Get Instruments and Controls -> Keys and Locks Guide for Honda Jazz 4 Door Second Generation (2009-2015)

07/09/12 09:25:21 32SAA650_113

Controls Near the Steering Wheel, Keys and Locks

3. Push the lever up to lock the

steering wheel in that position.

Keys

Two ignition keys come with your

vehicle. You should keep one of

them in a safe place, away from the

vehicle, as a spare.

4. Make sure you have securely

locked the steering wheel in place

by trying to move it up and down.

They fit all the locks on your vehicle:

• Ignition

• Door(s)

• Tailgate (for some types)

LEVER

To adjust the steering wheel upward

or downward:

1. Push the lever under the steering

column all the way down.

2. Move the steering wheel to the

desired position, making sure the

wheel points toward your chest,

not toward your face. Make sure

you can see the instrument panel

gauges and the indicators.

110

Instruments and Controls

Downloaded from engine

07/09/12 09:25:30 32SAA650_114

Keys and Locks

(On vehicles with immobilizer

IGNITION KEYS

WITH REMOTE

TRANSMITTER

KEY NUMBER

TAG

KEY NUMBER IGNITION KEYS

TAG

system)

These keys contain electronic

circuits that are activated by the

Immobilizer System. They will not

work to start the engine if the

circuits are damaged.

Protect the keys from direct

sunlight, high temperature, and

high humidity.

Do not drop the keys or set heavy

objects on them.

You should have received a key

number tag with your keys. You will

need this key number if you ever

have to get a lost key replaced. Keep

the tag stored in a safe place. If you

need to replace a key, use only

Honda-approved key blanks.

IGNITION KEY

WITH REMOTE

TRANSMITTER

KEY NUMBER

TAG

Keep the keys away from liquids.

If they get wet, dry them

immediately with a soft cloth.

Remote Transmitter

On some types, your vehicle also

comes with one or two remote

transmitters depending on models;

see page 117 for an explanation of

the operation.

IGNITION KEY

111

Instruments and Controls

Downloaded from engine

07/09/12 09:25:39 32SAA650_115

Keys and Locks

Immobilizer System

recognizes the key code:

your vehicle undriveable.

(For some types)

The Immobilizer System protects

your vehicle from theft. A properly-

coded ignition key must be used in

the ignition switch for the engine to

start. If an improperly-coded key (or

other device) is used, the engine’s

fuel system is disabled.

Do not keep other immobilizer

keys on the same key ring.

If you have lost your key and you

cannot start the engine, contact your

dealer.

Use a plastic or leather key fob,

not metal.

(EU models)

EC Directives

Keep other keys away from your

vehicle’s key and the ignition

switch while trying to start the

engine.

This immobilizer system complies

with the R & TTE (Radio equipment

and Telecommunications Terminal

Equipment and the mutual

recognition of their conformity)

Directives.

When you turn the ignition switch to

the ON (II) position, the immobilizer

system indicator should come on for

a few seconds, then go out. If the

indicator starts to blink, it means the

system does not recognize the

coding of the key. Turn the ignition

switch to the LOCK (0) position,

remove the key, reinsert it, and turn

the switch to the ON (II) position

again.

The system may not recognize your

key’s coding if another immobilizer

key or other metal object is near the

ignition switch when you insert the

key. To make sure the system

If the system repeatedly does not

recognize the coding of your key,

contact your dealer.

The immobilizer system indicator

will also blink several times when

you turn the ignition switch from the

ON (II) position to the ACCESSORY

(I) or the LOCK (0) position.

Do not attempt to alter this system

or add other devices to it. Electrical

problems could result that may make

112

Instruments and Controls

Downloaded from engine

07/09/12 09:25:47 32SAA650_116

Keys and Locks

Ignition Switch

LOCK (0) － You can insert or

remove the key only in this position.

To switch from the ACCESSORY (I)

to the LOCK (0) position, you must

push the key in slightly as you turn it.

If your vehicle has an automatic

transmission (CVT), the shift lever

must also be in Park. The anti-theft

lock will lock the steering column

when you remove the key.

Removing the key from the

ignition switch while driving

locks the steering. This can

cause you to lose control of

the vehicle.

Remove the key from the

ignition switch only when

parked.

If the front wheels are turned, the

anti-theft lock may sometimes make

it difficult to turn the key from the

LOCK (0) to the ACCESSORY (I)

position. Firmly turn the steering

wheel to the left or to the right as

you turn the key.

ACCESSORY (I) － In this position,

you can operate the audio system

(on some types), the cigarette lighter

and the accessory power socket.

The ignition switch is on the right

side of the steering column. It has

four positions:

• LOCK (0)

• ACCESSORY (I)

• ON (II)

ON (II) － This is the normal key

position when driving. All features

and accessories on the vehicle are

usable. Several of the indicators on

the instrument panel come on as a

test when you turn the ignition

• START (III)

switch from the ACCESSORY (I) to

the ON (II) position.

