2009-2015 Honda Jazz 4 Door Instruments and Controls User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and Controls for Your Honda Jazz 4 Door Second Generation (2009-2015)

07/09/12 09:21:30 32SAA650_086  
Instruments and Controls  
This section gives information about  
the controls and displays that  
contribute to the daily operation of  
your vehicle. All the essential  
controls are within easy reach.  
Turn Signals ............................... 103  
Windscreen Wipers................... 104  
Windscreen Washers................ 105  
Rear Window Wiper and  
Head Restraints ......................... 125  
Folding the Rear Seats.............. 127  
Create the Luggage Space ....... 128  
Detachable Anchor.................... 131  
Washer.................................... 105 Tonneau Cover............................... 132  
Hazard Warning......................... 106 Power Windows ............................. 134  
Rear Window Demister ............ 106 Sunroof............................................ 136  
Rear Fog Light........................... 107 Mirrors............................................ 137  
Front Fog Light ......................... 107  
Front and Rear Fog Lights....... 108  
Headlight Adjuster .................... 109  
Adjusting the Power Mirrors... 138  
Heated Door Mirrors ................ 138  
Folding Door Mirrors ............... 139  
Control Locations ............................ 84  
Indicator Lights................................ 86  
Gauges .............................................. 96 Keys and Locks.............................. 110 Vanity Mirror ................................. 140  
Steering Wheel Adjustment..... 109 Sun Visor......................................... 139  
Speedometer ................................ 96  
Tachometer.................................. 96  
Odometer...................................... 97  
Trip Meter .................................... 97  
Segment Distance and  
Keys............................................. 110 Parking Brake ................................ 140  
Immobilizer System................... 112 Coat Hook....................................... 141  
Ignition Switch ........................... 113 Beverage Holder............................ 141  
Door Locks................................. 114 Cigarette Lighter........................... 142  
Power Door Locks..................... 115 Ashtray............................................ 142  
Remote Transmitter.................. 117 Accessory Power Socket .............. 143  
Childproof Door Locks ............. 121 Luggage Hooks.............................. 144  
Tailgate ....................................... 121 Interior Lights................................ 144  
Fuel Mileage ............................ 97  
Outside Temperature  
Indicator.....................................98  
Fuel Gauge ................................... 99  
Controls Near the Steering  
Wheel...................................... 100  
Headlights .................................. 102  
Instrument Panel Brightness... 103  
Glove Box ................................... 123  
Seats ................................................ 124  
Front Seat Adjustments............ 124  
Driver’s Seat Height  
Spotlights.................................... 144  
Individual Map Lights............... 144  
Ceiling Light............................... 145  
Luggage Area Light .................. 145  
Adjustment ............................. 125  
83  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:21:36 32SAA650_087  
Control Locations  
Left-hand drive type  
INDICATOR LIGHTS (P.86)  
GAUGES(P.96)  
HEATING/COOLING CONTROLS*  
REMOTE  
AUDIO  
(P.148)  
CLIMATE CONTROL SYSTEM*  
(P.157)  
CONTROLS*  
(P.226)  
MASTER  
DOOR LOCK  
BUTTON*  
(P.115)  
AUDIO SYSTEM*  
(P.167)  
POWER WINDOW  
SWITCHES*  
(P.134)  
BONNET RELEASE  
HANDLE  
(P.233)  
PARKING BRAKE  
(P.140)  
MANUAL TRANSMISSION (P.248)  
AUTOMATIC TRANSMISSION (CVT)  
: For some types  
(P.251)  
A/T model is shown.  
84  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:21:42 32SAA650_088  
Control Locations  
Right-hand drive type  
HEATING/COOLING CONTROLS*  
CLIMATE CONTROL SYSTEM*  
INDICATOR LIGHTS(P.86)  
(P.96)  
(P.148)  
GAUGES  
(P.157)  
REMOTE AUDIO  
CONTROLS*  
(P.226)  
MASTER DOOR LOCK  
BUTTON*  
(P.115)  
AUDIO SYSTEM*  
(P.167)  
POWER WINDOW  
SWITCHES*  
(P.134)  
BONNET RELEASE  
HANDLE  
(P.233)  
PARKING BRAKE  
(P.140)  
MANUAL TRANSMISSION (P.248)  
AUTOMATIC TRANSMISSION (CVT)(P.251)  
: For some types  
A/T model is shown.  
85  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:21:49 32SAA650_089  
Indicator Lights  
Honda CVT 7 Speed Mode model  
PARKING BRAKE AND BRAKE  
(P.95)  
HIGH BEAM INDICATOR  
(P.94)  
SYSTEM INDICATOR  
LOW FUEL INDICATOR  
ANTI-LOCK BRAKE SYSTEM (ABS)  
(P.94)  
DOOR/TAILGATE  
OPEN INDICATOR  
(P.94)  
(P.93)  
INDICATOR  
MALFUNCTION INDICATOR LAMP  
(P.92, 370)  
HIGH TEMPERATURE INDICATOR  
(P.95)  
ELECTRIC POWER STEERING  
(P.94)  
(EPS) INDICATOR  
CHARGING SYSTEM  
INDICATOR  
(P.92, 369)  
LOW OIL PRESSURE  
INDICATOR  
(P.92, 368)  
FRONT FOG  
LIGHTS ON  
INDICATOR  
(P.93)  
LOW TEMPERATURE  
INDICATOR  
(P.95)  
LIGHT  
INDICATOR  
(P.94)  
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)  
IMMOBILIZER SYSTEM INDICATOR  
(P.92)  
(P.91)  
INDICATOR  
SEAT BELT REMINDER INDICATOR  
(P.91)  
REAR FOG LIGHT INDICATOR  
(P.94)  
86  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:21:56 32SAA650_090  
Indicator Lights  
Automatic transmission (CVT) model  
PARKING BRAKE AND BRAKE  
(P.95)  
SYSTEM INDICATOR  
(P.94)  
LOW FUEL INDICATOR  
HIGH BEAM INDICATOR DOOR/TAILGATE  
(P.94)  
OPEN INDICATOR  
(P.94)  
ANTI-LOCK BRAKE SYSTEM (ABS)  
INDICATOR (P.93)  
HIGH TEMPERATURE INDICATOR  
(P.95)  
MALFUNCTION INDICATOR LAMP  
(P.92, 370)  
ELECTRIC POWER STEERING  
(EPS) INDICATOR  
(P.94)  
CHARGING SYSTEM  
INDICATOR  
(P.92, 369)  
LOW TEMPERATURE  
INDICATOR  
FRONT FOG LIGHT LIGHTS ON  
(P.95)  
INDICATOR  
(P.94)  
INDICATOR  
(P.93)  
LOW OIL PRESSURE INDICATOR  
(P.92, 368)  
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)  
(P.91)  
INDICATOR  
IMMOBILIZER SYSTEM INDICATOR  
(P.92)  
REAR FOG LIGHT  
(P.94)  
SEAT BELT REMINDER INDICATOR  
(P.91)  
INDICATOR  
87  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:22:03 32SAA650_091  
Indicator Lights  
Automatic transmission (CVT) model  
LOW TEMPERATURE INDICATOR  
(P.95)  
SUPPLEMENTAL RESTRAINT SYSTEM (SRS) INDICATOR  
(P.91)  
IMMOBILIZER SYSTEM INDICATOR  
(P.92)  
ANTI-LOCK BRAKE SYSTEM (ABS)  
INDICATOR  
(P.93)  
HIGH TEMPERATURE INDICATOR  
(P.95)  
ELECTRIC POWER STEERING  
(EPS) INDICATOR  
(P.94)  
REAR FOG LIGHT INDICATOR  
(P.94)  
MALFUNCTION  
INDICATOR LAMP  
(P.92, 370)  
DOOR/TAILGATE  
OPEN INDICATOR  
(P.94)  
SEAT BELT REMINDER  
INDICATOR  
(P.91)  
HIGH BEAM  
INDICATOR  
(P.94)  
CHARGING SYSTEM  
INDICATOR  
(P.92, 369)  
LOW FUEL INDICATOR  
(P.94)  
LOW OIL PRESSURE INDICATOR  
(P.92, 368)  
PARKING BRAKE AND BRAKE SYSTEM INDICATOR  
(P.95)  
FRONT FOG LIGHT INDICATOR  
(P.94)  
88  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:22:11 32SAA650_092  
Indicator Lights  
Manual transmission model  
VEHICLE STABILITY ASSIST (VSA) SYSTEM  
(P.93)  
INDICATOR  
DOOR/TAILGATE OPEN INDICATOR PARKING BRAKE AND BRAKE LOW FUEL INDICATOR (P.94)  
(P.95)  
SYSTEM INDICATOR  
(P.94)  
ANTI-LOCK BRAKE SYSTEM (ABS)  
(P.93)  
INDICATOR  
(P.94)  
HIGH BEAM INDICATOR  
HIGH TEMPERATURE  
INDICATOR  
(P.95)  
VSA ACTIVATION INDICATOR  
(P.93)  
MALFUNCTION INDICATOR  
ELECTRIC POWER  
(P.92, 370)  
LAMP  
STEERING (EPS)  
INDICATOR  
