2020-2024 Cupra Formentor SUV Infotainment system -> Navigation User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Infotainment system -> Navigation for Your Cupra Formentor SUV First Generation (2020-2024)

Infotainment operation  
Navigation  
Introduction  
Fig. 136 Schematic representation: Navigation  
view  
A global satellite system determines the cur-  
rent position of the vehicle and the sensors  
mounted on the vehicle analyse the routes  
taken. All measured values and possible traf-  
fic events are compared with the available  
maps to allow optimal navigation to the des-  
tination.  
ble on the screen when travelling above a  
certain speed. It is not a malfunction, but is  
due to compliance with legislation.  
If the exact destination cannot be reached  
because, for example, it is in a non-digitised  
area, indications relating to the address and  
the distance to the destination are displayed  
on the screen.  
Navigation announcements  
Navigation announcements are acoustic in-  
dications for driving referred to the current  
route.  
During dynamic route guidance, you will re-  
ceive information about reported traffic  
congestion on the route. An additional navi-  
gation announcement is provided if the  
route is recalculated due to traffic conges-  
tion.  
Navigation announcements and graphic rep-  
resentations will guide you to your destina-  
tion.  
The type and frequency of navigation an-  
nouncements depend on the driving situa-  
tion, for example, starting the guide to the  
destination, driving on the motorway or on a  
roundabout and the settings.  
Navigation management is carried out on  
the screen.  
While a navigation announcement is playing,  
its volume can be adjusted. The following  
»
Depending on the country, some functions  
of the infotainment system will not be availa-  
193  
Infotainment system  
navigation announcements provided will be  
played with the newly adjusted volume.  
Zoom in the view (tip: use your index fin-  
map backward, move your fingers down-  
wards.  
ger).  
To increase the view in a certain position,  
Rotate view (tip: use your index and middle  
Limitations during navigation  
double-click on the map.  
fingers).  
If the infotainment system cannot receive  
data from GPS satellites, for example, in a  
tunnel or in an underground garage, naviga-  
tion continues using the vehicle's sensors.  
Zoom out the view (tip: use your index and  
Press on the map with both fingers at the  
same time and keep them pressed.  
middle fingers).  
Press on the map with both fingers at the  
To rotate the map view, turn your fingers  
same time.  
clockwise anticlockwise.  
In areas that are not digitised or are only par-  
tially digitised on the infotainment memory,  
the infotainment system will still attempt to  
provide route guidance.  
Change view (tip: use your index finger).  
Saved data  
Press twice on the map and keep your fin-  
ger pressed on the screen.  
The infotainment system saves certain data,  
for example, frequent routes and position  
data, to make the entry of the destination  
more agile and optimise the route guidance.  
In the case of missing or incomplete naviga-  
tion data, it may not be possible to deter-  
mine the exact position of the vehicle. This  
may mean that navigation is not as precise as  
usual.  
To zoom out the view of the map, move  
your finger upwards. To zoom in the view of  
the map, move your finger downwards.  
Delete saved data  
Change view (tip: use your index and middle  
Press Settings > Basic function settings >  
fingers).  
Delete and then OK  
Roads and streets are subject to constant  
change (e.g. new roads, road works, roads  
closed to traffic, changes to street names  
and building numbers). If the navigation data  
is obsolete, this may lead to errors or inac-  
curacies during the route guidance.  
Press on the map with both fingers at the  
same time and keep them pressed.  
WARNING  
To zoom out the view of the map, move  
Select the settings, enter the destination  
and the modifications for navigation only  
with the vehicle at a standstill.  
one finger towards the other. To zoom in the  
view of the map, move one finger away from  
the other.  
Managing the navigation map  
Note  
Tilt the view (tip: use your index and middle  
To allow an optimal view, you can also man-  
age the navigation map with additional finger  
movements.  
fingers).  
If a detour is passed during route guid-  
ance, navigation may recalculate the route.  
Press on the map with both fingers at the  
same time and horizontal to each other,  
keep them pressed.  
The quality of the navigation recommen-  
dations given by the Infotainment system  
depends on the navigation data available  
and any reported traffic congestions.  
Move the map (tip: use your index finger).  
To tilt the view of the map forward, move  
your fingers upwards. To tilt the view of the  
Move the map with your finger.  
194  
Infotainment operation  
Current position  
Other symbols  
Navigation announcements are not emit-  
ted if the sound is muted in the infotain-  
ment system.  
Search for destinations.  
Destinations along the route.  
Final destination  
Entering the detailed destination for an  
address.  
Search for destinations.  
Frequent destinations.  
Last destinations.  
Favourite destinations  
Back  
Home address  
Navigation functions and symbols  
Work address  
Navigation  
Favourite destinations  
Navigation functions depend on the equip-  
ment and country.  
Additional window with more options.  
Additional window with route options.  
Centre the map on the current position.  
Symbols in the route details  
Functions  
Current position.  
Entering destination and route calculation  
(offline and online).  
Change view: 2D oriented to the north,  
or 2D oriented to the direction of travel,  
or 3D to the direction of travel.  
Destination of the current guidance.  