CONTINUED

113

Instruments and Controls

Downloaded from engine

07/09/12 09:25:55 32SAA650_117

Keys and Locks

START (III) － Use this position

only to start the engine. The switch

returns to the ON (II) position when

you let go of the key.

Door Locks

LOCK TAB

Unlock

The engine will not start if the

immobilizer system does not recog-

nize the key’s coding (see page 112 ).

On some types, you will hear a

Lock

reminder beeper if you leave the key

in the ignition switch in the LOCK

(0) or the ACCESSORY (I) position

and open the driver’s door. Remove

the key to turn off the beeper.

KEY

Each door has a lock tab on the top.

Push the tab down to lock the door

and pull it up to unlock.

The front doors can be locked and

unlocked from the outside with the

key.

To lock any passenger’s door when

getting out of the vehicle, push the

lock tab down and close the door. To

lock the driver’s door, pull the

outside door handle and push the

lock tab down. Release the handle,

then close the door.

114

Instruments and Controls

Downloaded from engine

07/09/12 09:26:04 32SAA650_118

Keys and Locks

Power Door Locks

(For some types)

MASTER DOOR LOCK BUTTON

LOCK TAB

Unlock

Lock

KEY

The driver’s door has a master door

lock button. Push the master door

lock button to lock all doors and the

tailgate. Push the button again to

unlock them.

Each door has a lock tab on the top.

When you push down or pull up the

lock tab on the driver’s door, all

doors and the tailgate lock or unlock.

The lock tab on each passenger’s

door only locks and unlocks that

door.

The front doors can be locked and

unlocked from the outside with the

key. All doors and the tailgate lock

or unlock when you use the key to

lock or unlock the driver’s door.

CONTINUED

115

Instruments and Controls

Downloaded from engine

07/09/12 09:26:12 32SAA650_119

Keys and Locks

Lockout Prevention

Super Locking

The super locking will not set if any

door or the tailgate is not fully closed.

It will be set even if the bonnet, any

window or the sunroof is open.

If you forget and leave the key in the

ignition switch, Lockout Prevention

will not allow you to lock the driver’s

door. With the driver’s door open

and the key in the ignition, the

master door lock switch (on some

types) is disabled. However, if the

driver’s door is not open, the master

door lock switch is not disabled. If

you try to lock an open driver’s door

by pushing down the lock tab, the

tabs on all doors pop out. Pushing

down the lock tab on the front

(For some types)

With the super locking set, the

master door lock switch on the

driver’s door and the lock tabs on all

doors are disabled.

If there are persons inside the

vehicle with the super

locking set, they cannot

unlock the door from the

inside.

passenger’s door only locks that door.

The super locking helps to protect

your vehicle and valuables from theft.

To set the super locking, turn the

key towards the front of the vehicle

twice within 5 seconds.

Make sure there is no person

inside the vehicle before

setting the super locking.

You can also set the super locking

with the tailgate lock. Turn the key

twice to lock within 5 seconds.

116

Instruments and Controls

Downloaded from engine

07/09/12 09:26:19 32SAA650_120

Keys and Locks

On some types, you can set the

super locking with the remote

transmitter. To set it, push the

LOCK button twice within 5 seconds

(see page 118 ).

Remote Transmitter

(For some types)

When you push the UNLOCK button,

all doors and the tailgate unlock. All

outside turn signals and both

indicators in the instrument panel

flash once each time you push the

button.

LOCK

BUTTON

To reset the super locking, unlock

the driver’s door or the tailgate with

the key or the remote transmitter.

UNLOCK

BUTTON

You can lock and unlock your vehicle

with the remote transmitter. When

you push the LOCK button, all doors

and the tailgate lock.

When you push the LOCK button on

the remote transmitter, all outside

turn signals and both indicators in

the instrument panel flash three

times to verify the doors and the

tailgate are locked.

CONTINUED

117

Instruments and Controls

Downloaded from engine

07/09/12 09:26:28 32SAA650_121

Keys and Locks

The ceiling light (if the ceiling light

switch is in the centre position) will

come on when you press the

UNLOCK button. If you do not open

any door or the tailgate, the light will

fade out in about 30 seconds. If you

relock the doors and the tailgate

with the remote transmitter before

30 seconds have elapsed, the light

will go off immediately.

Super Locking

(For some types)

The super locking helps to protect

your vehicle and valuables from theft.

To set the super locking, push the

LOCK button twice within 5 seconds.

If there are persons inside the

vehicle with the super

locking set, they cannot

unlock the door from the

inside.

The super locking will not set if any

door or the tailgate is not fully closed.

It will be set even if the bonnet, any

window or the sunroof is open.

