Get Infotainment system -> Data transfer Guide for Cupra Formentor SUV First Generation (2020-2024)

Data transfer

CUPRA CONNECT's voice recognition or

search technology does not recognise or of-

fer results for all words.

●

Malicious software on data storage devi-

Data transfer

ces, computers, tablets or mobile phones.

CUPRA CONNECT

There are CUPRA CONNECT services for

which registration is mandatory and others

for which it is not mandatory.

Services portfolio

Introduction

The initial service allocation shown here cor-

responds to the third generation of CUPRA

CONNECT services and represents the maxi-

mum services portfolio. The maximum pos-

sible portfolio is only available on some vehi-

cle models. During the useful life of the vehi-

cle, you can change the assignment shown

here.

To use it, CUPRA CONNECT must first be ac-

tivated online by entering into a CUPRA

CONNECT contract with SEAT, S.A. and is

subject to a temporary use limitation de-

pending on the country.

Description of services

Before running CUPRA CONNECT services,

read and take into account the description of

the corresponding services. Descriptions are

updated from time to time and are available

online at myCUPRA.com.

Both the CUPRA CONNECT service portfo-

lios offered by CUPRA and individual services

can be modified, cancelled, deactivated, re-

activated, renamed and extended, even

without prior notification.

●

Always use the most up-to-date version of

After activating the services management in

the infotainment system you can check if the

vehicle has services and what they are.

the corresponding service description.

WARNING

You can create the user account, see the de-

scription of services and more information at

myCUPRA.com.

In some countries and in the event of a con-

tract renewal, the services offered may be

combined differently than indicated here.

They may also vary depending on the year of

production of the vehicle. The aforemen-

tioned services correspond to the third gen-

eration of CUPRA CONNECT.

In areas with insufficient mobile phone and

GPS coverage, neither emergency calls or

phone calls can be made, and data cannot

be transmitted. Change location if possible.

The execution and availability of the CUPRA

CONNECT services and service portfolios

may vary depending on the country, as well

as the vehicle, its equipment and connectivi-

ty.

CAUTION

The vehicle may be damaged by factors

outside CUPRA’s control. These may be

specifically:

CUPRA CONNECT services and functions

that do not require activation

Connectivity statuses

●

Misuse of mobile terminals

The following services also work without ac-

tivating CUPRA CONNECT:

Full connectivity, all services active

^(white)

Data loss during transmission.

Unsuitable or defective third party appli-

Limited connectivity, some services

may not be available.

^(grey)

●

Public emergency call service.

cations.

»

Privacy mode page 177 .

›››

no icon

No connectivity, no services available.

173

Infotainment system

●

Legal.

Online map update

Departure times

Customisation.

Search for points of interest

Petrol stations

plus all CUPRA CONNECT services in the

previous section page 174 .

›››

Activating CUPRA CONNECT.

Private mode (deactivation of services).

Delete user / Restore factory settings.

Online traffic information

Parking lots

CUPRA CONNECT individual options

●

In-Car Applications. These applications

Online infotainment system update

Online route calculation

Information on risks

can be purchased and installed directly in

the infotainment system through the In-Car

store.

CUPRA CONNECT services

The CUPRA CONNECT services are:

●

Private emergency call

Public emergency call

Roadside assistance call

Customer support

●

Full Link.

Dictation

Data package. Pay per use data rates for

Natural voice control for infotainment, me-

the use of online functions, for example, 2

GB per month.

dia and radio apps

●

Natural voice control for destinations and

addresses

Service appointment planning

Online system update

Customisation

Note

●

Online radio

●

The public emergency call service is

Online media

available regardless of whether the info-

tainment system is logged in.

Online route import

Online destination import

Remote auxiliary ventilation

Parking position

Privacy mode

Activating CUPRA CONNECT

Private mode (deactivation of services)

Delete user / Reset factory settings

Remote independent heating

Remote opening

●

Customisation and purchase of In-Car

applications requires logging into the info-

tainment system, but it is not necessary to

activate the vehicle in a CUPRA CONNECT

account.