(P.94)  
CHARGING SYSTEM  
INDICATOR  
(P.92, 369)  
LOW OIL PRESSURE  
INDICATOR  
(P.92, 368)  
LIGHTS ON  
INDICATOR  
(P.93)  
FRONT FOG LIGHT  
INDICATOR  
(P.94)  
LOW TEMPERATURE  
INDICATOR  
(P.95)  
IMMOBILIZER SYSTEM INDICATOR  
(P.92)  
REAR FOG LIGHT  
INDICATOR  
(P.94)  
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)  
INDICATOR  
(P.91)  
SEAT BELT REMINDER INDICATOR  
(P.91)  
89  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:22:18 32SAA650_093  
Indicator Lights  
Manual transmission model  
LOW TEMPERATURE INDICATOR  
(P.95)  
SUPPLEMENTAL RESTRAINT SYSTEM (SRS) INDICATOR  
(P.91)  
IMMOBILIZER SYSTEM INDICATOR  
(P.92)  
ANTI-LOCK BRAKE SYSTEM (ABS)  
INDICATOR  
(P.93)  
HIGH TEMPERATURE INDICATOR  
(P.95)  
ELECTRIC POWER STEERING  
(EPS) INDICATOR  
(P.94)  
REAR FOG LIGHT INDICATOR  
(P.94)  
MALFUNCTION  
INDICATOR LAMP  
(P.92, 370)  
DOOR/TAILGATE  
OPEN INDICATOR  
(P.94)  
SEAT BELT REMINDER  
INDICATOR  
(P.91)  
HIGH BEAM  
INDICATOR  
(P.94)  
CHARGING SYSTEM  
INDICATOR  
(P.92, 369)  
LOW FUEL INDICATOR  
(P.94)  
LOW OIL PRESSURE INDICATOR  
(P.92, 368)  
PARKING BRAKE AND BRAKE SYSTEM INDICATOR  
(P.95)  
FRONT FOG LIGHT INDICATOR  
(P.94)  
90  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:22:27 32SAA650_094  
Indicator Lights  
The instrument panel has many  
indicators to give you important  
information about your vehicle.  
(Except EU models)  
Supplemental Restraint  
System (SRS) Indicator  
This indicator comes on when you  
turn the ignition switch to the ON  
(II) position. It is a reminder to you  
and your passengers to protect  
yourselves by fastening the seat  
belts. The indicator stays on until  
you fasten seat belt. The indicator  
stays off if you fasten your seat belt  
before turning on the ignition. A  
beeper also sounds if you have not  
fastened your seat belt.  
This indicator comes on when you  
turn the ignition switch to the ON  
(II) position. If it comes on at any  
other time, it indicates a potential  
problem with your front airbags or  
automatic seat belt tensioners. On  
models equipped with side airbags,  
this indicator will also alert you to a  
potential problem with your side  
airbags. For more information, see  
page 76 .  
Seat Belt Reminder  
Indicator  
(EU models)  
The seat belt system includes an  
indicator on the instrument panel  
and a beeper to remind you and your  
passengers to fasten your seat belts.  
If you turn the ignition switch to the  
ON (II) position before fastening  
your seat belt, the beeper sounds  
and the indicator flashes. If you do  
not fasten your seat belt before the  
beeper stops, the indicator stops  
flashing but remains on.  
If you do not fasten your seat belt,  
the beeper will stop after a few  
seconds but the indicator stays on  
until you do. Both the indicator and  
the beeper stay off if you fasten your  
seat belt before turning on the  
ignition switch.  
If you continue driving without  
fastening your seat belt, the beeper  
sounds and the indicator flashes  
again at regular intervals.  
On some types, the seat belt system  
does not have a reminder beeper.  
Only the indicator comes on as  
described above.  
91  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:22:39 32SAA650_095  
Indicator Lights  
Malfunction Indicator  
Immobilizer System  
Indicator  
(For some types)  
Lamp  
See page 370.  
Turn Signal and Hazard Warning  
Indicators  
This indicator comes on for a few  
seconds when you turn the ignition  
switch to the ON (II) position. It will  
then go off if you have inserted a  
properly-coded ignition key. If it is  
not a properly-coded key, the  
indicator will blink and the engine  
will not start (see page 112 ).  
Low Oil Pressure  
The left or right turn signal indicator  
blinks when you signal a lane change  
or turn. If the indicator does not  
blink or blinks rapidly, it usually  
means one of the turn signal bulbs is  
burned out (see pages 328 and 329 ).  
Replace the bulb as soon as possible,  
since other drivers cannot see that  
you are signaling.  
Indicator  
The engine can be severely damaged  
if this indicator flashes or stays on  
when the engine is running. For  
more information, see page 368 .  
Charging System  
Indicator  
If this indicator comes on when the  
engine is running, the battery is not  
This indicator also blinks several  
times when you turn the ignition  
switch from the ON (II) to the  
When you press the Hazard Warning  
button, both turn signal indicators  
blink. All turn signals on the outside  
of the vehicle should flash.  
being charged. For more information, ACCESSORY (I) or the LOCK (0)  
see page 369 .  
position.  
Hazard Warning  
Indicator  
(For some types)  
This indicator blinks with both turn  
signal indicators when you turn on  
the Hazard Warning button.  
92  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:22:53 32SAA650_096  
Indicator Lights  
Vehicle Stability Assist  
VSA Activation Indicator  
(For some types)  
Lights On Indicator  
(VSA) System Indicator  
(For some types)  
(For some types)  
This indicator has three functions:  
This indicator reminds you that the  
exterior lights are on. It comes on  
when the light switch is in either the  
This indicator normally comes on for  
a few seconds when you turn the  
ignition switch to the ON (II)  
position.  
1. It comes on as a reminder that you  
have turned off the Vehicle  
Stability Assist (VSA) system.  
or  
position. If you turn the  
ignition switch to the ACCESSORY  
(I) or the LOCK (0) position without  
turning off the light switch, this  
indicator will remain on. A reminder  
beeper will also sound when you  
open the driver’s door.  
If this indicator comes on and stays  
on at any other time, or it does not  
come on when you turn the ignition  
switch to the ON (II) position, there  
is a problem with the VSA system.  
Take the vehicle to your dealer to  
have it checked. Without VSA, your  
2. It flashes when VSA is active (see  
page 264 ).  
3. It comes on along with the VSA  
system indicator if there is a  
problem with the VSA system.  
Anti-lock Brake System  
(ABS) Indicator  
(For some types)  
vehicle still has normal driving ability, This indicator normally comes on for  
This indicator normally comes on for  
a few seconds when you turn the  
ignition switch to the ON (II)  
position. If this indicator comes on at  
any other time, there is a problem in  
the ABS. If this happens, take the  
vehicle to your dealer to have it  
checked. With the indicator on, your  
vehicle still has normal braking  
ability but no anti-lock. For more  
information, see page 261 .  
but will not have VSA traction and  
stability enhancement. See page  
265 for more information on the  
VSA system.  
a few seconds when you turn the  
ignition switch to the ON (II)  
position. See page 265 for more  
information on the VSA system.  
93  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:23:06 32SAA650_097  
Indicator Lights  
Electric Power Steering  
Low Fuel Indicator  
Door and Tailgate Open  
Indicator  
(EPS) Indicator  
This indicator normally comes on  
when you turn the ignition switch to  
the ON (II) position and goes off  
after the engine starts. If it comes on  
at any other time, there is a problem  
in the Electric Power Steering  
system. If this happens, stop the  
vehicle in a safe place and turn off  
the engine. Reset the system by  
restarting the engine. The indicator  
If the indicator glows, it means you  
should refuel, because the tank  
contains less than:  
This indicator comes on if any door  
or the tailgate is not closed tightly.  