Displaying two navigation maps at the  
same time (display and instrument cluster).  
POI symbols (points of interest)  
Information about the current route  
guidance.  
|
POIs (points of interest) are shown on the  
map, provided the navigation has said data.  
Update of online maps.  
Predictive navigation.  
Map scale.  
Click on the desired POI (point of interest) to  
start a route guidance page 196 .  
3D urban maps.  
›››  
Symbols in the additional window  
Online traffic information  
Dynamic POIs (points of interest)  
To open the additional window, press .  
Petrol station.  
Parking lot.  
Repeat the last navigation announce-  
ment.  
Symbols on the map  
Tourist information offices.  
Train station.  
Volume of navigation announcements.  
The buttons and indications depend on the  
settings and the current driving situation.  
Map lighting in Automatic, Day or Night  
mode.  
Restaurant.  
Symbols for traffic events and points of inter-  
est (POIs) are displayed on the map, for ex-  
ample, petrol stations, train stations or inter-  
esting stopovers, provided navigation has  
Traffic information.  
Offer new guidance routes.  
POIs (points of interest) are shown on the  
map, provided the navigation has said data  
›››  
360° electric range indicator (hybrid ve-  
hicles)  
such data page 198 .  
›››  
»
page 198.  
195  
Infotainment system  
Click on a traffic event to open an additional  
Using obsolete data may lead to errors dur-  
ing navigation. Current routes cannot be  
traced or the route guidances will lead to  
mistaken destinations.  
WARNING  
window with further details page 198 .  
›››  
If you update the navigation data manually  
while driving, it may cause accidents with  
serious injuries.  
Slow traffic.  
.
Traffic jam.  
Ensure navigation data is updated at all  
times.  
Update the navigation data only with the  
vehicle at a standstill.  
Accident.  
Online updating of navigation data  
Broken down vehicle.  
Note  
The navigation data of the regions through  
which you travel frequently is automatically  
updated in the background if the Internet  
connection is established and the privacy  
settings are valid.  
Automatic update of the navigation data is  
subject to the privacy settings. In “Incogni-  
to” mode, no update is carried out.  
Slippery surface (ice or snow).  
Road closed to traffic.  
Slippery road hazard.  
With the ignition switched on, the naviga-  
Danger.  
Start route guidance  
tion data is updated automatically.  
Road works.  
Depending on the country and equipment,  
different functions are available to enter des-  
tinations.  
Manual update of navigation data  
Strong wind.  
Current navigation data for large regions, for  
example Western Europe, can be downloa-  
data devices. Navigation through USB data  
devices is not possible.  
Reduced visibility.  
The different functions for entering destina-  
tions are found in the navigation main menu.  
Opening the Navigation main menu  
Navigation data  
Press Navigation.  
Download the navigation data to a USB da-  
ta device.  
The Infotainment system is equipped with a  
built-in navigation data memory. Depending  
on the country, the necessary navigation da-  
ta may already be pre-installed.  
Select the destination and start navigation  
Turn on the ignition of the vehicle.  
1. Press .  
Connect the USB data device to the info-  
2. Select the desired destination. You can  
chose from Frequent destinations,  
Last destinations and Favourite  
destinations.  
tainment system. Navigation data is auto-  
matically updated in the background.  
To provide correct route guidance and make  
the most of the functions offered, the info-  
tainment system should be updated on a  
regular basis.  
The map version is displayed in Settings >  
System information.  
196  
Infotainment operation  
OR: press and enter the address in  
the input screen.  
To save a destination as a favourite press   
in the split screen when entering the desti-  
nation.  
Start navigation  
Press .  
OR: detailed address.  
Move the view on the map until the desired  
position can be selected. The navigation  
map can be used by means of additional fin-  
3. Press Start.  
Select the destination and start navigation  
1. Press and then .  
ger movements page 194 .  
›››  
Frequent destinations  
2. Press the desired destination.  
Press the desired destination on the map.  
The destination synopsis uses recorded data  
to propose possible destinations.  
3. Press Start.  
Press Route.  
Note  
Select the destination and start navigation  
Offroad navigation  
Enter the destination as accurately as pos-  
sible. If you enter a destination incorrectly,  
the route guidance will not be able to start  
or it will guide you to an incorrect destina-  
tion.  
1. Press and then .  
“Offroad navigation” calculates routes to se-  
lected destination points using unknown da-  
ta. When a destination point is outside the  
known roads or position data, navigation  
finds the route to the next point of the  
known road and completes the path to the  
next destination point with a direct connec-  
tion.  
2. Select the desired destination. The  
route guidance starts automatically.  
Quick start: for a quick start, press and hold  
the desired destination for a few seconds.  
Last destinations  
Start route guidance by selecting  
from the map  
Navigation saves the last destinations to  
make them available for a route guidance.  
Start navigation  
The navigation map includes active areas at  
many points that are suitable for entering the  
destination. To do this, press the desired po-  
sition or place on the map. If there is map  
data at this point, you can start a route guid-  
ance.  