Legal

Horn and turn signals

Vehicle status incl. doors and lights

Driving data

Activating CUPRA CONNECT and

S-PIN

CUPRA CONNECT services for hybrid vehi-

cles

Vehicle status report

Available only in electric and hybrid vehicles.

Activating CUPRA CONNECT

Anti-theft alarm warning

Zone warning

●

Remote air conditioning

Electrical power manager

The following steps are necessary to activate

CUPRA CONNECT (including registration):

Speed warning

174

Data transfer

●

Create a user account at myCUPRA.com or

S-PIN

Switch on the ignition and the infotainment

system.

directly through the infotainment system in

the User Management menu.

The S-PIN is a sequence of several digits,

which can be selected when the CUPRA

CONNECT registration is completed.

●

In the infotainment system, register in CU-

PRA CONNECT.

●

Place the CUPRA CONNECT order and ac-

tivate it.

●

Or: open the menu  Users > Settings >

When creating the S-PIN, avoid easy-to-

guess number sequences and known dates

of birth. You can change the S-PIN in the

CUPRA CONNECT user account in “Account

settings”.

●

Add the vehicle to your user account.

Prove ownership.

Become primary user and follow the in-

structions.

●

Press the unlock button on the first vehicle

key.

Prove your identity. It is only necessary if

you are to run CUPRA CONNECT services

relevant to security.

●

Press the unlock button on the second ve-

The S-PIN is necessary, for example, to pro-

tect your user profile or to run a CUPRA

CONNECT service relevant to the security of

your vehicle.

hicle key.

●

You can activate it at myCUPRA or directly

through the infotainment system. To activate

it through the infotainment system, proceed

as follows:  Users > Settings > Become pri-

mary user.

Once the infotainment system has pro-

cessed the orders by radiofrequency, the ac-

creditation of the ownership will have been

completed. You can control the current sta-

tus on the CUPRA CONNECT website.

You must manage this S-PIN with absolute

confidentiality. If you reveal the S-PIN to

third parties, for security reasons you must

change it immediately.

Follow the rest of the indications and the in-

formation shown in the infotainment system.

During activation, you may be asked to cre-

ate an S-PIN.

How is ownership accredited?

Infotainment

2-Key method.

Ownership and identity accredi-

tation

CUPRA CONNECT web- No, it is not possible

site

Update option

Infotainment

yes

Become primary user

CUPRA CONNECT ap-

plication

No, it is not possible

CUPRA CONNECT website

CUPRA CONNECT application

To become a main user and thus prove own-

ership of the vehicle, you need both of the

vehicle’s physical keys. Ownership accredita-

tion takes place in the vehicle during regis-

tration or, if you already have a CUPRA CON-

NECT user account, you must log in through

the infotainment system and then go to

Manage users

Identity accreditation (SEAT Ident)

More information at myCUPRA.com/faqs

Identity accreditation must be completed

before you can use CUPRA CONNECT serv-

ices that are relevant to security, such as the

»

175

Infotainment system

“Remote Opening” service. Identity accredi-

tation is done at the specialised CUPRA deal-

er or any SEAT dealership.

Follow-up services: ask all occupants

you can access in its corresponding current

version on the CUPRA website.

The follow-up services need geographical

and vehicle data to determine whether the

vehicle is being used within defined speed

ranges, where it has been parked or if it is be-

ing used in an established geographical area.

This information is displayed on the CUPRA

CONNECT website and in the CUPRA CON-

NECT app.

Permanent transfer of the vehicle

You can find more information about SEAT

Ident on the CUPRA CONNECT website at

myCUPRA.com.

If another person has left you the vehicle for

permanent use (for example, if you buy a

used vehicle), CUPRA CONNECT may al-

ready be activated and the previous user may

still be able to access the data registered

through CUPRA CONNECT and control cer-

tain functions of your vehicle.

