Get Instruments and Controls -> Seats Guide for Honda Jazz 4 Door Second Generation (2009-2015)

07/09/12 09:27:16 32SAA650_127

Seats

Front Seat Adjustments

See pages 15 － 17 for important safety

information and warnings about how to

properly position the seats and seat-

backs.

Make all seat adjustments before

you start driving.

LEVER

To adjust the seat forward and

backward, pull up on the lever under

the seat cushion’s front edge. Move

the seat to the desired position and

release the lever. Try to move the

seat to make sure it is locked in

position.

On some types, the seat can also be

adjusted forward and backward

using the lever on the side of the

seat-back. Pull out the lever and push

it forward holding the seat-back with

your hand. Move the seat to the

desired position and check the seat

to make sure it is locked in position.

124

Instruments and Controls

Downloaded from engine

07/09/12 09:27:26 32SAA650_128

Seats

Driver’s Seat Height Adjustment

Head Restraints

See page 17 for important safety

DIAL

information and a warning about how to

properly position the head restraints.

Your vehicle has adjustable head

restraints on the front seats. The

rear seat also has head restraints on

the outside positions, but they are

not adjustable.

LEVER

The head restraints help protect you

and your passengers from whiplash

and other injuries.

To change the angle of the seat-back,

pull up on the lever on the outside of

the seat bottom. Move the seat-back

to the desired position and release

the lever. Let the seat-back latch into

the new position.

See pages 15 － 17 for important safety

information and warnings about how to

properly position the seats and seat-

backs.

The height of your driver’s seat is

adjustable. Turn the front dial on the

outside of the seat cushion to change

the height.

Make all adjustments before you

start driving.

CONTINUED

125

Instruments and Controls

Downloaded from engine

07/09/12 09:27:33 32SAA650_129

Seats

RELEASE

BUTTON

FRONT

REAR CENTRE

RELEASE

BUTTON

They are most effective when you

adjust them so the back of the

occupant’s head rests against the

centre of the restraint. A taller

person should adjust the restraint as

high as possible.

The front head restraints adjust for

height. You need both hands to

adjust the restraint. Do not attempt

to adjust it while driving. To raise it,

pull upward. To lower the restraint,

push the release button sideways

and push the restraint down.

On vehicles with rear centre head

restraint

The rear centre head restraint

adjusts for height. You need both

hands to adjust the restraint. Do not

attempt to adjust it while driving. To

raise it, pull upward. To lower the

restraint, push the release button

sideways and push the restraint

down.

To remove the front or rear outside

head restraint for cleaning or repair,

pull it up as far as it will go. Push the

release button and pull the restraint

out of the seat-back.

126

Instruments and Controls

Downloaded from engine

07/09/12 09:27:43 32SAA650_130

Seats

To remove the rear centre head

restraint for cleaning or repair, pull it

up as far as it will go. Push the

release button and pull the restraint

out of the seat-back.

Folding the Rear Seats

The left and right rear seat cushions

can be lifted up separately.

Make sure there are no items on the

floor before folding down the seats.

Always replace the rear head

restraints when the seat-backs are

returned to upright position.

This label on the back of

rear seats guides you to

refer to the Owner’s Manual for

correct operation.

Failure to reinstall the head

restraints can result in severe

injury during a crash.

Only on vehicles equipped with lap belt

When lifting the rear seat cushion up, Lift the rear seat cushion up and fold

store the lap belt in the pocket in the

rear seat back (see page 129 ).

the leg down. Push the seat cushion

firmly against the seat-back to lock it.

Always replace the head

restraints before driving.

CONTINUED

127

Instruments and Controls

Downloaded from engine

07/09/12 09:27:51 32SAA650_131

Seats

Create the Luggage Space

For greater luggage capacity, the

rear seat can be folded down.

LEG

Make sure there are no items on the

floor before folding down the seats.

The left and right halves of the rear

seat can be folded up separately.

LEVER

FLOOR GUIDE

To return the seat cushion to its

original position, unfold the legs and

lower it slowly holding the seat

cushion with your hands. Set the

legs in the floor guides and make

sure they are securely locked into

place.

Before folding down the rear seat-

back, move the front seat to the

forward most position (see page

124 ).

128

Instruments and Controls

Downloaded from engine

07/09/12 09:27:59 32SAA650_132

Seats

(For some types)

LEVER

On some types, the seat can also be

adjusted forward and backward

using the lever on the side of the

seat-back. Pull out the lever and push back.

it forward holding the seat-back with

your hand. Move the seat to the

forward most position and check the

seat to make sure it is locked in

position.

When folding the rear seat, store the

belt in the pocket in the rear seat-

Pull the release lever up to unlatch

the seat-back. Move the seat belt out

of the way and fold the seat-back

down holding it with your hands.

Before returning the rear seat-back

to the upright position, move the

front seat to the forward most

position.

CONTINUED

129

Instruments and Controls

Downloaded from engine

07/09/12 09:28:05 32SAA650_133

Seats

LEG

FLOOR GUIDE

To lock the seat-back upright, lift the

seat-back and the seat bottom up,

push them firmly against the latch.

Tug on the seat-back to ensure that

it is latched.

To return the seat cushion to its

original position, unfold the legs and

lower it slowly holding the seat

cushion with your hands. Set the

legs in the floor guides and make

sure they are securely locked into

place.

Adjust the front seat position.

130

Instruments and Controls

Downloaded from engine

07/09/12 09:28:12 32SAA650_134

Seats

Detachable Anchor

RETRACTOR

HOUSING

SMALL LATCH

PLATE

(For some types)

SMALL LATCH

PLATE

The seat belt in the rear centre seat

is equipped with a detachable anchor.

This allows the centre seat belt to be

unlatched when the right side of the

rear seat is folded.

ANCHOR

BUCKLE

TRIANGLE MARKS

Using the seat belt with the

detachable anchor unlatched

increases the chance of

serious injury or death in a

crash.

LATCH PLATE

To unlatch the detachable anchor

before folding the seat-back, insert

the latch plate into the slot on the

side of the anchor buckle and allow

the seat belt to retract. Store the

small latch plate and seat belt latch

plate in the retractor housing.

When the seat-back is returned to its

upright position, be sure to latch the

detachable anchor by lining up the

triangle marks on the small latch

plate and anchor buckle, then insert

the plate into the buckle. Tug on the

seat belt to verify that the detachable

anchor is securely latched. Make

sure the seat belt is not twisted.

Before using the seat belt,

make sure the detachable

anchor is correctly latched.

131

Instruments and Controls

Downloaded from engine

Instruments and Controls -> Seats for Your Honda Jazz 4 Door Second Generation (2009-2015)

Related Topics

Popular Owner Manuals

Latest Owner Manuals