sPeeD LIMITeR
1
2
ii
3
a
ꢀ
Temporary override of the
maximum speed
To cancel the function
•
•
Press on button 5.
select the speed limiter func-
5
The accelerator pedal has an end-
of-travel switch. In order to exceed
the memorised maximum speed at
any time, you can press the pedal
all the way down. While the speed
is being exceeded, the speed dis-
played in zone a will flash. You
have only to release the accelera-
tor pedal to return below the maxi-
mum speed, to restore the func-
tion.
remark: the speed will also flash
if the speed limiter is not able to
prevent the vehicle from exceeding
the programmed speed (e.g. on a
steep descent or under excessive
acceleration).
tion.
Or stop the engine.
suspension or resumption
of maximum speed
Press on button 3.
•
The speed that was chosen is no
longer memorised.
if there is a malfunction, a mes-
sage is displayed accompanied by
a sound signal and lighting of the
sErviCE warning lamp.
Contact a CITROËN dealer.
This action causes the information
“PaUsE” to appear in zone a of
the instrument panel.
This action does not cancel the
memorised maximum speed which
remains displayed in zone a of the
instrument panel.
remark: In the event of a steep
descent or under excessive accel-
eration, the speed limiter (which
does not act on the brakes) may
not be able to prevent the vehicle
from exceeding the programmed
speed.
Use of a floor mat
other than that recom-
mended by CiTrOËn
may affect the normal
operation of the accel-
erator pedal and hamper the
operation of the speed limiter.
To reactivate the speed limiter,
release the accelerator to slow to a
speed lower than the programmed
speed.
Floor mats approved by
CITROËN are fitted with a 3rd
fixing located in the pedal
area to avoid any risk of inter-
ference with the pedals.
The speed limiter can in no way
replace respect for speed limits or
vigilance and responsibility on the
part of the driver.
71
English 