Make sure there is no person

inside the vehicle before

setting the super locking.

If you unlock the doors and the

tailgate with the remote transmitter,

but do not open any door or the

tailgate within 30 seconds, all doors

and the tailgate automatically relock.

To reset the super locking, push the

UNLOCK button on the remote

transmitter, or unlock the driver’s

door with the key.

You cannot lock or unlock the doors

and the tailgate with the remote

transmitter if any door or the tailgate

is not fully closed or the key is in the

ignition switch.

See page 116 for information on the

super locking.

118

Instruments and Controls

Downloaded from engine

07/09/12 09:26:36 32SAA650_122

Keys and Locks

Replacing the Battery

When the remote transmitter’s

battery begins to get weak, it may

take several pushes on the button to

lock or unlock the doors and tailgate,

and the LED will not light. Replace

the battery as soon as possible.

BATTERY

Battery type: CR1616

SCREW

TAB

To replace the battery:

3. Inside the transmitter, separate

the inner cover from the keypad

by releasing the two tabs on the

cover.

1. Remove the screw at the base of

the transmitter with a small

Phillips-head screwdriver.

2. Separate the transmitter by prying

its middle seam with your

fingernail.

119

Instruments and Controls

Downloaded from engine

07/09/12 09:26:45 32SAA650_123

Keys and Locks

4. Remove the old battery from the

back of the inner cover, and note

the polarity. Make sure the

(EU models)

Transmitter Care

Avoid dropping or throwing the

transmitter.

EC Directives

This keyless entry system complies

with the R & TTE (Radio equipment

and Telecommunications Terminal

Equipment and the mutual

recognition of their conformity)

Directives.

polarity of the new battery is the

same (＋ side facing down), then

insert it into the back of the cover.

Protect the transmitter from

extreme temperature.

This symbol on the battery

means that this product must

not be treated as household

waste.

Do not immerse the transmitter in

any liquid.

If you lose a transmitter, the

replacement needs to be

reprogrammed by your dealer.

An improperly disposed of battery

can be harmful to the environment

and human health.

Always confirm local regulations for

battery disposal.

5. Install the parts in reverse order.

120

Instruments and Controls

Downloaded from engine

07/09/12 09:26:54 32SAA650_124

Keys and Locks

Childproof Door Locks

Tailgate

For some types

The tailgate will also lock or unlock

when you lock or unlock the driver’s

door by using the lock tab, the key,

or the master door lock switch.

On vehicles with remote

transmitters, the tailgate will also

lock or unlock when you lock or

unlock the doors with the

transmitter.

LEVER

When you lock the doors and the

tailgate with the remote transmitter,

all outside turn signals and both

indicators in the instrument panel

flash three times to verify the doors

and the tailgate are locked. When

you unlock them, the lights flash

once.

KEY

The childproof door locks are

designed to prevent children seated

in the rear from accidentally opening

the rear doors. Each rear door has a

lock lever near the edge. With the

lever in the LOCK position, the door

cannot be opened from the inside

regardless of the position of the lock

tab. To open the door, pull the lock

tab up and use the outside door

handle.

For some types

Use the key to lock or unlock the

tailgate lock.

CONTINUED

121

Instruments and Controls

Downloaded from engine

07/09/12 09:27:02 32SAA650_125

Keys and Locks

COVER

TAILGATE

HANDLE

To open the tailgate, pull the handle,

then lift up the tailgate.

To close the tailgate, hold the

On vehicles with remote transmitter

tailgate handle and lower the tailgate, If the power door lock system cannot

then press down on the back edge.

unlock the tailgate, unlock it

manually.

See page 241 for the information on

luggage loading. Keep the tailgate

closed at all times while driving to

avoid damaging the tailgate, and to

prevent exhaust gas from getting

into the interior. See Carbon

1. Place a cloth on the edge of the

cover, then use a small flat-tipped

screwdriver to remove the cover

on the back of the tailgate.

Monoxide Hazard on page 79 .

122

Instruments and Controls

Downloaded from engine

07/09/12 09:27:09 32SAA650_126

Keys and Locks

Glove Box

COVER

An open glove box can cause

serious injury to your

passenger in a crash, even if

the passenger is wearing the

seat belt.

Always keep the glove box

closed while driving.

GLOVE BOX

LEVER

2. Turn the inside lever right to

unlock the tailgate.

Open the glove box by pushing the

handle. Close it with a firm push.

If you need to unlock the tailgate

manually, it means there is a

problem with the tailgate. Have the

vehicle checked by your dealer.

123

Instruments and Controls

Downloaded from engine

Instruments and Controls -> Keys and Locks for Your Honda Jazz 4 Door Second Generation (2009-2015)

Related Topics

Popular Owner Manuals

Latest Owner Manuals