Legal provisions

Therefore, before moving off, ask all the ve-

hicle occupants if they agree with the activa-

ted services. If they do not, deactivate the

service in question (if possible) or do not al-

low the occupants to use the vehicle.

When using CUPRA CONNECT services, in-

formation is transferred and processed on-

line through the vehicle. Such data can also

provide (at least indirectly) information

about the driver in question, for example,

driving behaviour and location. As a con-

tracting party in the CUPRA CONNECT con-

tract with SEAT, S.A., you must ensure that

when your vehicle is used by other drivers

(for example, family or friends), data protec-

tion and personal rights are respected.

Therefore, you must inform drivers in ad-

vance that the vehicle transfers and receives

data online, and that you can access such

data.

In the infotainment system you can check if

your vehicle is assigned to a person as the

main user. In this case, you can register your-

self as the main user of the vehicle and thus

automatically delete the previous main user.

Alternatively, through the infotainment sys-

tem you can directly and permanently delete

the previous user as the main user, as well as

put the vehicle in offline mode and thus limit

both the communication of your vehicle with

the SEAT, S.A. data server and the processing

of personal and vehicle data.

GPS tracking: marking

If the vehicle has a factory-assembled con-

trol unit that transmits the its current geo-

graphical position and speed, the vehicle

usually has this GPS marking (e.g., on the

roof console). The absence of the marking

on the vehicle does not guarantee that the

control unit does not transmit the vehicle’s

current geographical position and speed.

Not taking into account this obligation to in-

form, can infringe certain rights of the occu-

pants.

Deactivating CUPRA CONNECT

services

Personal information

CUPRA protects your personal data and only

uses them, as long as the law allows it or you

have given your consent on the occasion of

a use. You will find detailed information on

data processing in relation to CUPRA CON-

NECT services in the Privacy Policy, which

The following functions are available in the

infotainment system to deactivate and acti-

vate CUPRA CONNECT services:

Users can manage data sending and trans-

fers through the privacy mode at any time.

For more information visit:

myCUPRA.com/faqs

●

Central deactivation or activation

176

Data transfer

●

Individual deactivation or activation

Interference, disturbance or interruption in

Find out more information at:

myCUPRA.com.

the reception of the mobile phone and GPS

signal due to aspects such as high-speed

driving, solar storms, meteorological influen-

ces, topography, blocking equipment and

the intensive use of mobile phones in the ra-

dio cells in question.

You can rerun the corresponding services af-

ter cancelling their deactivation in the info-

tainment system.

Privacy and Services Settings

CUPRA CONNECT services can be activated

and deactivated individually. To do this, just

check the box corresponding to the service

you want to activate or deactivate. Use the

privacy mode option if you want to deacti-

vate all of the services at the same time.

Note

The services required by law and their data

transmission, such as the public emergency

call system, cannot be disconnected or de-

activated.

●

When in areas with zero or insufficient mo-

bile telephony or GPS signal. Also, for exam-

ple, in tunnels, confined areas between very

tall buildings, garages, underpasses, moun-

tains and valleys.

Privacy mode

●

External information from third party sup-

Allows you to deactivate or activate the serv-

ices depending on the selected privacy level.

Faults

plies available with limitations, incomplete or

incorrect, e.g. representations of maps.

Even if the prerequisites for the use of CU-

PRA CONNECT services are met, there may

be factors beyond the control of CUPRA that

interfere with the execution of such services

or prevent them. These may be specifically:

Share location. Main users and co-

users can view position data on the CU-

PRA CONNECT portal or app.

●

Countries and regions where CUPRA CON-



NECT is not offered.

Tracking

Use location. Position, vehicle, and

user data are used for services.



Location

Service management

●

Maintenance, repair, deactivation, soft-

ware update and technical expansion of tele-

communication equipment, satellites, serv-

ers and data banks.

