Get Getting to know your vehicle -> Child safety: mounting a child seat Guide for Dacia Duster SUV Second Generation (2017-2023)

CHILD SAFETY: mounting a child seat (1/2)

Attachment via the seat belt

Attachment with the ISOFIX system

The seat belt must be adjusted to

ensure that it is effective in the event of

harsh braking or an impact.

Authorised ISOFIX child seats are ap-

proved in accordance with regulation

ECE-R44 in one of the three following

cases:

– ISOFIX universal 3-point forward-

facing seat;

Ensure that the strap paths indicated

by the child seat manufacturer are re-

spected.

The seat belt must never

be twisted or the tension

relieved. Never pass the

shoulder strap under the

– ISOFIX semi-universal 2-point seat;

– specific.

Always check that the seat belt is cor-

rectly fastened by pulling it up, then

pulling it out fully whilst pressing on the

child seat.

For the latter two, check that your child

seat can be installed by consulting the

list of compatible vehicles.

arm or behind the back.

Check that the seat belt has not

been damaged by sharp edges.

If the seat belt does not operate nor-

mally, it will not protect the child.

Consult an approved dealer. Do not

use this seat until the seat belt has

been repaired.

Check that the seat is correctly held by

moving it from side to side and back

to front: the seat should remain firmly

fixed.

Attach the child seat with the ISOFIX

locks, if these are provided. The ISOFIX

system allows quick, easy, safe fitting.

The ISOFIX system is composed of

2 rings for each rear side seat.

Check that the child seat has not been

installed at an angle and that it is not

resting against a window.

Before using an ISOFIX

child seat that you pur-

chased for another vehicle,

check that its installation is

authorised. Consult the list of ve-

hicles which can be fitted with the

seat from the equipment manufac-

turer.

Do not use the child seat

if it may unfasten the seat

belt restraining it: the base

of the seat must not rest on

the buckle and/or catch of the seat

belt.

No modifications may be

made to the component

parts of the restraint system

(seat belts, ISOFIX, seats

and their mountings) originally fitted.

1.28

CHILD SAFETY: mounting a child seat (2/2)

The rings ISOFIX 1 are located be-

tween the seatback and the seat base

and are clearly visible.

The third ring of each side seat is used

to attach the upper strap on some child

seats.

Attach the hook on the belt to one of the

rings 3 (4x2 version) or 4 (4x4 version).

Pull the belt so that the back of the child

seat comes into contact with the back

of the vehicle seat.

To ensure your child seat can be easily

fitted and locked on rings 1, use access

guides 2 on the child seat.

Pass the belt between the seatback

and the rear parcel shelf (to remove the

parcel shelf: refer to Section 3 “Parcel

shelf”).

The ISOFIX anchorage points have been exclusively designed for child

seats with the ISOFIX system. Never fit a different type of child seat, seat

belt or other objects to these anchorage points.

It is essential to use the

boot anchorage points 3

or 4 to attach the upper belt

of the child seat.

Check that nothing is obstructing the anchorage points.

It is forbidden to use other mounting

points to attach this strap.

If your vehicle has been involved in a road accident, have the ISOFIX anchorage

points checked and replace your child seat.

1.29

Getting to know your vehicle -> Child safety: mounting a child seat for Your Dacia Duster SUV Second Generation (2017-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals