uprights of the folded seat, tilting it
forward slightly, and lift it.
Place the hooks of the front feet
between the two bars.
-
-
-
Ensure that no object or foot is
obstructing the rear anchorage
points and that the seat belt is
positioned correctly and available
for use.
-
-
-
Fold back the seat to fix its rear
anchoring feet.
Operate the control to raise the
seat back to its initial position.
Raise the head restraint.
4
English 