Get Infotainment system -> Telephone interface Guide for Cupra Formentor SUV First Generation (2020-2024)

Infotainment system

Telephone interface

Introduction

Fig. 137 Schematic representation: Phone

view

You can use the telephone interface to con-

nect your mobile to the infotainment system

and operate phone functions through it. The

sound is played through the vehicle's speak-

ers.

Telephone interface equipment

and symbols

Note

●

As a general rule, pairing a device (for ex-

ample, a mobile phone device) is only nec-

essary once. You can restore the device

connection via Bluetooth® or Wi-Fi with

the infotainment system whenever you

want without having to pair the device

again.

Equipment features

●

Hands-free function.

You can connect up to two mobile phone

devices simultaneously to the infotainment

system.

Use up to two phones at the same time.

Phone book with a maximum of 5,000

contacts.

●

The availability of some telephone func-

High speeds, poor weather or road condi-

tions and a noisy ambience (even outside of

the vehicle), as well as the quality of recep-

tion can all affect the quality of a telephone

conversation in the vehicle.

tions will depend on the mobile phone con-

nected to the infotainment system.

●

SMS functions via Bluetooth®: SMS read-

ing, SMS writing (templates included), SMS

playback, message history.

●

Email functions via Bluetooth®: reading

email, writing email.

200

Infotainment operation

●

Connection to wireless charging option.

Connection to the microphone mounted



Obtain information on the CUPRA

brand and selected additional services

related to traffic and your travel.

Places with special regulations

Switch off the mobile telephone and the tel-

ephone interface in places with a risk of ex-

plosion. These places are not always clearly

marked. They include, for example:

on the vehicle.



Voice mail.

Symbols in the main menu

Call list symbols











Contacts.

●

To open the call lists, press .

●

The vicinity of chemical pipelines and

tanks.

List of incoming and outgoing calls.

Enter telephone number.

Text messages (SMS and emails).

Telephone interface settings.











Incoming call.

●

The lower decks of boats and ferries.

Outgoing call.

In the proximity of vehicles that run on liq-

uefied gas (such as propane or butane).

Missed call.

Telephone number (company).

Telephone number (private).

Mobile telephone number (company).

●

Places where the air is laden with chemi-

cals or particles such as flour, dust or metal

powder.

Symbols for calls

The symbols may be different depending on

the infotainment system.





●

All other places where the vehicle engine

or telephone must be switched off.

Mobile telephone number (private).



Start a call or bringing it to the fore-

ground.





Fax (private).

Fax.

WARNING









End or reject a call.

Switch off the mobile phone in areas with a

risk of explosion!

Open contact list.

Symbols for text messages

Enter telephone number.

Mute the sound of the hands-free

Hold call.

The symbols may be different depending on

the infotainment system.

Note



In areas where special regulations apply or

the use of mobile phones is forbidden, it

must be switched off at all times. The radia-

tion produced by the mobile phone when

switched on may interfere with sensitive

technical and medical equipment, possibly

resulting in malfunction or damage to the

equipment.

●

To open the text messages, press .



Continue call.



Activate voice control input





Start conference call.

Pass call to private mode

Make an emergency call.

Get help in case of breakdown.

page 184.

›››



Templates for text messages.





201

Infotainment system

●

Optional: confirm the data transfer mes-

Connect a mobile phone device

Pair, connect and manage

sage on the mobile phone device.

Requirement: the mobile phone device is

paired with the infotainment system.

Requirement for pairing:

Active and passive connection

●

Bluetooth® is activated on the mobile

phone device.

To use the functions of the telephone inter-

face, there must be at least one mobile

phone device connected to the infotain-

ment system. If there are several mobile

phone devices connected to the infotain-

ment system, you can switch between active

and passive connections. To use the tele-

phone interface with the desired mobile

phone device, establish the active connec-

tion with the infotainment system.

phone device.

●

Bluetooth® is activated on the infotain-

ment system.

Establish an active connection

Requirement: several mobile phone devices

are connected to the infotainment system at

the same time.

●

Depending on the mobile device, it will be

necessary to have the Bluetooth® menu

open or activate the Visibility option so that

the device is visible from the infotainment

system.