7.9 (2.09 US gal , 1.74 Imp gal)  
Front Fog Light  
Indicator  
(For some types)  
High Beam Indicator  
This indicator lights when you turn  
on the front fog lights. See page  
107 for information on operating the  
front fog lights.  
This indicator comes on with the  
high beam headlights. See page  
102 for information on the headlight  
will not be turned off immediately, so controls.  
you should drive several kilometers  
and watch the EPS indicator. If it  
For some types  
Rear Fog Light Indicator  
(For some types)  
This indicator lights when you turn  
on the rear fog light. See page  
107 for information on operating the  
rear fog light.  
See page 108 to operate the front  
does not go off, or comes back on  
and rear fog lights.  
again while driving, take the vehicle  
to your dealer to have it checked.  
With the indicator on, the EPS is  
turned off, making the vehicle  
harder to steer.  
For some types  
See page 108 to operate the front  
and rear fog lights.  
94  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:23:15 32SAA650_098  
Indicator Lights  
Parking Brake and  
High Temperature  
Indicator  
Low Temperature  
Brake System Indicator  
Indicator  
This indicator has two functions:  
This shows the temperature of the  
engine’s coolant. This indicator  
normally comes on when you turn  
the ignition switch to the ON (II)  
This shows the temperature of the  
engine’s coolant. There is no  
problem when this indicator comes  
on when the engine is cold. If it  
1. This indicator is a reminder to  
check the parking brake. On some  
types, it comes on when you turn  
the ignition switch to the ON (II)  
position. Driving with the parking  
brake not fully released can  
position and goes off after the engine comes on when the engine is warm  
starts. In normal driving conditions, (normal operating temperature),  
the indicator should not be turned on. have the vehicle inspected by your  
In severe driving conditions, such as  
very hot weather or a long period of  
uphill driving, the indicator will begin  
to blink. It may continue to blink as  
the temperature rises. If this occurs  
while you are driving, be sure to limit  
your speed to prevent further  
overheating. If the indicator remains  
on, then you must pull safely to the  
side of the road. See page 366 for  
instructions and precautions on  
checking the engine’s cooling  
system.  
dealer as soon as possible.  
damage the brakes and tyres.  
2. If the indicator remains lit after  
you have fully released the  
parking brake while the engine is  
running, or if it comes on while  
driving, it can indicate a problem  
in the brake system. For more  
information, see page 371 .  
Do not drive the vehicle while the  
indicator is on or the engine may be  
damaged.  
95  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:23:23 32SAA650_099  
Gauges  
On some types, the instrument panel  
illuminates when you open the  
driver’s door, and the gauges  
illuminate when you turn the ignition  
switch to the ON (II) position.  
SPEEDOMETER  
SELECT/RESET KNOB  
TACHOMETER  
Speedometer  
This shows your speed in kilometers  
per hour (km/h) and/or miles per  
hour (mph) depending on the type.  
ODOMETER/TRIP METER/SEGMENT DISTANCE AND FUEL MILEAGE/  
OUTSIDE TEMPERATURE INDICATOR  
(For some types)  
On some types, when the speed is  
over approximately 120 km/h  
(75 mph), a buzzer sounds.  
SPEEDOMETER  
TACHOMETER  
Tachometer  
The tachometer shows the engine  
speed in revolutions per minute  
(rpm). To protect the engine from  
damage, never drive with the  
tachometer needle in the red zone.  
ODOMETER/TRIP METER/  
SEGMENT DISTANCE AND FUEL MILEAGE  
SELECT/RESET KNOB  
96  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:23:33 32SAA650_100  
Gauges  
Odometer/Trip Meter/Segment  
Distance and Fuel Mileage/  
Outside Temperature  
Odometer  
Segment Distance and Fuel Mileage  
You can use this function to display  
the distance and average fuel  
The odometer shows the total  
distance of kilometers or miles your  
vehicle has been driven.  
The odometer, the trip meter, the  
segment distance and fuel mileage  
and outside temperature (on some  
types), use the same display.  
To switch between the segment  
display and the Trip Meter/  
Odometer display, press the Select/  
Reset Knob.  
mileage for a segment of a trip.  
Trip Meter  
To display the segment distance and  
fuel mileage, press and release the  
Select/Reset knob. The Segment  
Display will come on to remind you  
that this is the segment distance and  
fuel mileage display.  
The trip meter shows the distance of  
kilometers or miles driven since you  
last reset it.  
To reset a trip meter, display it and  
then press and hold the select/reset  
knob until the number resets to ‘‘0.0’’. For some types  
When you turn the ignition switch to  
the ON (II) position, what you last  
selected is displayed.  
Fuel Mileage Display (mpg,  
kilometers per liter, and in liters per  
100 km) depends on models.  
The segment distance and fuel  
mileage will be automatically reset  
when resetting the trip meter. The  
display will reset if the vehicle’s bat-  
tery goes dead or is disconnected.  
97  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:23:41 32SAA650_101  
Gauges  
Outside Temperature Indicator  
(For some types)  
This indicator displays the outside  
temperature in Centigrade.  
If the outside temperature is  
When it reaches the desired value,  
release the Select/Reset knob. You  
should see the new outside  
incorrectly displayed, you can adjust  
it up to ±3°C warmer or cooler.  
temperature displayed.  
NOTE: The temperature must be  
stabilized before doing this  
procedure.  
The temperature sensor is located in  
the front bumper. Therefore, the  
temperature reading can be affected  
by heat reflection from the road sur-  
face, engine heat, and the exhaust  
from surrounding traffic. This can  
cause an incorrect temperature read-  
ing when your speed is under  
In certain weather conditions,  
temperature readings near freezing  
0°C could mean that ice is forming  
on the road surface.  
Press the Select/Reset knob for 10  
seconds. The following sequence will  
appear for one second each: 0, 1, 2, 3,  
3, 2, 1, 0.  
30 km/h (19 mph).  
When you start your trip, the sensor  
is not fully acclimatized, therefore it  
may take several minutes until the  
proper temperature is displayed.  
98  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:23:48 32SAA650_102  
Gauges  
Fuel Gauge  
FUEL GAUGE  
This shows how much fuel you have.  
It is most accurate when the vehicle  
is on level ground. It may show  
slightly more or less than the actual  
amount when you are driving on  
curvy or hilly roads.  
The needle returns to the bottom  
after you turn off the ignition switch.  
The gauge shows the fuel level  
reading immediately after you turn  
the ignition switch back to the ON  
(II) position.  
(For some types)  
Avoid driving with an extremely low  
fuel level. Running out of fuel could  
cause the engine to misfire,  
damaging the catalytic converter.  
FUEL GAUGE  
99  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:23:56 32SAA650_103  
Controls Near the Steering Wheel  
Left-hand drive type  
HORN PAD1  
HAZARD WARNING BUTTON REAR WINDOW DEMISTER  
INSTRUMENT PANEL  
BRIGHTNESS2  
(P.103)  
(P.106)  
(P.106)  
HEATED DOOR MIRRORS2  
(P.138)  
VEHICLE STABILITY ASSIST  
(VSA) OFF SWITCH2  
(P.265)  
FOG LIGHTS2  
(P.107/108)  
HEADLIGHTS/  
TURN SIGNALS  
(P.102/103)  
MIRROR CONTROLS2  
(P.138)  
WINDSCREEN WIPERS/WASHERS  
(P.104/105)  
AUXILIARY INPUT JACK2  
(P.227)  
HEADLIGHT ADJUSTER2  
(P.109)  
STEERING SHIFT  
(P.256)  
SWITCHES2  
STEERING WHEEL  
ADJUSTMENT  
(P.110)  
7 SPEED MODE MAIN SWITCH2  
(P.255)  
1: To use the horn, press the centre pad of the steering wheel.  
