112
Driving
06
On a steep descent or in the event of
between vehicles, the driver remains
responsible for their driving.
– In heavy traffic (except versions with the
Stop & Go function).
sharp acceleration, the speed limiter will
not be able to prevent the vehicle from
exceeding the speed setting.
In the interest of public safety, only use cruise
control if the traffic conditions enable vehicles
to drive at a steady speed and maintain an
adequate safety distance.
– On winding or steep roads.
– On slippery or flooded roads.
– In poor weather conditions.
– In the event of restricted visibility for the
driver.
If necessary, apply the brakes to control your
vehicle’s speed.
Remain vigilant while cruise control is
activated. If you press and hold one of the
speed setting modification buttons, your
vehicle may change speed very abruptly.
When descending a steep hill, the cruise
control system cannot prevent the vehicle from
exceeding the set speed. Brake if necessary to
control the vehicle speed.
When the vehicle speed returns to the speed
setting level, the speed limiter operates again: the
speed setting display becomes fixed again.
– Driving on a speed circuit.
– Driving on a rolling road.
– When using a ‘space-saver’ type spare
wheel.
Switching off
►ꢀ Turn the thumbwheel 1 to the "OFF" position:
– When using snow chains, non-slip covers or
studded tyres.
speed limiter information is no longer displayed.
On steep climbs or when towing, the set speed
may not be reached or maintained.
Malfunction
Programmable cruise
control
Exceeding the programmed speed setting
You can temporarily exceed the speed
setting by pressing the accelerator pedal (the
programmed speed flashes).
In the event of a malfunction, dashes are
displayed flashing and then fixed instead of the
speed setting.
For more information, refer to the General
recommendations on the use of driving
and manoeuvring aids and the Cruise control
- particular recommendations.
To return to the speed setting, release the
accelerator pedal (when the set speed is
reached again, the displayed speed stops
flashing).
Have it checked by a dealer or a qualified
workshop.
This system automatically maintains the
vehicle’s speed at the value programmed
by the driver (speed setting), without the use of
the accelerator pedal.
Cruise control - Specific
recommendations
Operating limits
Cruise control is switched on manually.
It requires a minimum vehicle speed of 25 mph
(40 km/h).
Never use the system in the following
situations:
The cruise control function does not
guarantee compliance with the maximum
authorised speed and the safety distance
– In an urban area with the risk of pedestrians
crossing the road.
With an automatic gearbox, mode D or second
gear or higher in mode M must be engaged.
English 
