Get Driving -> Speed limiter Guide for Citroen Berlingo SUV Third Generation (2018-2025)

Driving

This additional system recognises these road

cruise control, refer to the corresponding

sections.

The speed limiter/cruise control information is

displayed.

Upon detecting a sign suggesting a new speed

setting, the system displays the value and

"MEM" ﬂashes for a few seconds, prompting you

to save it as a new speed setting.

signs and displays them on the instrument panel

if the appropriate display mode is selected:

– No entry: when entering a lane in the wrong

direction, an alert message, including the symbol

of this sign, is displayed on the instrument panel

(request to check the direction of traﬃc).

– Other signs: as you approach it, the symbol

of the corresponding sign is displayed on the

instrument panel.

Steering-mounted controls

If there is a diﬀerence of less than 6 mph

(9 km/h) between the speed setting and

the speed displayed by the Road signs

recognition, the "MEM" symbol is not

displayed.

The actual road signs always take priority

over those displayed by the system.

The signs must comply with the Vienna

Convention on road signs.

1. Speed limiter/cruise control mode selection

2. Memorise the speed setting

Depending on the road conditions, several

speeds may be displayed.

► Press button 2 once to save the suggested

speed value.

A message is displayed, conﬁrming the request.

► Press button 2 again to conﬁrm and save the

new speed setting.

Information displayed on the

instrument panel

Activation/Deactivation

The settings are changed via

the Driving/Vehicle touch screen

menu.

The display then reverts to its previous state.

3. Speed limit indication

4. Speed memorisation prompt

5. Current speed setting

Extended Traﬃc Sign

Recognition

Speed limiter

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids.

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids.

Storing the speed setting

This system prevents the vehicle from

exceeding the speed programmed by the

driver (speed setting).

The speed limiter is switched on manually.

The minimum speed setting is 19 mph (30 km/h).

► Switch on the speed limiter/cruise control.

143

Driving

The speed setting remains in the system

memory when the ignition is switched oﬀ.

Information displayed on

the instrument panel

8. Speed limiter on/pause status indication

9. Programmed speed setting value

10. Speed limiter recommendation with Road

signs recognition (depending on version)

Steering-mounted control

Switching on/Pausing

► Turn thumbwheel 1 to the "LIMIT" position

to select speed limiter mode; the function is

paused.

► If the speed limit setting is suitable (most

recent speed setting programmed in the system),

press button 4-II to switch the speed limiter on.

► Pressing 4-II again temporarily pauses the

function (pause).

1. ON (LIMIT position)/OFF (position 0)

2. Reduce the speed setting

3. Increase the speed setting

4. Pause/resume speed limiter with the speed

setting previously stored

When the speed setting remains below

the vehicle's speed for a prolonged

period of time, an audible warning is emitted.

Head-up display

5. Depending on version:

Display the speed thresholds saved using the

Memorising speeds function

Use the speed suggested by the Road signs

recognition (MEM display)

Adjusting the limit speed

setting

You do not have to switch the speed limiter on in

order to set the speed.

To modify the limit speed setting based on the

vehicle’s current speed:

6. Display and adjustment of the programmed

inter-vehicle distance

► Brieﬂy press button 2 or 3 to change the

value in steps of + or - 1 mph (1.6 km/h).

► Press and hold button 2 or 3 to change the

value in steps of + or - 5 mph (8 km/h).

To change the limit speed setting using

memorised speeds, via the touch screen:

For more information on Memorising speeds

or the Road signs recognition, refer to the

corresponding sections.

7. Speed limiter mode selection indication

144

Driving

► Press button 5 to display the memorised

speed settings.

► Press the touch screen button for the desired

speed setting.

not be able to prevent the vehicle from

exceeding the speed setting.

If necessary, apply the brakes to control your

vehicle’s speed.

Fixed speed limiter

The selection screen closes after a few

moments.

When the vehicle speed returns to the speed

setting level, the speed limiter operates again:

the speed setting display becomes ﬁxed again.

This setting becomes the new limit speed.

