07/09/12 09:23:41 32SAA650_101
Gauges
Outside Temperature Indicator
(For some types)
This indicator displays the outside
temperature in Centigrade.
If the outside temperature is
When it reaches the desired value,
release the Select/Reset knob. You
should see the new outside
incorrectly displayed, you can adjust
it up to ±3°C warmer or cooler.
temperature displayed.
NOTE: The temperature must be
stabilized before doing this
procedure.
The temperature sensor is located in
the front bumper. Therefore, the
temperature reading can be affected
by heat reflection from the road sur-
face, engine heat, and the exhaust
from surrounding traffic. This can
cause an incorrect temperature read-
ing when your speed is under
In certain weather conditions,
temperature readings near freezing
0°C could mean that ice is forming
on the road surface.
Press the Select/Reset knob for 10
seconds. The following sequence will
appear for one second each: 0, 1, 2, 3,
－3, －2, －1, 0.
30 km/h (19 mph).
When you start your trip, the sensor
is not fully acclimatized, therefore it
may take several minutes until the
proper temperature is displayed.
98
Instruments and Controls
English 