●

Select the desired mobile phone device

from the drop-down menu. All other mobile

phone devices are automatically in the pas-

sive connection.

Pair a mobile phone device suitable for tel-

ephony with the infotainment system to use

the telephone interface functions. On the

first connection, the mobile phone device is

paired with the infotainment system. Doing

Difference between connection types

User profiles

The mobile phone device is paired and

connected. The functions of the tele-

phone interface are performed with the

Primary

For each of the paired mobile phone devices

an individual user profile is automatically cre-

ated. In the user profile, data from the mo-

bile phone device is stored, for example,

contact details or settings. A maximum of

four user profiles can be saved in the info-

tainment system at the same time.

so saves a user profile page 202 .

›››

data of said mobile phone device.

The pairing can take a few minutes. The

functions available depend on the mobile

phone device used and its operating system.

The mobile phone device is paired and

connected. Calls can be managed but

the phone book, messages or other

Secondary

functions will not be active.

Pair a mobile phone device

Paired mobile phone devices are stored in

the infotainment system, even if they are not

currently connected.

●

WARNING

Open the list of available Bluetooth® devi-

ces on the mobile phone device and select

the name of the infotainment system.

If you perform the pairing while driving, it

could cause an accident or injury.

●

Please note and, if necessary, confirm the

●

Perform pairing only with the vehicle at a

messages that appear on the mobile phone

device and on the infotainment system. If the

pairing was successful, the phone data is

saved in the user profile.

standstill.

202

Infotainment operation

●

The Comfort phone interface can be equip-

ped with the wireless charging function

OR: press a favourite in the telephone in-

Note

terface main menu to start the call.

●

In the pairing of some mobile phone de-

page 204.

›››

vices, a PIN number is shown on the screen

of the mobile phone device. Enter that

number in the infotainment system to com-

plete the pairing.

 Calls

In order to use the functions of the wireless

charging function, you have to place a suita-

ble mobile phone device correctly in the

storage compartment. The mobile phone

device will then connect to the vehicle an-

tenna. This improves the reception and

sound quality of calls.

The telephone interface shows the call list of

the mobile telephone device. Start a call

from the call list.

●

While the infotainment system is in the

Known mobile phones menu, the wireless

charging function is disabled. When you

exit this menu, the wireless charging func-

tion is activated again.

●

Press  > All and press a number on the

list to start the call.

●

OR: press  and filter the call list entries

(for example, missed calls or dialled num-

bers). In filtered list, press a number to start

the call.

To call

Basic and Comfort Telephony

Open the telephone interface

 Dial

Depending on the equipment, two types of

telephone interface can be used:

●

Press  Telephone.

Manually enter a phone number to start a

call. While entering the phone number, con-

tacts that match that number are shown on

the infotainment screen.

Make a call

●

Basic telephone interface.

Select a phone number to start a call. Differ-

ent functions are available for selecting a

phone number:

Comfort telephone interface.

●

Press  and enter telephone number.

Press  to start the call

Basic telephone interface

The Basic telephone interface uses the Blue-

tooth® HFP profile for transmission. This in-

terface allows the use of telephone functions

through the infotainment system and play-

back through the vehicle's speakers.

 Contacts

The last call is dialled by pressing and holding

the  button on the multifunction steering

wheel.

If a contact has several registered phone

numbers you have to select one.

●

Press  and press a number on the list to

start the call.

Comfort telephone interface

●

OR: press  and enter the contact name in

Send messages

Like the Basic telephone interface, the Com-

fort telephone interface also uses the Blue-

tooth® HFP profile.

the input field to search for it. Press on the

contact to start the call.

Depending on the mobile phone device and

the infotainment system used, you can send

»

203

Infotainment system

and receive SMS and e-mails through the tel-

ephone interface.

Each time the phone is reconnected, the

phone book is updated.

Call a favourite

●

Press the assigned speed dial button.

If conference calls are supported, the phone

book can be accessed during a call. If there

is a saved image for a contact, it can be dis-

played in the list next to the entry.

