66
03
Ease of use and comfort
The connection of an unapproved
electrical device, such as a USB charger,
may adversely affect the operation of vehicle
electrical systems, causing faults such as poor
radio reception or interference with displays in
the screens.
Load space cover shelf
It consists of two sections:
– a fixed section with an open storage space.
– a movable section which rises when the boot is
opened, with an open storage space.
2-position boot floor
This two-position floor allows the boot volume to
be optimised using the lateral stops located on
the sides:
– High position (100 kg max.): to obtain a flat
floor up to the front seats, when the rear seats
are folded down.
To keep it in the inclined position:
►ꢀ From the high position, lift the floor towards
the load space cover.
►ꢀ Take it past the retractable stops, then rest
the floor on these stops.
To remove the load space cover shelf:
►ꢀ Unhook the two cords.
►ꢀ Raise the movable section slightly, then unclip
it on each side.
– Low position (150 kg max.): maximum boot
volume.
Storage well
On certain versions, the adjustable boot
floor cannot be fitted in the low position.
►ꢀ Unclip the fixed section on each side, then
take out the load space cover shelf.
To change the height:
►ꢀ Lift and pull the floor towards you using its
central handle, then use the lateral stops to move
it.
►ꢀ Push the floor all the way forwards to place it
in the desired position.
In the event of sudden deceleration,
objects placed on the load space cover
shelf can turn into projectiles.
12 V accessory socket
►ꢀ To connect a 12 V accessory (maximum
power: 120 W), lift the cover and plug in a suitable
adaptor.
►ꢀ Fully raise the boot floor or lift the hinged
floor carpet (depending on version) to access the
storage well.
►ꢀ Switch on the ignition.
English 