Open the settings in Users and go to Privacy

settings and services. You can do the fol-

lowing in the infotainment system:

No location. Only the vehicle data and

user data are used for services.



Personal

Maximum privacy. Your services are

disabled. Only services required for le-

gal reasons use data.

●

Change of the mobile telephony standard



Incognito

●

Check which CUPRA CONNECT services

are currently available in the vehicle.

for the transmission of mobile data by the

telecommunications service provider, for

example, from UMTS to EDGE or GPRS.

●

The number of CUPRA CONNECT services

that are activated or deactivated.

Setting options are not available in all mar-

kets or in all vehicle models.

»

●

Disconnection of an existing mobile phone

●

Activate or deactivate CUPRA CONNECT

services.

standard by the telecommunications service

provider.

177

Infotainment system

●

The availability of the technologies that Full

Link includes depends on the country and

the mobile phone device used.

Confirm authorisation inquiries on the mo-

Note

bile phone device to grant the necessary au-

thorisations to the infotainment system.

If you deactivate all CUPRA CONNECT serv-

ices, the OCU may continue to transmit da-

ta.

●

Disconnect the USB connection and con-

You can find more information on the CU-

PRA website.

nect with the infotainment system again via

Wi-Fi or Bluetooth®. Wireless Full Link is now

configured.

Access the Full Link main menu

Full Link

Browsing the Full Link main menu depends

on the infotainment system used.

The pairing has concluded. The connected

mobile phone device can also use Wireless

Full Link from now on without the USB con-

nection.

Introduction

●

Click on  Full Link.

With Full Link it is possible to view and use

the contents and functions that are shown

on the mobile phone device on the infotain-

ment screen.

If pop-up menus are rejected during the

connection process, Wireless Full Link will

not be available. In this case, CUPRA recom-

mends removing the devices in both the tel-

ephone settings and the infotainment sys-

tem, and restarting the connection process.

Configure Wireless Full Link

In order to use Wireless Full Link, you must

first pair the mobile phone device with the

infotainment system. To do this, proceed as

follows:

To do this, the mobile phone device must be

connected with the infotainment system

through a USB interface.

Connect a mobile phone device for the first

time.

WARNING

Some technologies can also be used by

Wireless Full Link through the Bluetooth® in-

terface and a Wi-Fi connection.

The use of applications while driving can

distract your attention from the traffic. Any

distraction affecting the driver in any way

can lead to an accident and cause injuries.

●

Unlock the mobile phone device.

●

Enable Wi-Fi reception and Bluetooth® on

the mobile phone device.

The following technologies may be availa-

ble:

●

Connect the mobile phone device to the

●

Always drive as carefully and responsibly

infotainment system using a USB cable or via

Bluetooth®.

as possible.

●

Apple CarPlay™

Apple CarPlay™ Wireless

Android Auto™

●

Access the Full Link main menu, unless it

appears automatically.

WARNING

Any applications that are not suitable or

execute incorrectly may cause damage to

the vehicle, accidents and serious injuries.

Android Auto™ Wireless

MirrorLink®

●

Select the mobile phone device and the

technology you want.

178

Data transfer

In the case of third-party applications, there

may be compatibility problems.

Apple CarPlay™

●

Protect the mobile phone device and its

applications from inappropriate use.

In order to use Apple CarPlay, the following

requirements must be met:

●

Never carry out modifications to the ap-

Applications, their use and the necessary

mobile phone connection may be pay per

use.

plications.

●

The iPhone™ must be compatible with

Apple CarPlay™.

●

Follow instructions in the instruction

manual for the mobile phone device.

The offer of applications can be varied and

designed for a vehicle or a specific country.

The content and volume of applications, as

well as the companies that offer them, may

vary. Some applications also depend on the

availability of third-party services.

●

Voice control (Siri ™) must be active on the

iPhone™.

