Steering mounted controls
Using the accelerator:
-
exceed the memorised speed until the
speed required is reached,
-
press the Set + or Set - button.
To memorise a speed lower than the
previous one:
Operating fault
The programmed speed is cleared then
replaced by three dashes. Contact a
CITROËN dealer or a qualified workshop to
have the system checked.
-
press the Set - button.
A brief press decreases the speed
by 1 mph (km/h).
A maintained press decreases the speed in
steps of 5 mph (km/h).
Good practice
When changing the programmed reference
speed by means of a maintained press,
pay attention as the speed can increase or
decrease rapidly.
FIXED SPEED LIMITER
Do not use the cruise control on slippery
roads or in heavy traffic.
If your vehicle is fitted with this function,
the speed of your vehicle can be limited to
a fixed speed of approximately 56, 60, 70
or 80 mph (90, 100, 110 or 130 km/h). The
fixed maximum speed cannot be changed.
In the event of a steep slope, the cruise
control cannot prevent the vehicle from
exceeding the programmed speed.
Switching the function off
-
Place the dial in position 0 or switch off
the ignition to switch everything off.
In any event, the cruise control cannot
replace the need to observe the speed limits,
nor can it replace the need for vigilance and
responsibility on the part of the driver.
Cancelling the programmed
reference speed
The fixed speed limiter is not a function
of the cruise control type. It cannot be
activated or deactivated by the driver while
driving.
It is advisable to leave your feet near the
pedals.
When the vehicle becomes stationary, after
switching off the ignition, the system no
longer memorises a speed.
To avoid any jamming under the pedals:
-
ensure that the mat and its fixings on the
floor are positioned correctly,
-
never place one mat on top of another.
English 