Get Ease of use and comfort -> Mirrors Guide for DS 7 Crossback 4 Door First Generation (2017-2022)

Ease of use and comfort

Prolonged use of heated seats is not

recommended for people with sensitive

If the settings suit you and you make no changes,

the display returns to its original state.

The multipoint massages are also

managed by the DS SENSORIAL DRIVE

function.

For more information on the DS SENSORIAL DRIVE

function, refer to the corresponding section.

To modify the settings:

Steering wheel

adjustment

skin.

There is a risk of burns for people whose

perception of heat is impaired (illness, taking

medication, etc.).

To keep the heated pad intact and to prevent a

short circuit:

– Do not place heavy or sharp objects on the

seat.

►ꢀ Select another type of massage from the five

offered.

– Do not kneel or stand on the seat.

– Do not spill liquids onto the seat.

– Never use the heating function if the seat

is damp.

►ꢀ Select a massage intensity from the three

levels offered: "1" (Low), "2" (Normal) or "3"

(High).

The changes are applied immediately.

Once activated, the system starts a one hour

massage cycle, made up of sequences of 6

minutes of massage followed by 3 minutes at

rest.

►ꢀ When stationary, pull the control to release

the steering wheel.

►ꢀ Adjust the height and reach to suit your driving

position.

Multipoint massage

System with a choice of type of massage and

adjustment of its intensity.

This system operates with the engine running, as

well as in STOP mode of Stop & Start.

The massage settings are adjusted in the touch

screen.

►ꢀ Push the control to lock the steering wheel.

The system automatically stops at the end of the

cycle; the indicator lamp for the button goes off.

For safety reasons, these adjustments

must only be carried out with the vehicle

stationary.

The system is switched on, either directly using

the button on the front seat, or by activating a

personalised ambience with the DS SENSORIAL

DRIVE function.

Using the button on the front seat:

►ꢀ Press this button; its indicator lamp

comes on.

The system is immediately activated with the last

settings used and the settings page is displayed

on the touch screen.

Mirrors

Door mirrors

Each fitted with an adjustable mirror glass

permitting the lateral rearward vision necessary

for overtaking or parking.

They can also be folded in for parking in narrow

spaces.

Ease of use and comfort

In versions fitted with “electrochrome” mirrors, a

system connected to a brightness sensor darkens

the mirror and reduces the nuisance to the driver

caused by low sun or headlamp beams from other

vehicles.

Folding

– Once the vehicle speed exceeds 6 mph

(10 km/h),

– When the engine is switched off.

It is set via the Driving / Vehicle touch

screen menu.

Automatic: lock the vehicle using the electronic

key.

Manual: with the ignition on, move control

A downwards.

If the mirrors are folded using control A,

they will not unfold when the vehicle is

unlocked.

Adjustment

Demisting/Defrosting

If the vehicle is so equipped, demisting/

defrosting of the heated door mirrors is

performed when the heated rear screen is

switched on.

For more information on Rear screen demisting/

defrosting, refer to the corresponding section.

Unfolding

Automatic: unlock the vehicle using the electronic

key.

Manual: with the ignition on, move control

A upwards.

The mirrors can be folded manually if necessary.

Rear view mirror

Equipped with an anti-dazzle system, which

darkens the mirror glass and reduces the

nuisance to the driver caused by the sun,

headlights of other vehicles, etc.

The automatic folding and unfolding of

the door mirrors with the remote control

can be set via the Driving / Vehicle touch

screen menu.

►ꢀ Turn control A to the right or to the left to

select the corresponding mirror.

►ꢀ Move the control in any of the four directions

to adjust.

►ꢀ Return the control to the central position.

Manual model

Fold the mirrors when putting your vehicle

through an automatic car wash.

Day/night position

As a safety measure, the mirrors should

be adjusted to reduce the blind spots.

The objects observed are, in reality, closer than

they appear. Take this into account in order

to correctly judge the distance of vehicles

approaching from behind.

Automatic tilting in reverse gear

Function which automatically tilts the mirrors

downwards to assist with parking manoeuvres in

reverse gear.

With the engine running, on engaging reverse

gear, the mirror glasses tilt downwards.

They return to their initial position:

►ꢀ Pull the lever to change to the anti-dazzle

"night” position.

– A few seconds after coming out of reverse gear.

Ease of use and comfort

►ꢀ Push the lever to change to the normal "day"

position.

►ꢀ Press the lug A to release the head restraint

Rear head restraints

and push it down.

Adjustment

►ꢀ Set the mirror to the normal “day” position.

Never drive with passengers seated at the

rear when the head restraints are

removed; the head restraints should be in

place and in the high position.

Automatic "electrochrome" model

The head restraint for the centre seat

and those for the outer seats are not

interchangeable.

Backrest angle

This system automatically and progressively

transitions between day and night modes, using a

sensor that measures the light entering from the

rear of the vehicle.

They have two positions:

– A high position, for when the seat is in use:

►ꢀ Pull the head restraint fully up.

– A low position, for stowing, when the seat is

not in use:

►ꢀ Press the lug A to release the head restraint

and push it down.

To ensure optimum visibility during your

manoeuvres, the mirror lightens

automatically when reverse gear is engaged.

The rear head restraints can be removed.

Removing a head restraint

Rear seats

Bench seat with fixed cushions and split folding

and reclining backrests (2/3-1/3).

►ꢀ Pull the head restraint fully up.

►ꢀ Press the lug A to release the head restraint

and remove it completely.

►ꢀ To bring the backrest 3 up or down, press

control 2 or pull it to the desired position.

Refitting a head restraint

When you adjust the backrest and the

boot is loaded, check that nothing can

hinder the backrest from moving.

Risk of damaging the backrest.

►ꢀ Insert the head restraint rods into the guides

in the corresponding seat backrest.

►ꢀ Push the head restraint down as far as it will

go.

Ease of use and comfort -> Mirrors for Your DS 7 Crossback 4 Door First Generation (2017-2022)

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals