6
DO-IT-YOURSELF MAINTENANCE
35
REPLACEMENT OF LIGHT
BULBS
G260A03A-GAT
Before attempting to replace a light
bulb, be sure the switch is turned to
the "OFF" position.
The next paragraph shows how to
reach the light bulbs so they may be
changed. Be sure to replace the
burned-out bulb with one of the same
number and wattage rating.
See page 6-41 for the wattage descrip-
tions.
CAUTION:
o Keep the lamps out of contact
with petroleum products, such as
oil, gasoline, etc.
o After heavy, driving rain or wash-
ing, headlight and taillight lenses
could appear frosty. This condi-
tion is caused by the temperature
difference between the lamp in-
side and outside. This is similar
to the condensation on your win-
dows inside your vehicle during
the rain and doesn’t indicate a
problem with your vehicle. If the
water leaks into the lamp bulb
circuitry, have the vehicle checked
by an Authorized Hyundai Dealer.
!
SPECIFICATION:
"H"
Horizontal center line of headlights
from ground : 904 mm (35.6 in.)
"W"
Distance between each headlight
center : 1,356 mm (53.4 in.)
"L"
Distance between the headlights
and the wall that the lights are
tested against :
3,000 mm (118.1 in.)
4. Using a spanner, remove the head-
light assembly mounting bolts.
G270A01O-GAT
Headlight and Front Turn Signal
Light
1. Allow the bulb to cool. Wear eye
protection.
2. Open the engine hood.
3. Always grasp the bulb by its plas-
tic base, avoid touching the glass.
HJM5012
English 
