Ease of use and comfort -> Sitting comfortably for Your DS 7 Crossback 4 Door First Generation (2017-2022)

42  
03  
Ease of use and comfort  
Adjust the longitudinal position of the seat so that Passenger’s side  
you can fully depress the pedals with legs slightly  
flexed.  
The distance between your knees and the  
dashboard should be at least 10 cm, for easy  
access to the dashboard controls.  
Driving position  
Adopting a good driving position helps improve  
your comfort and protection.  
It also optimises interior and exterior visibility as  
well as access to controls.  
Adjust the backrest angle to as vertical a position  
as possible; never tilt it more than 25°.  
Adjust the head restraint so that its upper edge is  
level with the top of your head.  
Adjust the length of the seat cushion to support  
your thighs.  
Sitting comfortably  
Whether or not your vehicle has certain seat  
adjustments described in this section depends on  
the trim level and country of sale.  
Driver’s side  
Sit fully back in the seat with your pelvis, back  
Adjust the lumbar support so that it conforms to  
the shape of your spine.  
and shoulders in contact with the seat backrest.  
Adjust the longitudinal position of the seat so that  
you are at a distance of at least 25 cm from the  
dashboard.  
Adjust the head restraint so that its upper edge is  
level with the top of your head.  
Adjust the steering wheel so that it is at least 25  
cm from your sternum and you can hold it with  
your arms slightly bent.  
The steering wheel should not hide the instrument  
panel.  
As a safety precaution, adjust the seats  
only when the vehicle is stationary.  
Before moving off  
Adjust the interior and exterior door mirrors to  
reduce blind spots.  
If your vehicle has electric seats, the  
ignition must be on to adjust them.  
Fasten your seat belt: place the diagonal belt in  
the middle of your shoulder and adjust the lap belt  
so that it is tightened across your pelvis.  
Ensure that all passengers have fastened their  
seat belts correctly.  
Sit fully back in the seat with your pelvis, back  
and shoulders in contact with the seat backrest.  
Adjust the seat cushion height so that your eyes  
are level with the centre of the windscreen.  
The head room (from the roof) should be at least  
10 cm.  
If your vehicle has electric door mirrors,  
the ignition must be on to adjust them.  
43  
03  
Ease of use and comfort  
The adjustment is correct when the upper  
edge of the head restraint is level with the  
top of the head.  
When driving  
Front seats  
Maintain a good driving position and hold the  
steering wheel with both hands at the 'quarter to  
three' position, so that you can easily and quickly  
reach the controls behind and near the steering  
wheel.  
Before moving the seat backwards,  
ensure that there is no person or object  
that might prevent the full travel of the seat.  
There is a risk of trapping or pinching  
passengers if present in the rear seats or of  
jamming the seat if large objects are placed on  
the floor behind the seat.  
Adjusting the angle  
(Depending on equipment)  
Forwards:  
►ꢀ move the lower part of the head restraint  
forwards.  
Never adjust the seats or steering wheel  
when driving.  
Always keep your feet on the floor.  
Rearwards:  
►ꢀ press and hold button B and push the lower  
part of the head restraint rearwards.  
Manually-adjusted seats  
Front head restraints  
Forwards-backwards  
Removing a head restraint  
►ꢀ Pull the head restraint fully up.  
►ꢀ Depending on equipment, press lug A or C to  
release the head restraint and raise it fully.  
►ꢀ Stow the head restraint securely.  
Refitting a head restraint  
►ꢀ Insert the head restraint rods into the guides  
in the corresponding seat backrest.  
►ꢀ Push the head restraint down as far as it will  
go.  
►ꢀ If the vehicle is so equipped, press lug Aor C to  
release the head restraint and push it down.  
►ꢀ Adjust the height of the head restraint.  
Height adjustment  
►ꢀ Upward: pull the head restraint up to the  
desired position; the head restraint can be felt to  
click into position.  
►ꢀ Raise the control bar and slide the seat  
forwards or backwards.  
►ꢀ Release the bar to lock the seat in position on  
one of the notches.  
►ꢀ Downward: depending on equipment, press  
lugA or button B and then, while still pressing,  
lower the head restraint.  
Never drive with the head restraints  
removed; they should be in place and  
adjusted for the occupant of the seat.