CAUTION

●

Apple CarPlay™ must be active without

limitations in the iPhone™ settings.

CUPRA cannot be held liable for any dam-

age caused to the vehicle as a result of the

use of applications that are of poor quality

or are defective, the inadequate program-

ming of the applications, the insufficient

coverage of the network, the loss of data

during transmission or the improper use of

mobile phone devices.

●

The iPhone ™ must be connected to the

infotainment system via a USB connection.

Only USB connections with data transmis-

sion are suitable for the use of Apple Car-

Play™.

It cannot be guaranteed that all the applica-

tions offered will work on all mobile phone

devices or with all their operating systems.

The applications offered by CUPRA can be

modified, cancelled, deactivated, reactiva-

ted and extended without prior notification.

●

The USB cable used must be an original

Apple™ cable.

Note

Apple CarPlay™ Wireless: Bluetooth® and

Wi-Fi must also be activate on the iPhone™.

To avoid distracting the driver while driving,

only certified applications can be used.

●

Wireless Full Link may not be compatible

with all technologies.

●

Wireless Full Link (Android Auto ™ and

Establish connection

Apple CarPlay ™) is disabled in countries

whose radio frequency regulations do not

allow it to operate.

Full Link symbols and settings

When you first connect an iPhone™, follow

the instructions on the infotainment system

screen and on the iPhone ™.











To show more information

To open the Full Link settings menu

To select Apple CarPlay technology.

To select Android Auto™ technology.

To select Mirror Link® technology.

The requirements must be met to use Apple

CarPlay™.

Applications (apps)

With Full Link, the display of the contents of

CUPRA applications and other providers in-

stalled on mobile phone devices can be

transferred to the infotainment screen.

Launch Apple CarPlay™:

●

Press  Full Link to access the Full Link

main menu.

»

179

Infotainment system

●

Press Apple CarPlay™ to establish a con-

Depending on the infotainment system

Android Auto™

nection with the iPhone™.

you use, on the instrument panel screen you

can view data from the Telephone and Media

mode.

Requirements for Android Auto™

Disconnecting

In order to use Android Auto™, the following

requirements must be met:

●

With the multifunction steering wheel you

●

In Apple CarPlay™ mode, press the CUPRA

icon to access the Full Link main menu.

can accept or reject incoming calls, as well as

end an ongoing telephone conversation.

●

The mobile phone device, called smart-

phone from here on, has to be compatible

with Android Auto™.

●

Press  to interrupt the active connection.

voice control

The representation of function buttons on

the screen may vary.

●

The smartphone must have an Android

Auto™ application installed.

●

Press  briefly to start voice control using

the infotainment system.

●

The smartphone has to be connected

through the USB connection with data trans-

mission with the infotainment system.

Special characteristics

●

Press this button for a long time to start

During an active Apple CarPlay™ connec-

tion, the following characteristics are appli-

cable:

voice control (Siri™) of the connected

iPhone™.

●

The USB cable used must be an original

cable provided by the smartphone manufac-

turer.

Note

●

Bluetooth® connections between the

iPhone™ and the infotainment system are

not possible.

●

The availability of technologies depends

on the country and may vary.

Android Auto™ Wireless: Bluetooth® and

Wi-Fi also have to be activated on the de-

vice.

●

If there is an active Bluetooth® connec-

tion, it is automatically interrupted.

●

You will find information about technical

requirements, compatible iPhones, certi-

fied applications and their availability on

the CUPRA and Apple CarPlay ™ websites,

at specialised CUPRA dealers.

●

The phone functions are only available

Establish connection

through Apple CarPlay™. The functions de-

scribed for the Infotainment system are not

available.

When you first connect a smartphone, follow

the instructions on the infotainment system

screen and on the smartphone.

●

The connected iPhone™ cannot be used

as a multimedia device in the Media main

menu.

The requirements must be met to use An-

droid Auto™.

