2024-2026 Cupra Terramar SUV Parking and manoeuvring -> General information on parking systems User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Parking and manoeuvring -> General information on parking systems for Your Cupra Terramar SUV First Generation (2024-2026)

Parking and manoeuvring
229
General information on parking systems
The Auto Hold function deactivates automati-
cally if the following conditions are met:
1. The car moves o again:
Automatic gearbox: by pressing the accel-
erator.
2. The function is switched o with the ac-
tions seen in the previous sections.
WARNING
The smart technology of the Auto Hold can-
not overcome the limits imposed by the laws
of physics and it only operates within the lim-
its of the system. Never allow the enhanced
convenience of the Auto Hold function to in-
duce you to take any risk that compromises
safety.
●
Never leave the vehicle running with the
Auto Hold function switched on.
●
The Auto Hold function cannot always keep
the vehicle stopped on an uphill, or brake it
suiciently on a downhill, e.g. on slippery or
icy surfaces.
NOTICE
Always deactivate the Auto Hold function be-
fore entering an automatic car wash facility.
Failure to do so could cause damage due
to the automatic application of the parking
brake.
Note
After connecting the 12-volt battery, drive
for a short distance to reset the Auto Hold
function to operate correctly.
General information on
parking systems
Automatic brake operation
The automatic braking feature of a parking sys-
tem is used to reduce the danger of collision
when an obstacle is detected during a parking
manoeuvre.
Braking functions
Depending on the equipment, the following
systems are available:
●
Park assist plus manoeuvre braking function
›››page231.
●
Rear cross traic alert emergency brake
function ›››page256.
●
Assisted Park Assist emergency brake func-
tion ›››page235.
●
Trailer Assist manoeuvre braking function
›››page254
Infotainment system lamps
White lamp: system activated, the sys-
tem brakes when it detects an obstacle
in the path.
Coloured lamp: system deactivated, the
system does not brake when it detects
an obstacle although the sensors still
detect it.
Requirements
●
The vehicle is moving between approx.
3km/h and 8km/h when manoeuvring
●
A parking system is switched on.
The brakes are not automatically operated
when park assist is switched on automatically
while moving forward.
What happens in the event of automatic
braking?
If there is an obstacle, the system brakes the
vehicle to a standstill and keeps it stationary for
approx. 2 seconds. Press the brake!
Activating
●
Automatic braking is activated when the
driver switches a parking system on.
230
Parking and manoeuvring
Deactivating
●
The automatic brake operation function de-
activates when a park assist system is switched
o.
●
OR: to temporarily deactivate the manoeu-
vre braking function, press the function
button on the park assist screen and change
the setting.
WARNING
Never allow the automatic braking opera-
tions of park assist systems to lead you to
take any risk that compromises safety. In cer-
tain situations, the automatic braking inter-
vention may only work in a limited way or
not work at all. Collisions with obstacles can
injure people and damage the vehicle. The
system is not a replacement for driver aware-
ness.
●
Pay attention and do not rely solely on park
assist systems.
●
Always be prepared to brake and control
the steering yourself.
●
Do not take any risks that compromise
safety.
●
Act in accordance with the warnings and
driving recommendations of the parking sys-
tems.
Note
●
Switch o the parking system if the auto-
matic brakes operate excessively, e.g. when
driving o-road.
●
After the park assist’s manoeuvre braking
function has braked the vehicle, it deacti-
vates for the next 5 metres of movement
in the same direction, and becomes active
again after changing gear or changing the
position of the gear selector.
Troubleshooting
The parking system behaves dierently than
expected
There can be several causes:
●
The system requirements are not met.
●
The sensors or the camera are dirty or have
ice on them ›››
page395.
●
The camera lens is not clean and the camera
image is not clear ›››page395.
●
Some noise sources, such as a jackhammer
or a cobblestone surface can interfere with the
ultrasound signal.
●
The vehicle has some type of damage in the
sensor or camera area, e.g. due to a parking
impact.
●
The sensor detection zone or eld of view of
the camera are blocked by an accessory, e.g. a
bike rack.
●
Changes have been made to the paintwork
or structural modications in the sensor or
camera area, e.g. at the front of the vehicle or
to the running gear.
Also take into account the messages displayed
on the infotainment system display.
Sensor or camera without visibility, or the
parking system has been switched o
If a sensor fails, that sensor zone is perma-
nently switched o. The aected sensor zone
may be displayed on the infotainment system
with a symbol and a greyed-out graphic
segment. If necessary, the parking system
switches o the aected zone.
If the park assist is not working properly, a
continuous audible signal sounds for a few
seconds when it is switched on. If applicable,
a message to this eect is displayed on the
instrument cluster display
●
Check if one of the causes indicated above
has occurred.
●
Once the source of the problem has been
eliminated, the system may be reconnected.
●
If the problem persists, consult a specialised
workshop.

Related Topics

Popular Owner Manuals