Seats
The adjustment is correct when the upper
edge of the head restraint is level with the
top of the head.
To remove it, set it in the high position, press
the tabs and pull upwards and forwards at
the same time.
To re-install, engage the head restraint rods
in the holes, making sure they are aligned
with the seat back.
-
an active adjustment: operate the handle
upwards or downwards until the desired
position is reached.
Adjustable armrest
To place the armrest in its rest position:
-
raise it until it is in the centreline of the
seat back.
Never drive with the head restraints
removed; they must be in place and
correctly adjusted.
To place the armrest in a position for use:
-
-
-
fold it down fully,
raise it slowly to the required position,
if you pass the required position, raise it
fully then repeat the operations above.
4 - Driver's seat lumbar adjustment
Move the lever up or down to obtain the
required position.
Front heated seat controls
Press the corresponding control,
located on the overhead storage
unit.
The temperature is controlled
automatically.
Head restraint height adjustment
To raise or lower the restraint, pull it
forwards, then slide it.
Pressing a second time stops operation.
English 