2024-2026 Cupra Terramar SUV Parking and manoeuvring -> Peripheral view system (Top View Camera) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Parking and manoeuvring -> Peripheral view system (Top View Camera) for Your Cupra Terramar SUV First Generation (2024-2026)

Parking and manoeuvring
251
Peripheral view system (Top View Camera)
A
Peripheral view system
(Top View Camera)
Introduction
Using 4 cameras, the system generates a rep-
resentation that is shown on the infotainment
system display. The cameras are located on the
radiator grille, the exterior mirrors and the rear
lid.
The functions and representations of the Area
View system may vary depending on whether
or not the vehicle has ParkPilot.
WARNING
The image from the cameras does not make
it possible to calculate the distance to the
obstacles (people, vehicles, etc.) precisely,
so using them could cause serious accidents
and injury.
●
The camera lenses augment and distort the
visual eld and the objects on the screen are
seen dierently and imprecisely.
●
Certain objects may not be shown or may
not be shown very clearly, for example, posts
or thin rails, due to the screen resolution or if
light conditions are insuicient.
●
The cameras have blind spots in which ob-
stacles and people are not registered.
WARNING
The smart technology incorporated into the
Top View Camera system cannot overcome
the limits imposed by the laws of physics
and it only works within the limits of the sys-
tem. The greater convenience provided by
the Area View system should never tempt
you to take any risk that may compromise
safety. If used negligently or involuntarily,
it may cause serious accidents and injuries.
The system is not a replacement for driver
awareness.
●
Adapt your speed and driving style to
suit visibility, weather, road and traic condi-
tions.
●
Do not be distracted from the traic by
looking at the screen.
●
Monitor the area around the vehicle at
all times, since the cameras do not capture
small children, animals and certain objects in
all situations.
●
The system will probably be unable to rep-
resent all areas clearly.
NOTICE
●
The camera images are only two-dimen-
sional. Due to a lack of spatial depth, objects
that jut out or holes on the road, for exam-
ple, are more diicult to detect or may not be
seen at all.
●
In certain circumstances, the camera does
not capture objects such as beams, fences,
posts or thin trees, which could damage the
vehicle.
●
The system displays the auxiliary lines and
boxes regardless of the vehicle's surround-
ings and whether or not objects are detec-
ted. The driver is responsible for determining
that the vehicle will t in the parking space.
Area View system
Fig.162 Display of the Area View system:
aerial view.
There are four dierent views to choose from
›››
Fig.162:
Front camera area
252
Parking and manoeuvring
B
C
D
Right camera area
Rear camera area
Left camera area
Function buttons:
Depending on the equipment: connect-
ing and disconnecting the ParkPilot
sound.
The aerial view is generated by combining the
images from all the cameras ›››Fig.162.
The top view can be selected by pressing the
vehicle inside the zone.
The system will automatically switch between
front and rear camera view according to the
direction of travel.
Press on the dierent areas ›››Fig.162
A
to
D
of the top view or reduced top view to select
and set the corresponding view, which will be
highlighted in orange.
Conditions necessary for the use of the Area
View system
●
The doors and the rear lid must be closed.
●
The image must be reliable and clear. For this
reason, for example, the camera lens must be
clean.
●
The area around the vehicle must be clearly
and totally visible.
●
The area for parking or manoeuvring should
be a at surface.
●
The vehicle should not be loaded very heav-
ily at the rear.
●
The driver must be used to the system.
●
There should be no damage to the vehicle in
the camera area. If the position or installation
angle of the cameras have been changed, e.g.
after a rear-end collision, the system should be
checked by a specialised workshop.
Special characteristics
The images on the area view system cameras
are only two-dimensional. Due to a lack of spa-
tial depth, it is diicult or impossible to make
out on-screen any holes there may be on the
ground, objects jutting out from the ground or
parts protruding from other vehicles.
Situations in which the objects or other vehi-
cles appear to be further away or closer than
they really are:
●
On moving from a horizontal plane to a
slope.
●
On moving from a slope to a horizontal
plane.
●
If the vehicle is heavily loaded at the rear.
●
If the vehicle approaches protruding objects.
These objects may be outside the cameras'
angle of visibility.
Trailer mode
The Area View system conceals, in the rear
camera area, all the auxiliary guiding lines
when the factory-tted towing bracket is con-
nected electrically to a trailer ›››page322.
Note
To become familiar with the system and
its functions, CUPRA recommends that you
practice handling the Area View system in an
area where there is not too much traic or in
a car park.
Connecting and disconnecting
Connecting
●
Select reverse gear.
●
OR: in the infotainment system select >
Assistants > Parking assistant > Park assist.
Switching o
●
Drive forward at a speed of at least 15 km/h
(9 mph).
●
OR: press the function button.
Views of the peripheral vision sys-
tem (modes)
The red lines indicate a distance of approx. 40
cm away from the vehicle.

Related Topics

Popular Owner Manuals