6
DO-IT-YOURSELF MAINTENANCE
19
G110B04A-AAT
Recommended Fluid
Your Hyundai automatic transaxle is
specially designed to operate with
Hyundai Genuine ATF SP-III, DIA-
MOND ATF SP-III, SK ATF SP-III or
other brands approved by Hyundai
Motor Co., Damage caused by a
nonspecified fluid is not covered by
your new vehicle limited warranty.
!
G110D03O-GAT
Checking the Automatic
Transaxle Fluid Level
G110C01JM-GAT
Transaxle Fluid Capacity
The fluid capacity of the automatic
transaxle is 7.8 liters (8.2 U.S. quarts).
WARNING:
The transaxle fluid level should be
checked when the engine is at
normal operating temperature. This
means that the engine, radiator,
exhaust system etc., are very hot.
Exercise great care not to burn
yourself during this procedure.
The automatic transaxle fluid level
should be checked regularly.
Keep the vehicle on the level ground
with the parking brake applied and
check the fluid level according to the
following procedure.
1. Place the shift lever in N (Neutral)
position and confirm the engine is
running at normal idle speed.
2. After the transaxle is warmed up
sufficiently (fluid temperature
70~80°C (158~176°F)), for example
by 10 minutes usual driving, move
the shift lever through all positions
then place the shift lever in N (Neu-
tral) or P (Park) position.
HJM5011
HJM5044
3. Confirm if the fluid level is in “HOT”
range on the level gauge. If the fluid
level is lower, add the specified fluid
from the fill hole. If the fluid level is
higher, drain the fluid from the drain
hole.
OVQ056002
Type B
Type A
HOT
COLD
HOT
COLD
English 
