2021-2026 Dacia Sandero 4 Door Driving -> SPEED LIMITER User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving -> SPEED LIMITER for Your Dacia Sandero 4 Door Third Generation (2021-2026)

SPEED LIMITER (1/4)  
Controls  
1 Speed limiter On/Off switch.  
2 Cruise control On/Off switch.  
3 Switch to activate and decrease the  
limit speed (SET/-).  
4 Switch to activate and increase the  
limit speed or to set the stored limit  
speed (RES/+).  
5
1
4
5 Speed limiter function standby (with  
limited speed memory) (0).  
3
2
The speed limiter function helps you  
stay within the driving speed limit that  
you choose, known as the limit speed.  
2.57  
SPEED LIMITER (2/4)  
6
7
1
4
3
To store the current speed, press the 4  
switch (RES/+) or the 3 switch (SET/-ꢀ):  
the limit speed replaces the dashes  
and, depending on the vehicle, the 6  
warning light appears in white.  
The minimum stored speed is 20 mph  
(30 km/h).  
Driving  
Switching on  
When a limit speed has been set but  
not yet reached, driving is similar to  
driving a vehicle without the speed lim-  
iter function.  
Press switch 1. The warning indica-  
tor 6 lights up in grey or, depending on  
the vehicle, 7 in orange. The message:  
“Speed limiter ON” or, depending on ve-  
hicle, the warning indicator ap-  
pears on the instrument panel accom-  
panied by dashes to indicate that the  
speed limiter function is activated and  
waiting to store a speed limit.  
Once you have reached the stored  
speed, no effort on the accelera-  
tor pedal will allow you to exceed  
the programmed speed except in an  
emergency (refer to information on  
“Exceeding the limit speed”).  
2.58  
SPEED LIMITER (3/4)  
Limited speed cannot be maintained  
Exceeding the limit speed  
When driving down a steep gradient,  
the system may not maintain the speed  
limit: the speed limit flashes in red on  
the instrument panel and an audible  
signal warns you at regular intervals.  
It is possible to exceed the limit speed  
at any time. To do this: press the accel-  
erator pedal firmly and fully (beyond  
the resistance point).  
While the speed is being exceeded,  
the programmed speed displayed on  
the instrument panel flashes. Then, re-  
lease the accelerator pedal: the speed  
limiter function will return as soon as  
you reach a speed lower than the mem-  
orised speed.  
4
3
Varying the limit speed  
The limit speed may be changed by  
pressing repeatedly or holding down:  
– switch 4 (RES/+) to increase speed;  
– switch 3 (SET/-) to reduce speed.  
If the speed limiter is not  
available (after several at-  
tempts to activate), contact  
an approved dealer.  
2.59  
SPEED LIMITER (4/4)  
6
7
5
1
4
3
2
Putting the function on  
standby  
The speed limiter function is suspended  
when you press switch 5 (0). The limit  
speed is stored and displayed in grey  
on the instrument panel.  
Switching off the function  
The speed limiter function is inter-  
rupted:  
– when you press the 1 switch. In this  
case, the speed is no longer stored;  
– when you press the 2 switch. In this  
case the cruise control is selected  
and there is no stored speed.  
Recalling the limit speed  
If a speed has been stored, it can be re-  
called by pressing the 4 switch.  
The warning light 6 or, depending on  
vehicle, orange warning light 7 on the  
instrument panel switches off to confirm  
that the function is off.  
When the speed limiter is set to  
standby, pressing the 3 switch  
re-activates the function without  
taking into account the memorised  
speed: the speed at which the vehi-  
cle is moving is taken into account.  
2.60  

Related Topics

Popular Owner Manuals