07/09/12 09:28:47 32SAA650_139
Power Windows (For some types), Sunroof
Any impact due to road conditions
may cause the auto reverse function
to work unexpectedly on the closing
window. If it happens frequently,
there is a problem with your power
window system. You should have
your vehicle inspected by your
dealer. You can still close the
If your vehicle’s battery is
Sunroof
disconnected or goes dead, or the
driver’s window fuse is removed, the
AUTO feature of the driver’s window
will be disabled. The power window
system needs to be reset after
(For some types)
OPEN/CLOSE SWITCH
reconnecting the battery or installing
the fuse. You should do the following.
window by pulling back on the
window switch lightly and holding it.
1. Start the engine. Push down on
the driver’s window switch until
the window is fully open.
2. Pull back on the driver’s window
switch to close the window
completely and hold the switch for
a further second.
TILT-UP SWITCH
There are two switches on the
ceiling near the front ceiling light.
The ignition switch must be in the
ON (II) position.
To open the sunroof, pull the OPEN/
CLOSE switch backward. Push the
switch forward to close it.
If the power windows do not operate
properly after resetting, have your
vehicle checked by your dealer.
When you push the TILT-UP switch,
rear of the sunroof will tilt up. To tilt
it down, push the OPEN/CLOSE
switch forward.
136
Instruments and Controls
English 
