2017-2023 Dacia Duster SUV Getting to know your vehicle -> On-board computer User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Getting to know your vehicle -> On-board computer for Your Dacia Duster SUV Second Generation (2017-2023)

ON-BOARD COMPUTER (1/6)  
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.  
Resetting the trip mileage  
To reset the trip mileage recorder, the  
display must show the Trip mileometer  
function.  
3
4
Press and hold button 2 or 4.  
1
2
f) Estimated range  
g) Distance travelled  
h) Average speed  
i) Oil change interval  
j) Speed limiter  
On-board computer 1 or 3  
Display selection key 2 or 4  
Scroll through the following information  
by repeatedly pressing button 2 or 4:  
a) Total mileage recorder  
b) Trip mileage recorder  
c) Fuel consumed  
k) Time  
l) Exterior temperature  
m)reset the tyre pressure.  
d) Average fuel consumption  
e) Current fuel consumption  
Refer to the table on the following  
pages showing display examples.  
1.54  
ON-BOARD COMPUTER (2/6)  
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.  
– You may also notice that the ave-  
rage fuel consumption increases  
when the vehicle is stationary and  
the engine idling.  
Interpreting some of the  
values displayed after  
resetting  
The values showing average fuel  
consumption, range and average  
speed will become more stable and re-  
liable the further you travel after pres-  
sing the reset button.  
This is normal, since the computer  
takes account of fuel used during  
idling.  
Manually resetting the journey para-  
meters: with the display showing one  
of the journey parameters, press the  
button 2 until the display is reset.  
For the first few miles after pressing  
the reset key you will notice that the  
range increases as you travel. This  
range takes into account the average  
fuel consumption since the last time the  
reset button was pressed. Therefore,  
the fuel consumption may decrease  
when:  
Automatically resetting the journey  
parameters: the reset is automatic  
when the capacity of one of the memo-  
ries is exceeded.  
– the vehicle stops accelerating,  
– the engine reaches its operating  
temperature (engine cold when  
reset button pressed),  
– when driving from a built-up area  
onto the open road.  
Therefore, if the average fuel  
consumption decreases, the  
range will increase.  
1.55  
ON-BOARD COMPUTER (3/6)  
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.  
Examples of display selections by repeatedly  
pressing 2 or 4  
Interpreting the display selected  
Display A  
Display B  
Display C  
a) Total mileage recorder.  
b) Trip mileage recorder.  
c) Fuel used since the last time the reset button was  
pressed.  
d) Average fuel consumption since the last time the  
reset button was pressed.  
This value is displayed after driving 400 metres and  
takes into account the distance travelled and the fuel  
used since the last time the reset button was pressed.  
1.56  
ON-BOARD COMPUTER (4/6)  
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.  
Examples of display selections by repeatedly  
pressing 2 or 4  
Interpreting the display selected  
Display A  
Display B  
Display C  
e) Current fuel consumption.  
This value is displayed after a speed of approximately  
20 mph (30 km/h) is reached.  
f) Estimated range with remaining fuel.  
This range takes into account the average fuel  
consumption since the last time the reset button was  
pressed.  
The value is displayed after driving around  
400 metres.  
g) Distance travelled since the last time the reset  
button was pressed.  
h) Average speed since the last reset.  
The value is displayed after driving around  
400 metres.  
1.57  
ON-BOARD COMPUTER (5/6)  
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.  
Examples of display selections by repeatedly  
pressing 2 or 4  
Interpreting the display selected  
Display A  
Display B  
Display C  
j) Mileage before service  
Distance remaining until the next oil change.  
There are several scenarios:  
– mileage before oil change service less than 1000 miles  
Warning light Ê on the instrument panel comes on ac-  
companied by the message “1000 miles”.  
– mileage before oil change service 0 miles. Warning light  
Ê on the instrument panel comes on accompanied by  
the message “--- miles”.  
The distance appears on the display for approximately  
8 seconds when the ignition is switched on as soon as the  
distance is less than or equal to 1000 miles.  
The vehicle requires an oil change as soon as possible.  
Note: depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low  
speed, door-to-door journeys, extensive use at idle speed, towing a trailer etc.). The distance remaining until the next oil change  
can therefore decrease more quickly in some cases than the actual distance travelled.  
The oil change intervals are independent of the vehicle’s maintenance schedule: please refer to your vehicle’s maintenance do-  
cument.  
Resetting: to reset the mileage before an oil change, press and hold the display reset button for approximately 10 seconds until  
the display shows the range permanently.  
1.58  
ON-BOARD COMPUTER (6/6)  
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.  
Examples of display selections by repeatedly  
pressing 2 or 4  
Interpreting the display selected  
Display A  
Display B  
Display C  
j) Cruise control and speed limiter programmed speed  
(if activated).  
Refer to the information on the “Speed limiter” and “Cruise  
control” in Section 2.  
k) Time.  
l) Exterior temperature.  
m) Reset the tyre pressure.  
Please refer to the information on the “Tyre pressure loss  
warning” in Section 2.  
1.59  

Related Topics

Popular Owner Manuals