AUTOMATIC LOCKING WHEN DRIVING
1
1
1
Operating principle
To deactivate
Operating faults
After the vehicle is started, the system
automatically locks the doors once your
speed reaches approximately 5 mph
(7 km/h).
With the ignition on, press and hold
switch 1 for approximately 5 seconds,
until you hear a beep.
If you notice an operating fault (auto-
matic locking impossible), first check
that all doors are correctly locked. If
they are correctly locked and the fault
is still present, contact an approved
Dealer.
To activate
Also make sure that locking has not
been inadvertently deactivated.
With the ignition on, press and hold
switch 1 for approximately 5 seconds,
until you hear a beep. The indica-
tor light built into the switch comes on
when the doors are locked.
If this is the case, reactivate it.
If you decide to keep the
doors locked when you
are driving, remember that
it may be more difficult for
those assisting you to gain access
to the passenger compartment in
the event of an emergency.
1.8
English 