To modify the cruise speed setting based on the

speed suggested by the Road signs recognition,

as shown on the instrument panel:

► Press button 5 once; a message is displayed

to conﬁrm the memorisation request.

► Press button 5 again to save the suggested

speed.

Switching oﬀ

► Turn the thumbwheel 1 to the "0" position:

the display of information on the speed limiter

disappears.

If ﬁtted to your vehicle, its speed can be limited

to a ﬁxed setting.

A label located in the passenger compartment

indicates this maximum speed.

Malfunction

The speed is immediately shown on the

instrument panel as the new speed setting.

The ﬁxed speed limiter is not a cruise control

type function. It cannot be activated or

deactivated by the driver during the trip.

Temporarily exceeding the

speed setting

► Fully depress the accelerator pedal.

The speed limiter is temporarily deactivated and

the displayed speed setting ﬂashes.

► Release the accelerator pedal to return to

below the speed setting.

When exceeding the speed is not due to the

driver's action (e.g. in case of a steep slope), an

audible signal is triggered immediately.

The maximum speed is originally set

according to the regulations in force in

the country of sale.

This maximum speed cannot be changed by

the driver.

In the event of a malfunction, dashes are

displayed ﬂashing and then ﬁxed instead of the

speed setting.

Have it checked by a CITROËN dealer or a

qualiﬁed workshop.

If you wish to modify this maximum speed,

contact a CITROËN dealer.

On a steep descent or in the event of

sharp acceleration, the speed limiter will

145

Driving

Operating limits

Never use the system in the following

situations:

Cruise control is switched on manually.

It requires a minimum vehicle speed of 25 mph

(40 km/h).

With a manual gearbox, third gear or higher must

be engaged.

With an automatic gearbox, mode D or second

gear or higher in mode M must be engaged.

With a drive selector, mode D or B must be

engaged.

Cruise control - Speciﬁc

recommendations

– In an urban area with the risk of

pedestrians crossing the road.

– In heavy traﬃc (except versions with the

Stop & Go function).

– On winding or steep roads.

– On slippery or ﬂooded roads.

– In poor weather conditions.

– In the event of restricted visibility for the

driver.

– Driving on a speed circuit.

– Driving on a rolling road.

– When using a ‘space-saver’ type spare

wheel.

– When using snow chains, non-slip covers

or studded tyres.

The cruise control function does not

guarantee compliance with the maximum

authorised speed and the safety distance

between vehicles, the driver remains

responsible for their driving.

In the interest of public safety, only use cruise

control if the traﬃc conditions enable vehicles

to drive at a steady speed and maintain an

adequate safety distance.

Remain vigilant while cruise control is

activated. If you press and hold one of the

speed setting modiﬁcation buttons, your

vehicle may change speed very abruptly.

When descending a steep hill, the cruise

control system cannot prevent the vehicle

from exceeding the set speed. Brake if

necessary to control the vehicle speed.

On steep climbs or when towing, the set

speed may not be reached or maintained.

Cruise control remains active after

changing gear, regardless of the gearbox

type, on engines ﬁtted with the Stop & Start

function.

Switching oﬀ the ignition cancels any

speed setting.

Steering-mounted control

Programmable cruise

control

For more information, refer to the

General recommendations on the use

of driving and manoeuvring aids and the

Cruise control - particular

Exceeding the programmed speed

setting

You can temporarily exceed the speed

setting by pressing the accelerator pedal (the

programmed speed ﬂashes).

recommendations.

To return to the speed setting, release the

accelerator pedal (when the set speed is

reached again, the displayed speed stops

ﬂashing).

This system automatically maintains the

vehicle’s speed at the value programmed

by the driver (speed setting), without the use of

the accelerator pedal.

1. ON (CRUISE position)/OFF (position 0)

2. Activate cruise control at the current speed/

decrease speed setting

146

Driving -> Speed limiter for Your Citroen Berlingo SUV Third Generation (2018-2025)

Related Topics

Driving

Popular Owner Manuals

Latest Owner Manuals