Steering mounted controls
Activation
Automatic illumination of headlamps
Turn the ring to the AUTO position. The
activation of this function is accompanied by
a message in the screen.
The sidelamps and dipped
beam headlamps switch
on automatically if the light
is poor, or during operation
Deactivation
of the windscreen wipers. They switch off as
soon as the light becomes bright enough or
the windscreen wipers stop.
Turn the ring forwards or rearwards. The
deactivation of this function is accompanied
by a message in the screen.
This function is not compatible with the
daytime running lamps.
The function is deactivated temporarily when
you use the manual lighting control stalk.
HEADLAMP BEAM
If the sunshine sensor does not
function correctly, the lighting comes
on accompanied by the service warning
lamp, an audible signal and a message in
the screen.
In foggy weather or in snow, the
sunshine sensor may detect sufficient
light. As a consequence, the lighting will not
come on automatically. If necessary, you
must switch on the dipped beam headlamps
manually.
Depending on the load in your
vehicle, the beam setting must
be adjusted.
0 - No load.
Contact a CITROËN dealer or a qualified
workshop.
1 - Partial load.
2 - Average load.
3 - Maximum authorised load.
Initial setting is position 0.
Do not cover the sunshine sensor
located on the windscreen, behind
the mirror. It is used for the automatic
illumination of headlamps and for the
automatic rain sensitive wipers.
Travelling abroad
If using your vehicle in a country
that drives on the other side of the road,
the headlamps must be adjusted to avoid
dazzling on-coming drivers.
Contact a CITROËN dealer or a qualified
workshop.
English 