Ease of use and comfort -> Interior ambience lighting for Your DS 7 Crossback 4 Door First Generation (2017-2022)

64  
03  
Ease of use and comfort  
The approved mats have two fasteners located  
underneath the seat.  
Mats  
Front touch-sensitive courtesy  
lamp  
Fitting  
It comes on gradually:  
– when the vehicle is unlocked.  
– when the ignition is switched off.  
– when a door is opened.  
– when the remote control locking button is  
activated, in order to locate the vehicle.  
It switches off:  
Touch-sensitive courtesy  
lamps  
– when the vehicle is locked.  
– when the ignition is switched on.  
– 30 seconds after the last door is closed.  
The front and rear touch-sensitive reading lamps  
come on and go off at the same time as the  
courtesy lamp.  
A long press on the courtesy lamp completely  
deactivates it from coming on (confirmed by the  
"OFF" symbol).  
When fitting the mat for the first time, on the  
driver's side use only the fasteners supplied in the  
enclosed sachet.  
The other mats are simply laid over the carpet.  
Removing/refitting  
1. Front touch-sensitive courtesy lamp  
2. Front touch-sensitive reading lamps  
►ꢀ To remove it on the driver's side, move the seat  
backwards and unclip the fasteners.  
►ꢀ To refit it, position the mat and secure it by  
pressing.  
Touch-sensitive reading lamps  
►ꢀ With the ignition on, press the corresponding  
reading lamp.  
►ꢀ Check that the mat is secured correctly.  
To avoid any risk of jamming the pedals:  
– Only use mats which are suitable for  
the fasteners already present in the vehicle;  
these fasteners must be used.  
– Never fit one mat on top of another.  
The use of mats not approved by the  
Manufacturer may interfere with access to the  
pedals and hinder the operation of the cruise  
control/speed limiter.  
Interior ambience lighting  
The dimmed passenger compartment lighting  
improves visibility in the vehicle when the light  
is poor.  
At night, the ambience lighting automatically  
comes on / switches off when the sidelamps are  
switched on / off.  
3. Rear touch-sensitive reading lamps  
65  
03  
Ease of use and comfort  
Activation / deactivation and adjustment  
of the light intensity as well as the choice  
of colour are set via the Driving / Vehicle touch  
screen menu.  
►ꢀ Lower the flap.  
►ꢀ Load the objects from inside the boot.  
Rear armrest  
Boot fittings  
The passenger compartment ambience  
lighting is also managed by the DS  
SENSORIAL DRIVE function.  
For more information on the DS SENSORIAL DRIVE  
function, refer to the corresponding section.  
Rear fittings  
The armrest incorporates two cup holders.  
USB sockets  
Ski flap  
Mechanism for storing and transporting long  
objects.  
1. Load space cover  
2. 12 V accessory socket (120 W)  
3. Boot lamp  
Opening  
4. Rear seat folding controls  
5. Hooks  
►ꢀ Lower the rear armrest.  
►ꢀ Pull the flap handle downwards.  
6. Stowing rings  
7. Adjustable boot floor (2-position)  
8. Storage well/Tool box under the floor  
Each USB socket is used only to power or recharge  
the connected portable device.  
The stowing rings are designed to secure  
luggage using different types of retaining  
nets.  
These nets are available as an accessory.  
For more information, contact a dealer.