2: For some types  
100  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:24:04 32SAA650_104  
Controls Near the Steering Wheel  
Right-hand drive type  
HAZARD WARNING BUTTON  
(P.106)  
HORN PAD1  
INSTRUMENT PANEL BRIGHTNESS2  
(P.103)  
VEHICLE STABILITY ASSIST  
(VSA) OFF SWITCH2  
(P.265)  
WINDSCREEN WIPERS/  
WASHERS3  
(P.104/105)  
FOG LIGHTS2,3  
(P.107/108)  
HEADLIGHTS/TURN  
SIGNALS3 (P.102/103)  
READ WINDOW  
DEMISTER  
(P.106)  
HEATED DOOR  
MIRRORS  
(P.138)  
MIRROR CONTROLS2  
(P.138)  
STEERING SHIFT  
AUXILIARY INPUT  
SWITCHES2 (P.256)  
JACK2  
(P.227)  
STEERING WHEEL  
ADJUSTMENT  
7 SPEED MODE MAIN SWITCH2  
(P.255)  
HEADLIGHT ADJUSTER2  
(P.109)  
(P.110)  
1: To use the horn, press the centre pad of the steering wheel.  
2: For some types  
3: On European models, these switches change locations with each other.  
101  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:24:11 32SAA650_105  
Controls Near the Steering Wheel  
Headlights  
If you leave the lights on with the  
key removed from the ignition  
switch, you will hear a reminder  
beeper when you open the driver’s  
door.  
For some types  
When the light switch is in either of  
these positions, the Lights On  
indicator comes on as a reminder  
(see page 93 ).  
The rotating switch on the lever  
controls the lights. Turning this  
To change from low beams to high  
beams, push the turn signal lever  
forward until you hear a click. The  
high beam indicator will come on  
(see page 94 ). To return to low  
beams, pull the turn signal lever  
back.  
switch to the ‘‘  
’’ position turns  
on the position lights, tail-lights,  
instrument panel lights, and rear  
licence plate lights. Turning the  
switch to the ‘‘  
on the headlights.  
’’ position turns  
102  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:24:19 32SAA650_106  
Controls Near the Steering Wheel  
Instrument Panel Brightness  
(For some types)  
Turn Signals  
TURN SIGNAL LEVER  
To flash the high beams, pull the  
turn signal lever back lightly, then  
release it. The high beams will come  
on and go off.  
Signal a turn or lane change with this  
lever. Push down or up on the lever  
to signal a turn. If you push it up or  
down all the way, the turn signal  
continues to blink even when you  
release the lever. It shuts off auto-  
matically as you complete the turn.  
The select/reset knob on the  
instrument panel controls the  
brightness of the instrument panel  
lights. Turn the knob to adjust the  
brightness.  
The high beams will stay on for as  
long as you hold the lever back, no  
matter what position the headlight  
switch is in.  
CONTINUED  
103  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:24:27 32SAA650_107  
Controls Near the Steering Wheel  
To signal a lane change, push lightly  
on the turn signal lever in the proper  
direction and hold it. The lever will  
return to the centre position as soon  
as you release it.  
Windscreen Wipers  
This lever controls the windscreen  
wipers and washers. It has five  
positions;  
In intermittent, the wipers operate  
every few seconds. In low speed and  
high speed, the wipers run continu-  
ously.  
MIST: mist mode  
OFF: off  
INT: intermittent  
LO: low speed  
HI: high speed  
To operate the wipers in mist mode,  
push the control lever up from the  
OFF position. The wipers run at high  
speed until you release the lever.  
This gives you a quick way to clear  
the windscreen.  
To select a position, push the lever  
up or down.  
104  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:24:35 32SAA650_108  
Controls Near the Steering Wheel  
Windscreen Washers  
Rear Window Wiper and Washer  
Turn and hold the switch one  
position up from ‘‘ON’’ to  
to  
activate the washer and wiper; or  
turn and hold the switch one position  
down from ‘‘OFF’’ to activate the  
washer only.  
The rear window washer uses the  
same fluid reservoir as the wind-  
screen washer.  
To clean the windscreen, pull back  
on the wiper control lever. The  
washers spray until you release the  
lever.  
Also, the lever controls the rear  
window wiper and washer. The  
rotary switch next to the windscreen  
wiper and washer switch is for the  
rear window wiper and washer. Turn  
to ‘‘ON’’ to activate the rear window  
wiper.  
On some types, the wipers run at low  
speed while you’re pulling the lever,  
then complete one more sweep of  
the windscreen after you release it.  
On some types, the rear window  
wiper operates every seven seconds.  
105  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:24:43 32SAA650_109  
Controls Near the Steering Wheel  
Hazard Warning  
Rear Window Demister  
The demister wires on the inside of  
the rear window can be accidentally  
damaged. When cleaning the glass,  
always wipe side-to-side.  
If you use the demister without the  
engine running, the battery may run  
out very quickly.  
For some types  
When the demister is on, the mirror  
demister (see page 138 ) is on, too.  
Push the red button to turn on the  
hazard warning lights (four-way  
flashers). This causes all outside  
turn signals and indicators in the  
instrument panel to flash. Use these  
lights to give a warning to other road  
users that your vehicle is causing a  
hazard.  
The rear window demister will clear  
fog, frost, and thin ice from the  
window. Push the demister button to  
turn it on and off. The indicator in  
the button comes on to show the  
demister is on.  
Make sure the rear window is clear  
and you have good visibility before  
starting to drive.  
106  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:24:53 32SAA650_110  
Controls Near the Steering Wheel  
Rear Fog Light  
(For some types)  
To operate the rear fog light, turn  
the switch up from the off (OFF)  
Front Fog Light  
(For some types)  
position. The  
indicator in the  
instrument panel comes on to  
indicate that the rear fog light is on.  
The rear fog light will go off when  
you turn the headlights off. To turn  
it on again, you have to click the  
rotary switch again with the  
headlights on.  
The headlights will stay on when you  
turn the rear fog light off. In this  
case, make sure the headlights are  
off when you don’t drive.  
REAR FOG LIGHT SWITCH  
FRONT FOG LIGHT SWITCH  
The rear fog light switch is located  
next to the light control switch. You  
can use the rear fog light when the  
headlights are on (the light control  
The front fog light switch is located  
next to the light control switch. You  
can use the front fog lights when the  
light control switch is in the  
position.  
or  
switch is in the  
position).  
To operate the front fog lights, turn  
the switch up from the OFF position.  
The  
indicator in the instrument  
panel comes on to indicate that the  
front fog lights are on.  
107  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:25:04 32SAA650_111  
Controls Near the Steering Wheel  
Front and Rear Fog Lights  
(For some types)  
To turn on the rear fog light only,  
turn the switch down from the off  
) position. The indicator in  
the instrument panel comes on to  
indicate that the rear fog light is on.  
You can turn off the rear fog light  
with the headlights on by turning the  
switch down again.  
The rear fog light will go off when  
you turn the headlights off. The  
front fog lights go off when the light  
control switch is turned to the OFF  
position.  
(
When you turn the light control  
switch on again, the front fog lights  
will also turn on. To turn the fog  
lights completely off, turn the fog  
To operate the front fog lights, turn  
the switch up from the off (  
)
light switch down to the off (  
position.  
)
position to the  
position. The  
indicator comes on as a  
reminder. To turn the rear fog light  
on with the front fog lights, turn the  
switch one position up from the  
position.  
To turn the rear fog light on again,  
you have to turn the fog light switch  
again with the headlights on  
The fog light switch is located next  
to the light control switch. You can  
control the front and rear fog lights  
with this switch when the light  
(
position).  
You can turn off the rear fog light  
with the front fog lights on by  
turning the switch up again.  
control switch is in the  
position.  
or  
You can also use the rear fog light  
when the light control switch is in  
the  
position or the front fog  
lights are turned on.  
108  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:25:13 32SAA650_112  
Controls Near the Steering Wheel  
Headlight Adjuster  
(For some types)  
0: A driver or a driver and passenger  
Steering Wheel Adjustment  
See page 20 for important safety  
information about how to properly  
position the steering wheel.  
in the front seat.  
1: Five persons in the front and rear  
seats.  
HEADLIGHT ADJUSTER KNOB  
2: Five persons in the front and rear  
seats and luggage in the luggage  
area, within the limits of maximum  
permissible vehicle weight.  
3: A driver and luggage in the  
luggage area, within the limits of  
maximum permissible axle weight  
and maximum permissible vehicle  
weight.  
Make any steering wheel adjustment  
before you start driving.  
Adjusting the steering wheel  
position while driving may  
cause you to lose control of  
the vehicle and be seriously  
injured in a crash.  
The vertical angle of the headlights  
(low beam) can be adjusted accord-  
ing to the number of persons and the  
loading weight in the luggage area.  
