Advertisement

Advertisement

EASE OF USE and COMFORT -> Rear fittings (7 seat version) for Your Citroen Berlingo SUV Second Generation (2008-2018)

Practical information  
12 volt socket (120 W max)  
Stowing rings  
Protective net  
It is advisable to limit the use of this Use these rings to secure loads on the  
socket to avoid discharging the battery. floor.  
Open the cover located in the hook  
support.  
Fix the top of the net in the notches,  
having first turned the bar 1/4 of a turn.  
Ensure that the end of the bar engages  
correctly in the metal part of its  
location.  
Fix the straps in the locations provided  
on the floor.  
Tighten the net using the straps.  
The connection of an electrical  
device not approved by CITROËN,  
such as a USB charger, may  
adversely affect the operation of  
vehicle electrical systems, causing  
faults such as poor telephone reception  
or interference with displays in the  
screens.  
4
Practical information  
REAR FITTINGS  
(7 SEAT VERSION)  
Cup holder  
12 volt socket (120 W max)  
Stowing rings  
Any liquid carried in a cup (mug or  
other) on board which could spill,  
presents a risk.  
It is advisable to limit the use of this Use the stowing rings on the floor to  
socket to avoid discharging the battery. secure and retain your loads firmly.  
The seat belt anchorages must not be  
used for this purpose.  
Take care.  
It is recommended that the load is  
immobilised by securing it firmly  
using the stowing rings on the  
floor.  
Practical information  
Seat belts  
Storage flaps  
Ensure that the centre seat belt has  
reeled in correctly to its carrier in the  
roof.  
Raise the corresponding flap.  
Next to the boot sill, the recess is  
intended to receive the roller tube  
containing the load space cover.  
Prevent the row 3 seat belt buckles  
from knocking by raising them as close  
as possible to the anchorages in the  
roof.  
The seat belt buckle attachment rings  
on each side of the boot must not be  
used to retain loads.  
4