CRUIs e CONTROL
These actions do not cancel the
cruising speed which remains dis-
played on the instrument panel.
Temporary override of the
cruise speed
While cruise control is in operation,
it is always possible to go above the
cruise speed simply by pressing
the accelerator pedal (for example
to overtake another vehicle).
The speed displayed in zone a
flashes.
you only have to release the accel-
erator pedal to return to the cruis-
ing speed.
1
2
ii
reactivation of cruise
control
3
•
By recalling the memorised
speed:
ꢀ
After deactivation, press but-
ton 3. your vehicle automati-
cally returns to the memorised
cruising speed. The memorised
speed and “On” are displayed
in zone a.
5
To cancel the function
•
•
Press on button 5.
select the cruise control func-
suspension or resumption
of cruise control with a
memorised speed
If the memorised cruising speed is
higher than the current speed, the
vehicle will accelerate strongly to
reach the current speed.
tion.
Or stop the engine.
•
either by pressing the brake
pedal or the clutch pedal.
Or by pressing button 3.
Or by the esP or AsR systems
being active.
•
The speed that was chosen is no
longer memorised.
if there is a malfunction, a mes-
sage is displayed accompanied by
a sound signal and lighting of the
sErviCE warning lamp.
•
•
•
By selecting the current
speed:
Press button 1 or
2
once
Note: for vehicles with a manual
gearbox, cruise control is deacti-
vated if the gear lever is in neutral.
the desired speed has been
reached.
Contact a CITROËN dealer.
The new speed and “On” will
appear in zone a.
Cruise control must only be used where the traffic conditions
permit driving at a constant speed.
Do not use it on congested roads or when the weather or the
road conditions are poor.
The driver still has to remain attentive and in complete control
of his vehicle.
You are recommended to keep your feet within range of the
pedals.
“PaUsE” will be displayed in
zone a of the instrument panel.
69
English 