103
Driving
06
The information appears on the instrument
panel, in the form of an arrow and the
To deactivate/reactivate the function:
Malfunction
If the event of a malfunction, these
recommended gear.
warning lamps light up on the
instrument panel, accompanied by the display of
a message.
The system adapts the gear change
instructions according to the driving
conditions (e.g. slope, load) and driving style
(e.g. power demand, acceleration, braking).
The system never suggests:
Have it checked by a dealer or a qualified
workshop.
– engaging first gear;
Gear shift indicator
– engaging reverse gear.
►ꢀ Press the button.
A message on the instrument panel confirms the
change of status.
(Depending on engine)
This system is designed to reduce fuel
consumption by recommending the most suitable
gear.
Stop & Start
When the function is deactivated, the orange
indicator lamp is lit; if the engine was in standby,
it restarts immediately.
The Stop & Start function puts the engine
temporarily into standby - STOP mode - during
phases when the vehicle is stationary (e.g. red
lights, traffic jams). The engine automatically
restarts - START mode - as soon as the driver
indicates the intention of moving off again.
Primarily designed for urban use, the function
is intended to reduce fuel consumption and
exhaust emissions as well as the noise level when
stationary.
Operation
Depending on the driving situation and the
vehicle's equipment, the system may recommend
skipping one or more gears.
Associated indicator lamps
Function activated.
Function deactivated or malfunction.
Gear engagement recommendations are not to be
considered mandatory. Indeed, the configuration
of the road, the traffic density and safety remain
determining factors when choosing the best
gear. Therefore, the driver remains responsible
for deciding whether or not to follow the system’s
advice.
Opening the bonnet
Before doing anything under the bonnet,
deactivate the Stop & Start system to avoid
any risk of injury caused by the engine
restarting automatically.
The function does not affect the functionalities of
the vehicle, in particular the braking.
The system cannot be deactivated.
Deactivation/Reactivation
The system is only active in mode M of the
The function is activated by default when the
automatic gearbox.
ignition is switched on.
English 
