FRONT SEATS (1/2)
4
1
5
6
3
2
To move forwards or
backwards
To tilt the seatback
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
Depending on the vehicle, move the
control knob 3 or handle 5 and tilt the
seatback to the desired position.
Lift bar 1 to release. Release the bar
once the seat is in the correct position
and ensure that the seat is fully locked
into position.
We would advise you not to recline
the seatbacks too far to ensure that
the effectiveness of the seat belts is
not reduced.
To adjust the lumbar support
on the driver’s seat
To raise or lower the driver’s
seat surface
Turn control knob 4 to the required po-
sition..
Make sure that the seatbacks are
correctly locked in place.
Depending on the vehicle, lift lever 2
or 6, adjust the seat base to the desired
height, then release the lever.
Nothing should be placed on the
floor (area in front of driver) as such
objects may slide under the pedal
during braking manoeuvres, thus
obstructing its use.
1.13
English 