Adjust the steering wheel  
only when the vehicle is  
stopped.  
Move the adjusting knob to select an  
appropriate angle of the headlights.  
CONTINUED  
109  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:25:21 32SAA650_113  
Controls Near the Steering Wheel, Keys and Locks  
3. Push the lever up to lock the  
steering wheel in that position.  
Keys  
Two ignition keys come with your  
vehicle. You should keep one of  
them in a safe place, away from the  
vehicle, as a spare.  
4. Make sure you have securely  
locked the steering wheel in place  
by trying to move it up and down.  
They fit all the locks on your vehicle:  
• Ignition  
• Door(s)  
• Tailgate (for some types)  
LEVER  
To adjust the steering wheel upward  
or downward:  
1. Push the lever under the steering  
column all the way down.  
2. Move the steering wheel to the  
desired position, making sure the  
wheel points toward your chest,  
not toward your face. Make sure  
you can see the instrument panel  
gauges and the indicators.  
110  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:25:30 32SAA650_114  
Keys and Locks  
(On vehicles with immobilizer  
IGNITION KEYS  
WITH REMOTE  
TRANSMITTER  
KEY NUMBER  
TAG  
KEY NUMBER IGNITION KEYS  
TAG  
system)  
These keys contain electronic  
circuits that are activated by the  
Immobilizer System. They will not  
work to start the engine if the  
circuits are damaged.  
Protect the keys from direct  
sunlight, high temperature, and  
high humidity.  
Do not drop the keys or set heavy  
objects on them.  
You should have received a key  
number tag with your keys. You will  
need this key number if you ever  
have to get a lost key replaced. Keep  
the tag stored in a safe place. If you  
need to replace a key, use only  
Honda-approved key blanks.  
IGNITION KEY  
WITH REMOTE  
TRANSMITTER  
KEY NUMBER  
TAG  
Keep the keys away from liquids.  
If they get wet, dry them  
immediately with a soft cloth.  
Remote Transmitter  
On some types, your vehicle also  
comes with one or two remote  
transmitters depending on models;  
see page 117 for an explanation of  
the operation.  
IGNITION KEY  
111  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:25:39 32SAA650_115  
Keys and Locks  
Immobilizer System  
recognizes the key code:  
your vehicle undriveable.  
(For some types)  
The Immobilizer System protects  
your vehicle from theft. A properly-  
coded ignition key must be used in  
the ignition switch for the engine to  
start. If an improperly-coded key (or  
other device) is used, the engine’s  
fuel system is disabled.  
Do not keep other immobilizer  
keys on the same key ring.  
If you have lost your key and you  
cannot start the engine, contact your  
dealer.  
Use a plastic or leather key fob,  
not metal.  
(EU models)  
EC Directives  
Keep other keys away from your  
vehicle’s key and the ignition  
switch while trying to start the  
engine.  
This immobilizer system complies  
with the R & TTE (Radio equipment  
and Telecommunications Terminal  
Equipment and the mutual  
recognition of their conformity)  
Directives.  
When you turn the ignition switch to  
the ON (II) position, the immobilizer  
system indicator should come on for  
a few seconds, then go out. If the  
indicator starts to blink, it means the  
system does not recognize the  
coding of the key. Turn the ignition  
switch to the LOCK (0) position,  
remove the key, reinsert it, and turn  
the switch to the ON (II) position  
again.  
The system may not recognize your  
key’s coding if another immobilizer  
key or other metal object is near the  
ignition switch when you insert the  
key. To make sure the system  
If the system repeatedly does not  
recognize the coding of your key,  
contact your dealer.  
The immobilizer system indicator  
will also blink several times when  
you turn the ignition switch from the  
ON (II) position to the ACCESSORY  
(I) or the LOCK (0) position.  
Do not attempt to alter this system  
or add other devices to it. Electrical  
problems could result that may make  
112  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:25:47 32SAA650_116  
Keys and Locks  
Ignition Switch  
LOCK (0) You can insert or  
remove the key only in this position.  
To switch from the ACCESSORY (I)  
to the LOCK (0) position, you must  
push the key in slightly as you turn it.  
If your vehicle has an automatic  
transmission (CVT), the shift lever  
must also be in Park. The anti-theft  
lock will lock the steering column  
when you remove the key.  
Removing the key from the  
ignition switch while driving  
locks the steering. This can  
cause you to lose control of  
the vehicle.  
Remove the key from the  
ignition switch only when  
parked.  
If the front wheels are turned, the  
anti-theft lock may sometimes make  
it difficult to turn the key from the  
LOCK (0) to the ACCESSORY (I)  
position. Firmly turn the steering  
wheel to the left or to the right as  
you turn the key.  
ACCESSORY (I) In this position,  
you can operate the audio system  
(on some types), the cigarette lighter  
and the accessory power socket.  
The ignition switch is on the right  
side of the steering column. It has  
four positions:  
• LOCK (0)  
• ACCESSORY (I)  
• ON (II)  
ON (II) This is the normal key  
position when driving. All features  
and accessories on the vehicle are  
usable. Several of the indicators on  
the instrument panel come on as a  
test when you turn the ignition  
• START (III)  
switch from the ACCESSORY (I) to  
the ON (II) position.  
CONTINUED  
113  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:25:55 32SAA650_117  
Keys and Locks  
START (III) Use this position  
only to start the engine. The switch  
returns to the ON (II) position when  
you let go of the key.  
Door Locks  
LOCK TAB  
Unlock  
The engine will not start if the  
immobilizer system does not recog-  
nize the key’s coding (see page 112 ).  
On some types, you will hear a  
Lock  
reminder beeper if you leave the key  
in the ignition switch in the LOCK  
(0) or the ACCESSORY (I) position  
and open the driver’s door. Remove  
the key to turn off the beeper.  
KEY  
Each door has a lock tab on the top.  
Push the tab down to lock the door  
and pull it up to unlock.  
The front doors can be locked and  
unlocked from the outside with the  
key.  
To lock any passenger’s door when  
getting out of the vehicle, push the  
lock tab down and close the door. To  
lock the driver’s door, pull the  
outside door handle and push the  
lock tab down. Release the handle,  
then close the door.  
114  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:26:04 32SAA650_118  
Keys and Locks  
Power Door Locks  
(For some types)  
(For some types)  
MASTER DOOR LOCK BUTTON  
LOCK TAB  
Unlock  
Lock  
KEY  
The driver’s door has a master door  
lock button. Push the master door  
lock button to lock all doors and the  
tailgate. Push the button again to  
unlock them.  
Each door has a lock tab on the top.  
When you push down or pull up the  
lock tab on the driver’s door, all  
doors and the tailgate lock or unlock.  
The lock tab on each passenger’s  
door only locks and unlocks that  
door.  
The front doors can be locked and  
unlocked from the outside with the  
key. All doors and the tailgate lock  
or unlock when you use the key to  
lock or unlock the driver’s door.  
CONTINUED  
115  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:26:12 32SAA650_119  
Keys and Locks  
Lockout Prevention  
Super Locking  
The super locking will not set if any  
door or the tailgate is not fully closed.  
It will be set even if the bonnet, any  
window or the sunroof is open.  
If you forget and leave the key in the  
ignition switch, Lockout Prevention  
will not allow you to lock the driver’s  
door. With the driver’s door open  
and the key in the ignition, the  
master door lock switch (on some  
types) is disabled. However, if the  
driver’s door is not open, the master  
door lock switch is not disabled. If  
you try to lock an open driver’s door  
by pushing down the lock tab, the  
tabs on all doors pop out. Pushing  
down the lock tab on the front  
(For some types)  
With the super locking set, the  
master door lock switch on the  
driver’s door and the lock tabs on all  
doors are disabled.  
If there are persons inside the  
vehicle with the super  
locking set, they cannot  
unlock the door from the  
inside.  
passenger’s door only locks that door.  
The super locking helps to protect  
your vehicle and valuables from theft.  
To set the super locking, turn the  
key towards the front of the vehicle  
twice within 5 seconds.  
Make sure there is no person  
inside the vehicle before  
setting the super locking.  
You can also set the super locking  
with the tailgate lock. Turn the key  
twice to lock within 5 seconds.  
116  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:26:19 32SAA650_120  
Keys and Locks  
On some types, you can set the  
super locking with the remote  
transmitter. To set it, push the  
LOCK button twice within 5 seconds  
(see page 118 ).  
Remote Transmitter  
(For some types)  
When you push the UNLOCK button,  
all doors and the tailgate unlock. All  
outside turn signals and both  
indicators in the instrument panel  
flash once each time you push the  
button.  
LOCK  
BUTTON  
To reset the super locking, unlock  
the driver’s door or the tailgate with  
the key or the remote transmitter.  
UNLOCK  
BUTTON  
You can lock and unlock your vehicle  
with the remote transmitter. When  
you push the LOCK button, all doors  
and the tailgate lock.  
When you push the LOCK button on  
the remote transmitter, all outside  
turn signals and both indicators in  
the instrument panel flash three  
times to verify the doors and the  
tailgate are locked.  
CONTINUED  
117  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:26:28 32SAA650_121  
Keys and Locks  
The ceiling light (if the ceiling light  
switch is in the centre position) will  
come on when you press the  
UNLOCK button. If you do not open  
any door or the tailgate, the light will  
fade out in about 30 seconds. If you  
relock the doors and the tailgate  
with the remote transmitter before  
30 seconds have elapsed, the light  
will go off immediately.  
Super Locking  
(For some types)  
The super locking helps to protect  
your vehicle and valuables from theft.  
To set the super locking, push the  
LOCK button twice within 5 seconds.  
If there are persons inside the  
vehicle with the super  
locking set, they cannot  
unlock the door from the  
inside.  
The super locking will not set if any  
door or the tailgate is not fully closed.  
It will be set even if the bonnet, any  
window or the sunroof is open.  
Make sure there is no person  
inside the vehicle before  
setting the super locking.  
If you unlock the doors and the  
tailgate with the remote transmitter,  
but do not open any door or the  
tailgate within 30 seconds, all doors  
and the tailgate automatically relock.  
To reset the super locking, push the  
UNLOCK button on the remote  
transmitter, or unlock the driver’s  
door with the key.  
You cannot lock or unlock the doors  
and the tailgate with the remote  
transmitter if any door or the tailgate  
is not fully closed or the key is in the  
ignition switch.  
See page 116 for information on the  
super locking.  
118  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:26:36 32SAA650_122  
Keys and Locks  
Replacing the Battery  
When the remote transmitter’s  
battery begins to get weak, it may  
take several pushes on the button to  
lock or unlock the doors and tailgate,  
and the LED will not light. Replace  
the battery as soon as possible.  
BATTERY  
Battery type: CR1616  
SCREW  
TAB  
To replace the battery:  
3. Inside the transmitter, separate  
the inner cover from the keypad  
by releasing the two tabs on the  
cover.  
1. Remove the screw at the base of  
the transmitter with a small  
Phillips-head screwdriver.  
2. Separate the transmitter by prying  
its middle seam with your  
fingernail.  
119  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:26:45 32SAA650_123  
Keys and Locks  
4. Remove the old battery from the  
back of the inner cover, and note  
the polarity. Make sure the  
(EU models)  
Transmitter Care  
Avoid dropping or throwing the  
transmitter.  
EC Directives  
This keyless entry system complies  
with the R & TTE (Radio equipment  
and Telecommunications Terminal  
Equipment and the mutual  
recognition of their conformity)  
Directives.  
polarity of the new battery is the  
same (side facing down), then  
insert it into the back of the cover.  
Protect the transmitter from  
extreme temperature.  
This symbol on the battery  
means that this product must  
not be treated as household  
waste.  
Do not immerse the transmitter in  
any liquid.  
If you lose a transmitter, the  
replacement needs to be  
reprogrammed by your dealer.  
An improperly disposed of battery  
can be harmful to the environment  
and human health.  
Always confirm local regulations for  
battery disposal.  
5. Install the parts in reverse order.  
120  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:26:54 32SAA650_124  
Keys and Locks  
Childproof Door Locks  
Tailgate  
For some types  
The tailgate will also lock or unlock  
when you lock or unlock the driver’s  
door by using the lock tab, the key,  
or the master door lock switch.  
On vehicles with remote  
transmitters, the tailgate will also  
lock or unlock when you lock or  
unlock the doors with the  
transmitter.  
LEVER  
When you lock the doors and the  
tailgate with the remote transmitter,  
all outside turn signals and both  
indicators in the instrument panel  
flash three times to verify the doors  
and the tailgate are locked. When  
you unlock them, the lights flash  
once.  
KEY  
The childproof door locks are  
designed to prevent children seated  
in the rear from accidentally opening  
the rear doors. Each rear door has a  
lock lever near the edge. With the  
lever in the LOCK position, the door  
cannot be opened from the inside  
regardless of the position of the lock  
tab. To open the door, pull the lock  
tab up and use the outside door  
handle.  
For some types  
Use the key to lock or unlock the  
tailgate lock.  
CONTINUED  
121  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:27:02 32SAA650_125  
Keys and Locks  
COVER  
TAILGATE  
HANDLE  
HANDLE  
To open the tailgate, pull the handle,  
then lift up the tailgate.  
To close the tailgate, hold the  
On vehicles with remote transmitter  
tailgate handle and lower the tailgate, If the power door lock system cannot  
then press down on the back edge.  
unlock the tailgate, unlock it  
manually.  
See page 241 for the information on  
luggage loading. Keep the tailgate  
closed at all times while driving to  
avoid damaging the tailgate, and to  
prevent exhaust gas from getting  
into the interior. See Carbon  
1. Place a cloth on the edge of the  
cover, then use a small flat-tipped  
screwdriver to remove the cover  
on the back of the tailgate.  
Monoxide Hazard on page 79 .  
122  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:27:09 32SAA650_126  
Keys and Locks  
Glove Box  
COVER  
An open glove box can cause  
serious injury to your  
passenger in a crash, even if  
the passenger is wearing the  
seat belt.  
Always keep the glove box  
closed while driving.  
GLOVE BOX  
LEVER  
2. Turn the inside lever right to  
unlock the tailgate.  
Open the glove box by pushing the  
handle. Close it with a firm push.  
If you need to unlock the tailgate  
manually, it means there is a  
problem with the tailgate. Have the  
vehicle checked by your dealer.  
123  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:27:16 32SAA650_127  
Seats  
Front Seat Adjustments  
See pages 15 17 for important safety  
information and warnings about how to  
properly position the seats and seat-  
backs.  
Make all seat adjustments before  
you start driving.  
LEVER  
LEVER  
To adjust the seat forward and  
backward, pull up on the lever under  
the seat cushion’s front edge. Move  
the seat to the desired position and  
release the lever. Try to move the  
seat to make sure it is locked in  
position.  
On some types, the seat can also be  
adjusted forward and backward  
using the lever on the side of the  
seat-back. Pull out the lever and push  
it forward holding the seat-back with  
your hand. Move the seat to the  
desired position and check the seat  
to make sure it is locked in position.  
124  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:27:26 32SAA650_128  
Seats  
Driver’s Seat Height Adjustment  
Head Restraints  
See page 17 for important safety  
DIAL  
information and a warning about how to  
properly position the head restraints.  
Your vehicle has adjustable head  
restraints on the front seats. The  
rear seat also has head restraints on  
the outside positions, but they are  
not adjustable.  
LEVER  
The head restraints help protect you  
and your passengers from whiplash  
and other injuries.  
To change the angle of the seat-back,  
pull up on the lever on the outside of  
the seat bottom. Move the seat-back  
to the desired position and release  
the lever. Let the seat-back latch into  
the new position.  
See pages 15 17 for important safety  
information and warnings about how to  
properly position the seats and seat-  
backs.  
The height of your driver’s seat is  
adjustable. Turn the front dial on the  
outside of the seat cushion to change  
the height.  
Make all adjustments before you  
start driving.  
CONTINUED  
125  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:27:33 32SAA650_129  
Seats  
RELEASE  
BUTTON  
FRONT  
REAR CENTRE  
RELEASE  
BUTTON  
They are most effective when you  
adjust them so the back of the  
occupant’s head rests against the  
centre of the restraint. A taller  
person should adjust the restraint as  
high as possible.  
The front head restraints adjust for  
height. You need both hands to  
adjust the restraint. Do not attempt  
to adjust it while driving. To raise it,  
pull upward. To lower the restraint,  
push the release button sideways  
and push the restraint down.  
On vehicles with rear centre head  
restraint  
The rear centre head restraint  
adjusts for height. You need both  
hands to adjust the restraint. Do not  
attempt to adjust it while driving. To  
raise it, pull upward. To lower the  
restraint, push the release button  
sideways and push the restraint  
down.  
To remove the front or rear outside  
head restraint for cleaning or repair,  
pull it up as far as it will go. Push the  
release button and pull the restraint  
out of the seat-back.  
126  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:27:43 32SAA650_130  
Seats  
To remove the rear centre head  
restraint for cleaning or repair, pull it  
up as far as it will go. Push the  
release button and pull the restraint  
out of the seat-back.  
Folding the Rear Seats  
The left and right rear seat cushions  
can be lifted up separately.  
Make sure there are no items on the  
floor before folding down the seats.  
Always replace the rear head  
restraints when the seat-backs are  
returned to upright position.  
This label on the back of  
rear seats guides you to  
refer to the Owner’s Manual for  
correct operation.  
Failure to reinstall the head  
restraints can result in severe  
injury during a crash.  
Only on vehicles equipped with lap belt  
When lifting the rear seat cushion up, Lift the rear seat cushion up and fold  
store the lap belt in the pocket in the  
rear seat back (see page 129 ).  
the leg down. Push the seat cushion  
firmly against the seat-back to lock it.  
Always replace the head  
restraints before driving.  
CONTINUED  
127  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:27:51 32SAA650_131  
Seats  
Create the Luggage Space  
For greater luggage capacity, the  
rear seat can be folded down.  
LEG  
Make sure there are no items on the  
floor before folding down the seats.  
The left and right halves of the rear  
seat can be folded up separately.  
LEVER  
FLOOR GUIDE  
To return the seat cushion to its  
original position, unfold the legs and  
lower it slowly holding the seat  
cushion with your hands. Set the  
legs in the floor guides and make  
sure they are securely locked into  
place.  
Before folding down the rear seat-  
back, move the front seat to the  
forward most position (see page  
124 ).  
128  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:27:59 32SAA650_132  
Seats  
(For some types)  
LEVER  
LEVER  
On some types, the seat can also be  
adjusted forward and backward  
using the lever on the side of the  
seat-back. Pull out the lever and push back.  
it forward holding the seat-back with  
your hand. Move the seat to the  
forward most position and check the  
seat to make sure it is locked in  
position.  
When folding the rear seat, store the  
belt in the pocket in the rear seat-  
Pull the release lever up to unlatch  
the seat-back. Move the seat belt out  
of the way and fold the seat-back  
down holding it with your hands.  
Before returning the rear seat-back  
to the upright position, move the  
front seat to the forward most  
position.  
CONTINUED  
129  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:28:05 32SAA650_133  
Seats  
LEG  
FLOOR GUIDE  
To lock the seat-back upright, lift the  
seat-back and the seat bottom up,  
push them firmly against the latch.  
Tug on the seat-back to ensure that  
it is latched.  
To return the seat cushion to its  
original position, unfold the legs and  
lower it slowly holding the seat  
cushion with your hands. Set the  
legs in the floor guides and make  
sure they are securely locked into  
place.  
Adjust the front seat position.  
130  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:28:12 32SAA650_134  
Seats  
Detachable Anchor  
RETRACTOR  
HOUSING  
SMALL LATCH  
PLATE  
(For some types)  
SMALL LATCH  
PLATE  
The seat belt in the rear centre seat  
is equipped with a detachable anchor.  
This allows the centre seat belt to be  
unlatched when the right side of the  
rear seat is folded.  
ANCHOR  
BUCKLE  
TRIANGLE MARKS  
Using the seat belt with the  
detachable anchor unlatched  
increases the chance of  
serious injury or death in a  
crash.  
LATCH PLATE  
To unlatch the detachable anchor  
before folding the seat-back, insert  
the latch plate into the slot on the  
side of the anchor buckle and allow  
the seat belt to retract. Store the  
small latch plate and seat belt latch  
plate in the retractor housing.  
When the seat-back is returned to its  
upright position, be sure to latch the  
detachable anchor by lining up the  
triangle marks on the small latch  
plate and anchor buckle, then insert  
the plate into the buckle. Tug on the  
seat belt to verify that the detachable  
anchor is securely latched. Make  
sure the seat belt is not twisted.  
Before using the seat belt,  
make sure the detachable  
anchor is correctly latched.  
131  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:28:20 32SAA650_135  
Tonneau Cover (For some types)  
MOUNTING ROD  
SLOT  
TONNEAU COVER  
1. Release the left side of the  
tonneau cover by pushing the left  
edge of the unit toward the right  
edge and lifting it up.  
3. To use the tonneau cover, place  
To extend the rear side tonneau  
cover, pull the cover’s leading edge  
out of its housing and set the  
mounting rods in the slots at both  
sides of the tailgate opening.  
the left edge into the holder and  
push the edge inward and push  
the right edge down into its holder  
until it locks into place.  
2. Refer to page 127 for the folding  
of the rear seat.  
Make sure it is securely latched so it  
will not come loose while you are  
driving.  
132  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:28:25 32SAA650_136  
Tonneau Cover (For some types)  
To retract the cover, release the rods The tonneau cover may be removed  
from the slots and guide the cover so  
it rolls back fully into it’s housing.  
to give you more luggage space.  
Reverse the installation procedure to  
store the tonneau cover.  
Do not store parcels on the tonneau  
cover. The tonneau cover may break  
if weight is placed on it.  
133  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:28:31 32SAA650_137  
Power Windows (For some types)  
All four windows (on some types,  
two front windows) are electrically-  
powered. Turn the ignition switch to  
the ON (II) position to raise or lower  
any window.  
DRIVER’S WINDOW SWITCH  
Closing a power window on  
someone’s hands or fingers  
can cause serious injury.  
Each door has a switch that controls  
its window. To open the window,  
push the switch down and hold it.  
Release the switch when you want  
the window to stop. Close the  
window by pulling back on the  
switch and holding it.  
Make sure your passengers  
are away from the windows  
before closing them.  
WARNING: Always take the ignition  
key with you whenever you leave the  
vehicle alone (with other occupants).  
MAIN SWITCH  
The rear door windows open only  
halfway.  
The driver’s door armrest has a  
master power window control panel.  
To open any of the passenger’s win-  
dows, push down on the appropriate  
switch and hold it until the window  
reaches the desired position. To  
close the window, pull back on the  
window switch. Release the switch  
when the window gets to the position  
you want.  
134  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:28:39 32SAA650_138  
Power Windows (For some types)  
The master control panel also con-  
tains these extra features:  
The MAIN switch controls power to  
Auto Reverse  
the passengers’ windows. When you  
push in the MAIN switch, the  
passengers’ windows cannot be  
raised or lowered. The MAIN switch  
does not affect the driver’s window.  
To cancel this feature, push on the  
switch again to get it to pop out.  
Keep the MAIN switch pushed in  
when you have children in the  
vehicle so they do not injure them-  
selves by operating the windows  
unintentionally.  
On vehicles with driver’s window auto  
feature  
AUTO To open and, on some  
types, also to close the driver’s  
window fully, push down or pull back  
on the window switch firmly and  
release it. The window automatically  
goes all the way up or down. To stop  
the window from going all the way,  
pull back on the window switch if it  
is opening or push down if it is  
closing. To open or close the driver’s  
window only partially, push down or  
pull back on the window switch  
lightly and hold it. The window will  
stop as soon as you release the  
switch.  
If the driver’s window senses any  
obstacle while it is closing with the  
AUTO feature, the window will stop  
and then automatically begin to  
lower itself.  
Even with this feature, you should  
still check that all passengers and  
objects are away from the window  
before closing it. This feature is not  
functional when the window is very  
close to the fully raised position.  
The lights inside the switches come  
on when you turn the ignition switch  
to the ON (II) position.  
CONTINUED  
135  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:28:47 32SAA650_139  
Power Windows (For some types), Sunroof  
Any impact due to road conditions  
may cause the auto reverse function  
to work unexpectedly on the closing  
window. If it happens frequently,  
there is a problem with your power  
window system. You should have  
your vehicle inspected by your  
dealer. You can still close the  
If your vehicle’s battery is  
Sunroof  
disconnected or goes dead, or the  
driver’s window fuse is removed, the  
AUTO feature of the driver’s window  
will be disabled. The power window  
system needs to be reset after  
(For some types)  
OPEN/CLOSE SWITCH  
reconnecting the battery or installing  
the fuse. You should do the following.  
window by pulling back on the  
window switch lightly and holding it.  
1. Start the engine. Push down on  
the driver’s window switch until  
the window is fully open.  
2. Pull back on the driver’s window  
switch to close the window  
completely and hold the switch for  
a further second.  
TILT-UP SWITCH  
There are two switches on the  
ceiling near the front ceiling light.  
The ignition switch must be in the  
ON (II) position.  
To open the sunroof, pull the OPEN/  
CLOSE switch backward. Push the  
switch forward to close it.  
If the power windows do not operate  
properly after resetting, have your  
vehicle checked by your dealer.  
When you push the TILT-UP switch,  
rear of the sunroof will tilt up. To tilt  
it down, push the OPEN/CLOSE  
switch forward.  
136  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:28:55 32SAA650_140  
Sunroof, Mirrors  
(For some types)  
Mirrors  
If you push and hold the sunroof  
switch to close the sunroof fully, the  
sunroof automatically stops at a  
preset position. Release the switch  
once, and push it forward again to  
close the sunroof completely.  
Opening or closing the  
sunroof on someone’s hands  
or fingers can cause serious  
injury.  
Make sure all hands and  
fingers are clear of the  
sunroof before opening or  
closing it.  
WARNING: Extending the head, arms  
or other parts of the body through the  
sunroof while the vehicle is moving can  
cause serious injury or death.  
TAB  
Keep the inside and outside mirrors  
clean and adjusted for best visibility.  
Be sure to adjust the mirrors before  
you start driving.  
If you try to open the sunroof in  
below-freezing temperatures, or  
when it is covered with snow or ice,  
you can damage the sunroof panel or  
motor.  
The inside mirror has day and night  
positions. The night position reduces  
glare from headlights behind you.  
Flip the tab on the bottom edge of  
the mirror to select the day or night  
position.  
WARNING: Always take the ignition  
key with you whenever you leave the  
vehicle alone (with other occupants).  
137  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:29:06 32SAA650_141  
Mirrors  
Adjusting the Power Mirrors  
(For some types)  
Heated Door Mirrors  
MIRROR DEMISTER BUTTON  
SELECTOR SWITCH  
ADJUSTMENT SWITCH  
On some types, the outside mirrors  
are heated to remove fog and frost.  
Press the demister button to turn on  
the heaters when the ignition switch  
is in the ON (II) position. The light in  
the button comes on as a reminder.  
Press the button again to turn the  
heaters off.  
Adjust the outside mirrors with the  
adjustment switch on the driver’s  
side of the dashboard:  
3. Push the appropriate edge of the  
adjustment switch to move the  
mirror right, left, up, or down.  
1. Turn the ignition switch to the  
ON (II) position.  
2. Move the selector switch to L (left  
side) or R (right side).  
4. When you finish, move the  
selector switch to the centre (off)  
position. This turns off the  
adjustment switch so you can’t  
move a mirror out of position by  
accidentally bumping the switch.  
When the demister is on, the rear  
window demister (see page  
on, too.  
) is  
106  
138  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:29:14 32SAA650_142  
Mirrors, Sun Visor  
Folding Door Mirrors  
(For some types)  
Never drive your vehicle with the  
outside mirrors folded.  
Sun Visor  
FOLDING SWITCH  
To use the sun visor, pull it down.  
You can also use the sun visor at the  
side window. Remove the support  
rod from the clip and swing the sun  
visor toward the side window.  
Door mirrors can be folded by the  
folding switch next to the selector  
switch, which enables you to park  
your vehicle in a limited parking  
space easily. Make sure to fold out  
the mirrors before you start driving.  
With the ignition switch is in the ON  
(II) position, press the folding switch  
to fold up both outside mirrors simul-  
taneously. To fold out, press the  
switch again.  
Make sure you put the sun visor  
back in place when you are getting  
into or out of the vehicle.  
139  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:29:20 32SAA650_143  
Vanity Mirror, Parking Brake  
Vanity Mirror  
Parking Brake  
Driving the vehicle with the parking  
brake applied can damage the rear  
brakes and axles.  
VANITY MIRROR  
PARKING BRAKE LEVER  
To use a vanity mirror on the back of  
the sun visor, pull up the cover.  
To apply the parking brake, pull the  
lever up fully. To release it, pull up  
slightly, push the button, and lower  
the lever. The parking brake  
indicator on the instrument panel  
should go out when the parking  
brake is fully released (see page 95 ).  
140  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:29:28 32SAA650_144  
Coat Hook, Beverage Holder  
Coat Hook  
(For some types)  
Beverage Holder  
GRAB RAIL  
COAT HOOK  
Be careful when you are using the  
beverage holder. A spilled liquid that  
is very hot can scald you or your  
passengers. Spilled liquids can also  
damage the upholstery, carpeting,  
and electrical components in the  
interior.  
The beverage holders for the rear  
passengers are located on the upper-  
rear section of the centre console.  
The rear seat grab rails can also be  
used as coat hook.  
This hook is not designed for large  
or heavy items.  
141  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:29:36 32SAA650_145  
Cigarette Lighter, Ashtray  
Cigarette Lighter  
(For some types)  
Ashtray  
(For some types)  
Use the ashtray only for cigarettes,  
cigars, and other smoking materials.  
To prevent a possible fire and  
damage to your vehicle, don’t put  
paper or other things that can burn  
in the ashtray.  
CIGARETTE LIGHTER  
ASHTRAY  
The ignition switch must be in the  
ACCESSORY (I) or the ON (II)  
position for the cigarette lighter to  
work. To heat up the lighter, push it  
in. It will pop out when it is ready for  
use. Do not hold the lighter in while  
it is heating up, you could cause it to  
overheat.  
To use the front ashtray, swing the  
lid open. To remove it, pull it straight  
up with lid closed.  
142  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:29:44 32SAA650_146  
Accessory Power Socket  
Accessory Power Socket  
(For some types)  
It will not power an automotive type  
cigarette lighter element.  
If used without the engine running,  
the battery may run out very quickly.  
It is recommended that only genuine  
Honda Accessories are used for this  
socket. Improper accessories may  
cause problems.  
Always put the cover on when not in  
use in order to prevent objects  
entering into the socket.  
Pull up  
To use the accessory power socket,  
pull the cover up. The ignition switch  
must be in the ACCESSORY (I) or  
the ON (II) position.  
This socket is intended to supply  
power for 12 volt DC accessories  
that are rated 120 watts or less (10  
amps).  
143  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:29:53 32SAA650_147  
Luggage Hooks, Interior Lights  
Luggage Hooks  
Spotlights  
(For some types)  
Individual Map Lights  
(For some types)  
HOOK  
The hooks on the floor of the  
luggage area enable you to tie down  
items stored in the back. Make sure  
all stored items are secured before  
driving.  
The front ceiling light also contains  
two spotlights.  
Turn on each individual map light by  
pushing the lens. Push the lens again  
to turn it off. You can use the  
Turn on the spotlight by pushing the  
button next to each light. Push the  
button again to turn it off. You can  
use the spotlights at all times.  
individual map lights at all times.  
144  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:30:01 32SAA650_148  
Interior Lights  
Ceiling Light  
Luggage Area Light  
Rear  
OFF  
DOOR ACTIVATED  
ON  
Front  
DOOR ACTIVATED  
OFF  
ON  
Each ceiling light has a three-  
The front and rear ceiling lights  
(with each switch in the centre  
position) come on when you unlock  
the door with the key or the remote  
transmitter (see page 117 ).  
The luggage area light comes on  
when you open the tailgate.  
position switch. In the OFF position,  
the light does not come on. In the  
centre position, the ceiling light  
comes on when you open any door.  
After all doors are closed tightly, the  
light goes out. On some types, the  
light fades out in about six seconds.  
In the ON position, the ceiling light  
stays on continuously.  
The ceiling lights (with each switch  
in the centre position) will also come  
on when you remove the key from  
the ignition switch. If you do not  
open a door, the lights stay on, then  
fade out in about 30 seconds.  
145  
Instruments and Controls  
Downloaded from engine  
07/09/12 09:30:04 32SAA650_149  
146  
Downloaded from engine  

Related Topics

Popular Owner Manuals