Move the view on the map until the desired  
Select the destination and start navigation  
position can be selected. The navigation  
map can be used by means of additional fin-  
ger movements page 194 .  
1. Press and then .  
›››  
2. Press the desired destination.  
Press on any point on the map without po-  
3. Press Start.  
sition data.  
Quick start: for a quick start, press and hold  
the desired destination for a few seconds.  
Whether it is possible to enter the destina-  
tion through the navigation map depends on  
the state of the data and it is not possible for  
all positions.  
Press Route.  
Favourite destinations  
Save up to 20 destinations as favourites.  
To start “offroad navigation”, press an empty  
area without position data.  
197  
Infotainment system  
With an active route guidance, traffic inci-  
dents that are on the current route are  
shown in the route details. Such traffic inci-  
Start route guidance using con-  
tact details  
Function descriptions  
Route details  
dents can be avoided page 198 .  
›››  
Start route guidance with the saved address  
data of a contact. Contacts saved without  
address data cannot be used for route guid-  
ance.  
The route details contain information on all  
incidents, for example, the starting point,  
stopovers, traffic events, POIs and destina-  
tion, provided the navigation has such data.  
Hazard information  
Hazard information is shown on the naviga-  
tion map with symbols in the same way as  
traffic incidents. In this case, the source of  
this information is another vehicle that has  
detected the hazard and has uploaded the  
information to the service provider.  
If you press on an incident, an additional win-  
dow opens providing more options. The  
available options depend on the incident  
and the current settings.  
Start navigation  
Press .  
Press on the contact you want.  
Press Route.  
Open and close the route details  
The hazards shown are: accident, broken  
down vehicle and slippery road surface.  
Note  
To open, press or swipe it.  
|
If the address details of a contact are obso-  
lete, the route guidance will nevertheless  
take you to the registered address. Check  
that the contact address is updated.  
To close, press or swipe it.  
Traffic flow indication  
|
The navigation map shows traffic flow ac-  
cording to current traffic events, highlighting  
the road network in colour.  
Edit route guidance  
To edit route guidance, move the stopovers  
to the destination in the TripView view.  
Orange: Slow traffic.  
Red: Traffic jam.  
Traffic information  
Hold the desired destination pressed until  
it is visibly highlighted.  
The infotainment system receives detailed  
traffic information automatically if the Inter-  
net connection is established. This informa-  
tion is shown with symbols and highlighting  
the road network in colour on the map.  
Note  
Move the destination to the desired posi-  
tion.  
Traffic information receipt is subject to the  
privacy settings. In maximum Privacy  
mode, no traffic information is received.  
Tracking or Location level setting is neces-  
sary.  
Remove your finger from the screen. The  
route will recalculate.  
Traffic incidents  
Avoid traffic incidents  
Traffic incidents, for example, traffic jams or  
congested traffic, are shown on the naviga-  
tion map using symbols.  
The details of the route show the current  
traffic incidents if the navigation has such  
198  
Infotainment operation  
data. Avoid traffic incidents by editing route  
ternative routes are available, provided navi-  
gation has such data.  
Functions in the additional window:  
details page 198 .  
›››  
Stopping route  
guidance  
Ends the current route guidance.  
You can activate and deactivate the function  
whenever you want.  
Press on a traffic event.  
Press on Avoid. The route will recalculate.  
Close the additional window.  
Add a destination to favourites.  
Enable and disable learning usage pattern  
Split screen  
The setting is in the corresponding naviga-  
tion menu > Basic function settings.  
When handling navigation functions, an ad-  
ditional window with other options may  
open. Possible options depend on the func-  
tion being used.  
Learn usage pattern  
To activate the function, activate Learn us-  
age pattern.  
When the vehicle is in motion, navigation  
saves routes and destinations used to auto-  
matically generate destination proposals.  
Destinations are learned based on the time  
of day and the day of the week.  
To disable the function, disable Learn us-  
age pattern.  
Close the additional screen  
Press on an empty area outside the addi-  
tional window.  
To delete saved data, press Delete usage  
Navigation can propose up to 5 routes at the  
same time. The proposed routes may be dif-  
ferent from the routes of the normal route  
guidance.  
pattern.  
OR: press .  
OR: press Accept.  
360° electric range display  
3 Valid for: plug-in hybrid vehicles  
Functions in the additional window:  
If one of the proposed destinations is selec-  
ted, the guide to that destination is started.  
The 360° electric operating range display  
shows the possible range with the current  
charge level of the high voltage battery.  
Show on map  
Add stopover  
Show what is selected on the map.  
The route guidance follows the selected  
route until the vehicle deviates from it. In  
that case, the route is recalculated and takes  
you back along the most direct path to the  
initially selected destination.  
Add a stopover to the route guid-  
ance.  
Switch on the 360° electric operating  
range display  
Direct route  
Delete  
Starts direct route guidance.  
Open the additional map window and  
press the symbol .  
Delete a stopover from the route  
guidance.  
Important traffic jams are taken into account  
in the route guidance, and are avoided if al-  
Avoid  
Avoid traffic jam. The route will re-  
calculate.  
199  

Related Topics

Popular Owner Manuals