●

It is not possible to use the built-in naviga-

Launch Android Auto™:

tion system and the Apple CarPlay™ naviga-

tion system at the same time. The last route

started interrupts the one that was previously

active.

●

Press  Full Link to access the Full link

main menu

180

Data transfer

●

Press Android Auto™ to establish a con-

On the instrument panel screen you can

The mobile phone device must be con-

nection with the smartphone.

view data from the Telephone and Media

mode.

nected to the infotainment system via a USB

connection that is suitable for data transmis-

sion.

Disconnecting

●

With the multifunction steering wheel you

●

can accept or reject incoming calls, as well as

end an ongoing telephone conversation.

The USB cable used must be an original

●

In Android Auto™ mode, press the Ex-

cable provided by the mobile phone device

manufacturer.

it/SEAT icon to access the Full Link main

menu.

voice control

●

Depending on the mobile phone device

●

Press  to interrupt the active connection.

used, a Car-Mode application that is suitable

for using MirrorLink® must be installed.

●

Press  briefly to start voice control using

the infotainment system.

Special characteristics

●

Press and hold this button to start voice

During an active Android Auto™ connection,

the following characteristics are applicable:

Establish connection

control (Google Assistant) on the connected

smartphone.

When you first connect a mobile phone de-

vice, follow the instructions on the infotain-

ment system screen and on the mobile

phone device.

●

An active Android Auto™ device can be

connected at the same time via Bluetooth®

(HFP profile) with the infotainment system.

Note

●

The availability of technologies depends

●

It is possible to use the phone’s functions

on the country and may vary.

The requirements must be met to use Mir-

rorLink™.

through Android Auto™. If the Android Au-

to™ device is connected at the same time via

Bluetooth® with the infotainment system,

the telephone function of the infotainment

can also be used.

●

You will find information about technical

requirements, compatible mobile phone

devices, certified applications and their

availability on the CUPRA and Android Au-

to™ websites, at specialised CUPRA deal-

ers.

Launch MirrorLink®:

●

Press  Full Link to access the Full Link

main menu.

●

An active Android Auto™ device cannot be

●

Press to establish the connection with the

used as a multimedia device in the Media

main menu.

mobile phone device.

●

It is not possible to use the built-in naviga-

MirrorLink®

Disconnecting

tion system and the Android Auto™ naviga-

tion system at the same time. The last route

started interrupts the one that was previously

active.

●

In the MirrorLink® mode, press the APP

icon to access the Full Link main menu.

Requirements for MirrorLink®

In order to use MirrorLink™, the following re-

quirements must be met:

●

OR: press  to access the MirrorLink®

main menu.

●

The mobile device must be compatible

with MirrorLink™.

●

»

Press  to interrupt the active connection.

181

Infotainment system

Special characteristics

all function button to close all the open

applications.

Note

During an active MirrorLink® connection, the

following characteristics are applicable:

●

Data transmission may incur charges.

Press to display the mobile phone de-

vice screen on the infotainment system

screen.

Due to the high volume of data exchanged,

CUPRA recommends the use of a flat rate

tariff for data transmission. Mobile phone

operators can provide the relevant infor-

mation.



●

An active MirrorLink® device can be con-

nected to the infotainment system at the

same time via Bluetooth®.



To open the MirrorLink® settings.

Press to return to the MirrorLink® main

menu.

●

If the MirrorLink® device is connected to



●

The exchange of data packages may gen-

the infotainment system via Bluetooth®, the

telephone function of the infotainment sys-

tem can be used.

erate additional costs, depending on your

mobile phone rate, particularly if you are

abroad (for example, roaming rates).

Note

●

You will find information about technical

requirements, compatible mobile phone

devices, certified applications and their

availability on the CUPRA and MirrorLink®

websites, at specialised CUPRA dealers.

You cannot use an active MirrorLink® de-

vice as a multimedia device in the Media

main menu.

