FUSES (1/3)
A
B
3
2
1
Fuse box
Tweezers 3
If any electrical component does not
work, check the condition of the fuses.
Remove the fuse using the tweezers 3
located on the back of flap A or B.
Unclip the A flap using the 1 notch or,
depending on the vehicle, unclip the B
flap using the 2 notch.
To remove the fuse from the tweezers,
slide the fuse to the side.
Check the fuse in question
and replace it, if necessary,
with a fuse of the same
rating.
It is not advisable to use the free fuse
locations.
Depending on the vehicle, to identify
the fuses, refer to the fuse allocation
label located at the back of the A or B
flap and shown on the following pages.
If a fuse is fitted where the rating is
too high, it may cause the electrical
circuit to overheat (risk of fire) in the
event of an item of equipment using
an excessive amount of current.
To comply with current legislation, or
as a precaution, you can obtain an
emergency kit from your approved
dealer containing a set of spare
bulbs and fuses.
5.33
English 
