07/09/12 09:28:39 32SAA650_138
Power Windows (For some types)
The master control panel also con-
tains these extra features:
The MAIN switch controls power to
Auto Reverse
the passengers’ windows. When you
push in the MAIN switch, the
passengers’ windows cannot be
raised or lowered. The MAIN switch
does not affect the driver’s window.
To cancel this feature, push on the
switch again to get it to pop out.
Keep the MAIN switch pushed in
when you have children in the
vehicle so they do not injure them-
selves by operating the windows
unintentionally.
On vehicles with driver’s window auto
feature
AUTO － To open and, on some
types, also to close the driver’s
window fully, push down or pull back
on the window switch firmly and
release it. The window automatically
goes all the way up or down. To stop
the window from going all the way,
pull back on the window switch if it
is opening or push down if it is
closing. To open or close the driver’s
window only partially, push down or
pull back on the window switch
lightly and hold it. The window will
stop as soon as you release the
switch.
If the driver’s window senses any
obstacle while it is closing with the
AUTO feature, the window will stop
and then automatically begin to
lower itself.
Even with this feature, you should
still check that all passengers and
objects are away from the window
before closing it. This feature is not
functional when the window is very
close to the fully raised position.
The lights inside the switches come
on when you turn the ignition switch
to the ON (II) position.
CONTINUED
135
Instruments and Controls
English 