Configuration for sharing a con-

nection over WLAN

●

On the instrument panel screen you can

view data from the Telephone mode.

●

The instrument panel screen does not dis-

Establishing the connection with the wire-

less network (WLAN)

play any indication to turn or the Media

mode.

WLAN access point

●

Press the  Settings button.

●

With the multifunction steering wheel you

Activate the wireless network. To do this,

Introduction

can accept or reject incoming calls, as well as

end an ongoing telephone conversation.

press the function button Wi-Fi > Infotain-

ment system as hotspot.

3 Not available on vehicles without CUPRA

CONNECT and without navigation

●

Activate the wireless network (WLAN) on

Function buttons

the device that is to be connected. If neces-

sary, refer to the manufacturer’s instruction

manual.

The infotainment system can be used to

share a WLAN connection with up to 8 devi-

Function buttons and their function:

APP Return the Full Link main menu. Here

you can end the MirrorLink® connec-

tion, connect another mobile phone

device or select another technology.

ces page 182, Configuration for sharing

›››

a connection over WLAN.

●

Activate the mobile device assignment in

the infotainment system. To do this, press

the function button Enable as hotspot and

check the checkbox.

The infotainment system can also use the

WLAN hotspot of an external device to pro-

vide Internet to the devices connected to



Press to close the open apps. Then

press the apps to be closed or the Close

●

Enter and confirm the network key dis-

played on the device.

the hotspot (WLAN client) page 183 .

›››

182

Data transfer

The following adjustments can also be made

in the Infotainment system as hotspot

menu:

Establishing the connection with the wire-

less network (WLAN)

Wi-Fi Protected Setup (WPS)

3 This depends on the equipment and the

country in question.

●

Activate and check the wireless hotspot on

the external device. If necessary, refer to the

manufacturer’s instruction manual.

●

Security level: WPA2 encryption automat-

ically generates a network key.

Wi-Fi Protected Setup can be used to create

a ciphered local wireless network quickly and

simply.

●

Press the  Settings button; OR access

the Media and press the Settings menu.

●

Network key: Network key automatically

generated. Press the function button to

manually change the network key. The net-

work key must have a minimum of 8 charac-

ters and a maximum of 63.

●

Establish the connection with the wireless

network (WLAN).

●

Press the Wi-Fi > Connect to Wi-Fi menu

and put a check in the checkbox.

●

Press the WPS button on the WLAN router

●

Press the Search for Wi-Fi button and se-

lect the device you want from the list.

until the warning light on the router starts

flashing. If the WLAN router does not sup-

port WPS the network must be configured

manually.

●

SSID: WLAN Network name (maximum of

32 characters).

●

If necessary, enter the network key of the

device in the infotainment system and con-

firm with OK.

The wireless (WLAN) connection is estab-

lished. To complete the connection, it may

be necessary to enter other data into the de-

vice.

●

OR: Press and hold the WLAN button on

Manual settings:

the WLAN router until the WLAN light on the

router starts flashing.

●

To manually enter the network settings of

Repeat this process to connect other devi-

ces.

an external (WLAN) device.

●

Press the WPS button on the WLAN de-

vice. The wireless (WLAN) connection is es-

tablished.

The wireless (WLAN) connection is estab-

lished. To complete the connection, it may

be necessary to enter other data into the de-

vice.

There is also the option of scanning the QR

code by connecting the device directly to

the infotainment system’s Wi-Fi network

without having to enter the password: select

Settings > Wi-Fi > Quick connection to in-

fotainment system.

Repeat this process to connect other devi-

ces.

Note

Due to the large number of devices on the

market, it is not possible to guarantee fault-

free operation of all functions.

Configure Internet access

The infotainment system can use the WLAN

hotspot of an external device to establish an

Internet connection.

183

Infotainment system -> Data transfer for Your Cupra Formentor SUV First Generation (2020-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals