INsTRUMeNT PANeL
WARNING LAMPs
sTOP warning
lamp
When the warning
lamp comes on,
Coolant temperature
It comes on for a few sec-
onds each time you switch
on the ignition.
sErviCE
This warning lamp
remains on perma-
ii
nently, as long as
the fault displayed on the instru-
ment panel screen is present (for
serious faults).
Consult a CITROËN dealer as
soon as possible.
This warning lamp remains on
only for a short time for faults that
are minor.
you must stop the vehicle and
switch off the engine. Contact a
CITROËN dealer.
If this warning lamp comes on,
engine running, it tells you that
the coolant temperature is rising
abnormally.
This warning lamp is linked with
the sTOP warning lamp.
it is essential to stop the vehi-
cle.
Check the coolant level.
If the level is too low, contact
a CITROËN dealer.
Parking brake
Contact a CITROËN dealer.
The permanent lighting of
this warning lamp confirms
that the parking brake is
applied.
If this warning lamp flashes, it indi-
cates a fault with its application
or release. Consult a CITROËN
dealer as soon as possible.
EsP/asr
Operating
If either of the esP or AsR
systems is active, the warning
lamp flashes.
see “Brakes”.
For a malfunction
With the engine running, and
when displayed at the same time
as the sTOP warning lamp, it indi-
cates that the brake fluid level is
too low.
If this warning lamp comes on,
stop immediately and contact
a CITROËN dealer.
With the engine running, the light-
ing of this warning lamp along
with a message on the instrument
panel screen, the lighting of the
sErviCE warning lamp and a
sound signal, indicates a system
fault.
Battery charge
This warning lamp comes
on temporarily when the
engine is switched on. If it
remains on permanently,
contact a CITROËN dealer.
In the event of a battery failure,
the application of the electronic
parking brake when the engine
is switched off is not guaranteed.
you must therefore apply the
parking brake before switching
off the engine.
Contact a CITROËN dealer.
see “Brakes”.
Deactivation
The lighting of this warning lamp
and the light on the esP deactiva-
tion button confirms that the sys-
tem is deactivated.
see “Dynamic stability control”
(esP).
31
English 