PUNCTURE, EMERGENCY SPARE WHEEL (1/2)
Emergency spare wheel
Vehicle fitted with a tyre pressure
loss warning system
This is located in the luggage compart-
ment.
In the event of under-inflation (punc-
tures, under-inflation, etc.), the
warning light appears on the instrument
panel. ➥ 2.33.
Five-door version
2
1
To access it:
– open the boot;
– remove the boot cover or fold it fully;
– depending on the vehicle, position
the mobile floor in the intermediate
position ➥ 3.36;
– depending on the vehicle, lift the lug-
gage compartment carpet to the ver-
tical position and rest it against the
folded-back cover;
– unscrew the central mounting 1;
– take out the emergency spare
wheel 2.
Never leave tools unse-
cured in the vehicle: there
is a risk that they may be
In the event of a puncture,
depending on the vehicle,
you will have:
An emergency spare wheel or tyre in-
flation kit (refer to the information on the
following pages).
thrown about during brak-
ing. After use, make sure the tools
are correctly positioned in their
housings: there is a risk of injury.
If bolts are supplied with the emer-
gency spare wheel, it is imperative
that they are used and that they
are used for the emergency spare
wheel only: refer to the label affixed
to the emergency spare wheel.
The jack is designed for wheel
changing purposes only. Under no
circumstances should it be used for
carrying out repairs underneath the
vehicle or to gain access to the un-
derside of the vehicle.
Four-door version
To access it:
– open the boot;
– depending on the vehicle, remove
the boot compartmentalisation com-
ponents ➥ 3.36;
– lift the luggage compartment carpet;
– unscrew the central mounting 1;
– take out the emergency spare
wheel 2.
5.2
English 
