Practical information
Head rests and seat belts
Rear side glasses
CREW CAB
Bench seat
Each seat has a head rest adjustable for
height and angle.
If fitted to your vehicle, the side glasses can
be opened.
The three seats are equipped with inertia
reel seat belts. The seat belts are integral
with the backrest of the bench seat.
Squeeze the two controls together then slide
the window. There are 4 position notches.
The crew cab consists of a 3-seat bench,
located in row 2, the one-piece back of
which is fixed to the "load retainer" glazed
partition.
When driving, the glass should be closed or
secured at one of the 4 notches.
Ensure that the seat belt is attached to the
correct buckle.
Access to the rear seats is via the sliding
side door.
For more information on the use of this
equipment, refer to "Seat belts" in section 4.
Good practice
The rear seat belt stalks are not designed for securing the load transported. Use the lashing rings on the floor only.
The bench seat of the crew cab is not suitable for the installation of a child seat.
English 