Send an SMS

Note

●

Press  > Text message > Enter new

Favourites are not updated automatically. If

you change a contact's phone number, you

have to reassign the speed dial button.

message and enter the message on the

screen.

Favourites

●

Enter the contact you want in the search

bar.

A speed dial button can be assigned to a

phone book favourite up to a maximum of

six. If there is a registered photo saved to the

contact, it is shown on the speed dial button.

●

To send the message press OK.

Connectivity Box

Send an e-mail

●

All speed dial buttons have to be manually

edited and will be assigned to a user profile.

Press  > E-mail > Enter new message

and enter the message on the screen.

●

Enter the contact you want in the search

bar.

Assign the speed dial button

●

In the Favourites menu, press the  but-

●

To send the message press OK.

ton, then open the phone book to select a

contact as a favourite. If the contact has sev-

eral phone numbers, press on the number in

the list.

Phone book, favourites and

speed dial buttons

Fig. 138 In the centre console: pad for the

mobile phone connection.

Edit the speed dial button

In the first connection of a telephone with

the infotainment system, the phone book is

saved in the infotainment system. It may be

necessary to confirm the data transmission

on the mobile phone.

The Connectivity Box includes different

functions that will help to use your mobile

device. These are:

●

To edit or delete a favourite contact press

on the icon  in the Favourites menu

screen. You can delete one or more favour-

ites.

1)

●

Wireless Charger

.

1)

It only includes the wireless charge functional-

ity.

204

Infotainment operation

●

Signal amplifier / (Mobile Signal Amplifier)

To establish a connection with the vehicle's

external aerial:

circumstances, the infotainment system in-

dicates that there is a foreign object in the

storage compartment. Using a suitable mo-

bile phone device and correcting its posi-

tion can eliminate the fault.

(Wireless Charger)

●

Place your mobile device in the middle of

The Wireless Charger allows mobile devices

with Qi¹⁾technology to be charged without a

cable.

the pad with the screen facing up Fig. 138

›››

.

›››

●

If necessary, remove any objects that

may obstruct the cover's closing function.

Make sure there are no objects between the

pad and the mobile phone.

To charge your mobile phone wirelessly:

●

Place your mobile device in the middle of

WARNING

Your mobile phone will automatically be

ready to make use of the external aerial.

the pad with the screen facing up Fig. 138

›››

●

The mobile phone may heat up due to

.

the wireless charging. Think about this be-

fore you pick it up, and take care when re-

moving it.

WARNING

Make sure there are no objects between the

pad and the mobile phone.

Notifications on the screen of the mobile

phone device can distract the driver’s at-

tention and increase the risk of a serious

accident.

●

There must be no metallic or other ob-

The mobile phone will start charging auto-

matically. For further information about

whether your mobile device supports Qi

technology, check your phone's user manual

or visit the CUPRA website.

jects between the mobile phone and the

housing, to prevent the functionality of the

Connectivity Box from being affected.

●

Place only one suitable mobile phone de-

vice, Qi compatible if applicable. For cor-

rect operation, remove the protective case

and ensure that it has maximum dimen-

sions (width x length) of 80 mm x 140 mm

(3.15 x 5.512 inches). Place on the

Connectivity Box base as per the indica-

tions.

Note

●

Your mobile device must support the Qi

Signal amplifier / (Mobile Signal Amplifier)

inductive charging interface standard for

proper operation.

It allows you to reduce radiation in the vehi-

cle and have better reception.

●

The charging time and the temperature

For safety reasons, it is recommended that

you pair the system and the mobile using

Bluetooth^®and place it on the Connectivity

Box pad, for the best reception without hav-

ing to handle the mobile phone.

vary in accordance with the device used.

●

If the mobile phone device is not placed

●

The maximum charging capacity is 5 W.

Qi technology does not allow you to

on the base of the Connectivity Box in the

correct position, or if it is larger than the

detailed dimensions, it may not be recog-

nised or charge correctly. Under certain

charge more than one mobile device simul-

taneously.

»

1)

Qi technology allows you to charge your mo-

bile phone wirelessly.

205

Infotainment system -> Telephone interface for Your Cupra Formentor SUV First Generation (2020-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals