49
03
Ease of use and comfort
►ꢀ Push the lever to change to the normal "day"
position.
►ꢀ Press the lug A to release the head restraint
Rear head restraints
and push it down.
Adjustment
►ꢀ Set the mirror to the normal “day” position.
Never drive with passengers seated at the
rear when the head restraints are
removed; the head restraints should be in
place and in the high position.
Automatic "electrochrome" model
The head restraint for the centre seat
and those for the outer seats are not
interchangeable.
Backrest angle
This system automatically and progressively
transitions between day and night modes, using a
sensor that measures the light entering from the
rear of the vehicle.
They have two positions:
– A high position, for when the seat is in use:
►ꢀ Pull the head restraint fully up.
– A low position, for stowing, when the seat is
not in use:
►ꢀ Press the lug A to release the head restraint
and push it down.
To ensure optimum visibility during your
manoeuvres, the mirror lightens
automatically when reverse gear is engaged.
The rear head restraints can be removed.
Removing a head restraint
Rear seats
Bench seat with fixed cushions and split folding
and reclining backrests (2/3-1/3).
►ꢀ Pull the head restraint fully up.
►ꢀ Press the lug A to release the head restraint
and remove it completely.
►ꢀ To bring the backrest 3 up or down, press
control 2 or pull it to the desired position.
Refitting a head restraint
When you adjust the backrest and the
boot is loaded, check that nothing can
hinder the backrest from moving.
Risk of damaging the backrest.
►ꢀ Insert the head restraint rods into the guides
in the corresponding seat backrest.
►ꢀ Push the head restraint down as far as it will
go.
English 
