46
03
Ease of use and comfort
►ꢀ Press button 1 or 2 to recall the corresponding
position.
Heated seats with DS CONNECT RADIO
Heated and ventilated seats with DS CONNECT
NAV
An audible signal sounds when the adjustment is
finished.
You can interrupt the current movement by
pressing button M, 1 or 2 or by using one of the
seat adjustment controls.
A stored position cannot be recalled while driving.
Recalling stored positions is deactivated 45
seconds after switching off the ignition.
The control buttons are displayed permanently in
the side banners of the touch screen.
►ꢀ Press one of these buttons to
display the heating and ventilation
settings page for the front seats.
In the settings page:
►ꢀ Press this button to activate the
heating function of the corresponding
seat.
►ꢀ Press this button to activate the
ventilation function of the corresponding
seat.
►ꢀ Each press of a button changes the level of
heating or ventilation; the corresponding number
of indicator lamps come on (low / medium / high).
►ꢀ To deactivate, press the button again until all
the indicator lamps are off.
The control knob is located in the central storage
compartment.
►ꢀ Turn the knob to switch on and select the
adjustment level:
• 0 = off.
• 1 = low.
• 2 = medium.
• 3 = high.
Welcome function
The welcome function assists entering and
leaving the vehicle.
After switching off the ignition and opening the
driver’s door, the seat moves back automatically
and then stays in this position, ready for the next
entry into the vehicle.
When switching on the ignition, the front seat
moves forward to the stored driving position.
When the seat is moving, take care that no person
or object hinders the automatic movement of the
seat.
Heated seats with DS CONNECT NAV
The state of the system stays in the memory when
the ignition is switched off.
The control buttons are displayed in the side
banners of the touch screen.
Do not use the function when the seat is
not occupied.
Reduce the heating intensity as soon as
possible.
When the seat and passenger compartment
have reached a satisfactory temperature,
switch the function off; reducing electricity
consumption in turn decreases fuel
consumption.
►ꢀ Press the button corresponding to your
seat.
►ꢀ Each press changes the level of heating; the
corresponding number of indicator lamps come on
(low / medium / high).
►ꢀ Press the button again until all the indicator
lamps are off.
The state of the system stays in the memory when
the ignition is switched off.
Heated seats
The function is active only with the engine
running.
The type and location of the controls depend on
the vehicle configuration.
English 
