2021-2026 Dacia Sandero 4 Door Practical advice -> REAR LIGHTS AND SIDE LIGHTS: changing bulbs User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Practical advice -> REAR LIGHTS AND SIDE LIGHTS: changing bulbs for Your Dacia Sandero 4 Door Third Generation (2021-2026)

REAR LIGHTS AND SIDE LIGHTS: changing bulbs (1/8)  
2
3
6
4
5
1
2
Pull on tabs 2 to unclip the bulb holders.  
Bulb type  
Four-door version  
To refit, proceed in the reverse order,  
taking care not to damage the wiring.  
3 Side light  
Side lights/brake lights, direction  
indicator lights and reversing lights  
W5W bulb.  
Check the tabs are correctly locked in  
position.  
4 Side light/brake light  
P21/5W bulb.  
5 Reversing light  
P21W bulb.  
Loosen the bolt 1, then remove the rear  
light unit from outside the vehicle.  
6 Indicator light  
PY21W bulb.  
The bulbs are under pres-  
To comply with current legislation, or  
sure and can break when  
as a precaution, you can obtain an  
replaced.  
emergency kit from your approved  
dealer containing a set of spare  
bulbs and fuses.  
Risk of injury.  
5.21  
REAR LIGHTS AND SIDE LIGHTS: changing bulbs (2/8)  
9
10  
8
7
8
12  
11  
Pull on tabs 8 to unclip the bulb holders.  
Bulb type  
Four-door version  
(depending on vehicle)  
To refit, proceed in the reverse order,  
9 Brake light or, depending on the  
taking care not to damage the wiring.  
vehicle, side light/brake light  
Side lights/brake lights, direction  
indicator lights and reversing lights  
Check the tabs are correctly locked in  
position.  
P21/5W bulb.  
10 LED side light  
(depending on vehicle)  
Consult an approved dealer.  
11 Reversing light  
P21W bulb.  
Loosen the bolt 7, then remove the rear  
light unit from outside the vehicle.  
12 Indicator light  
PY21W bulb.  
The bulbs are under pres-  
sure and can break when  
replaced.  
To comply with current legislation, or  
as a precaution, you can obtain an  
emergency kit from your approved  
dealer containing a set of spare  
bulbs and fuses.  
Risk of injury.  
5.22  
REAR LIGHTS AND SIDE LIGHTS: changing bulbs (3/8)  
14  
15  
13  
Rear fog lights 13  
High level brake light 14  
The front bumper needs to be removed;  
consult an authorised dealer.  
The bulb 15 for the high-level brake  
light 14 may be accessed through the  
luggage compartment.  
Bulb type 13: P21W.  
Bulb type 15: W16W.  
The bulbs are under pres-  
sure and can break when  
replaced.  
To comply with current legislation, or  
as a precaution, you can obtain an  
emergency kit from your approved  
dealer containing a set of spare  
bulbs and fuses.  
Risk of injury.  
5.23  
REAR LIGHTS AND SIDE LIGHTS: changing bulbs (4/8)  
16  
17  
18  
21  
19  
20  
17  
Pull on tabs 17 to unclip the bulb hold-  
ers.  
Bulb type  
Five-door version  
18 Side light  
W5W bulb.  
Side lights/brake lights, direction  
indicator lights and reversing lights  
To refit, proceed in the reverse order,  
taking care not to damage the wiring.  
19 Side light/brake light  
P21/5W bulb.  
Loosen the bolt 16, then remove the  
rear light unit from outside the vehicle.  
Check the tabs are correctly locked in  
position.  
20 Reversing light  
P21W bulb.  
21 Indicator light  
PY21W bulb.  
The bulbs are under pres-  
To comply with current legislation, or  
sure and can break when  
as a precaution, you can obtain an  
replaced.  
emergency kit from your approved  
dealer containing a set of spare  
bulbs and fuses.  
Risk of injury.  
5.24  
REAR LIGHTS AND SIDE LIGHTS: changing bulbs (5/8)  
A
B
B
A
23  
22  
High level brake light 22  
Access the bulb 23.  
Using a flat-blade screwdriver or similar,  
carefully unclip the brake light 22 while  
pressing on the upper surface of the  
brake light (movement A). Disconnect  
the brake light.  
Bulb type 23: W16W.  
To refit, position the brake light on the  
spoiler.  
Press the upper edge of the part (move-  
ment B), then push the surface of the  
light in the areas where the clips are lo-  
cated until it clicks (movement C).  
C
C
However, because of their reduced  
accessibility, we advise you to have  
your bulb replaced by an Approved  
Dealer.  
The bulbs are under pres-  
sure and may break when  
replaced.  
Risk of injury.  
5.25  
REAR LIGHTS AND SIDE LIGHTS: changing bulbs (6/8)  
Refitting  
To refit, proceed in the reverse order,  
taking care not to damage the wiring.  
Once the bulb has been replaced,  
check that it is properly secured.  
However, because of their reduced  
accessibility, we advise you to have  
your bulb replaced by an Approved  
24  
Dealer.  
Rear fog lights 24  
Access the bulb holder located under  
the rear bumper, then unscrew it by  
turning towards the centre of the vehi-  
cle and remove the bulb.  
To comply with current legislation, or  
as a precaution, you can obtain an  
emergency kit from your approved  
dealer containing a set of spare  
bulbs and fuses.  
Bulb type 24: P21W.  
Any operation on (or modi-  
fication to) the electrical  
system must be performed  
by an approved Dealer  
since an incorrect connection might  
damage the electrical equipment  
(harness, components and in partic-  
ular the alternator). In addition, your  
Dealer has all the parts required for  
fitting these units.  
The bulbs are under pres-  
sure and can break when  
replaced.  
Do not touch the exhaust.  
Risk of injury.  
Risk of burns.  
5.26  
REAR LIGHTS AND SIDE LIGHTS: changing bulbs (7/8)  
25  
26  
27  
28  
Four and five door versions  
Number plate lights 27  
Unclip light 27 by pressing tab 25 using  
a flat-blade screwdriver or similar.  
To comply with current legislation, or  
as a precaution, you can obtain an  
emergency kit from your approved  
dealer containing a set of spare  
bulbs and fuses.  
Unclip lens 26 and take out bulb 28.  
Bulb type: W5W.  
LED number plate lights 27  
(depending on vehicle)  
Consult an approved dealer.  
The bulbs are under pres-  
sure and can break when  
replaced.  
Risk of injury.  
5.27  
REAR LIGHTS AND SIDE LIGHTS: changing bulbs (8/8)  
29  
B
C
30  
A
31  
Unclip the indicator light 29 using a flat-  
blade screwdriver or similar positioned  
at A to flip the indicator light towards  
the outside of the vehicle.  
Turn bulb holder 30 a quarter of a  
turn (movement B) and take out  
bulb 31 (movement C).  
Bulb type: WY5W.  
Replace the bulb and refit the indicator  
light.  
The bulbs are under pres-  
sure and can break when  
replaced.  
To comply with current legislation, or  
as a precaution, you can obtain an  
emergency kit from your approved  
dealer containing a set of spare  
bulbs and fuses.  
Risk of injury.  
5.28  

Related Topics

Popular Owner Manuals