Infotainment system
Special characteristics
all function button to close all the open
applications.
Note
During an active MirrorLink® connection, the
following characteristics are applicable:
●
Data transmission may incur charges.
Press to display the mobile phone de-
vice screen on the infotainment system
screen.
Due to the high volume of data exchanged,
CUPRA recommends the use of a flat rate
tariff for data transmission. Mobile phone
operators can provide the relevant infor-
mation.
●
An active MirrorLink® device can be con-
nected to the infotainment system at the
same time via Bluetooth®.
To open the MirrorLink® settings.
Press to return to the MirrorLink® main
menu.
●
If the MirrorLink® device is connected to
●
The exchange of data packages may gen-
the infotainment system via Bluetooth®, the
telephone function of the infotainment sys-
tem can be used.
erate additional costs, depending on your
mobile phone rate, particularly if you are
abroad (for example, roaming rates).
Note
●
You will find information about technical
requirements, compatible mobile phone
devices, certified applications and their
availability on the CUPRA and MirrorLink®
websites, at specialised CUPRA dealers.
You cannot use an active MirrorLink® de-
vice as a multimedia device in the Media
main menu.
Configuration for sharing a con-
nection over WLAN
●
On the instrument panel screen you can
view data from the Telephone mode.
●
The instrument panel screen does not dis-
Establishing the connection with the wire-
less network (WLAN)
play any indication to turn or the Media
mode.
WLAN access point
●
●
Press the Settings button.
●
With the multifunction steering wheel you
Activate the wireless network. To do this,
Introduction
can accept or reject incoming calls, as well as
end an ongoing telephone conversation.
press the function button Wi-Fi > Infotain-
ment system as hotspot.
3 Not available on vehicles without CUPRA
CONNECT and without navigation
●
Activate the wireless network (WLAN) on
Function buttons
the device that is to be connected. If neces-
sary, refer to the manufacturer’s instruction
manual.
The infotainment system can be used to
share a WLAN connection with up to 8 devi-
Function buttons and their function:
APP Return the Full Link main menu. Here
you can end the MirrorLink® connec-
tion, connect another mobile phone
device or select another technology.
ces page 182, Configuration for sharing
›››
a connection over WLAN.
●
Activate the mobile device assignment in
the infotainment system. To do this, press
the function button Enable as hotspot and
check the checkbox.
The infotainment system can also use the
WLAN hotspot of an external device to pro-
vide Internet to the devices connected to
Press to close the open apps. Then
press the apps to be closed or the Close
●
Enter and confirm the network key dis-
played on the device.
the hotspot (WLAN client) page 183 .
›››
182
English 
