2016-2019 Hyundai Tucson SUV Maintenance -> Explanation of scheduled maintenance items User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Explanation of scheduled maintenance items for Your Hyundai Tucson SUV Third Generation (2016-2019)

Maintenance  
EXPLANATIOON OF SCHEDUULLED MAINTENNANCE ITEMS  
Engine oil and filter  
Fuel filter (cartridge)  
WARNING  
The engine oil and filter should be A clogged-up fuel filter may limit the  
changed at the intervals specified in vehicle driving speed, damage the  
the maintenance schedule. If the car emission system, and cause the  
is being driven in severe conditions, hard starting. When a considerable  
more frequent oil and filter changes amount of foreign substances are  
Diesel Engine  
Never manipulate or modify the  
injection system while running  
the diesel engine or within 30  
seconds after turning OFF the  
diesel engine. The high-pressure  
pump, high-pressure pipes, rail,  
and injectors are still subject to  
the high pressure right after  
stopping the diesel engine.When  
the fuel leakage vents out, it may  
cause serious body injury. Any  
people, who are implemented  
with the artificial cardiac pace-  
maker, should remain away from  
the ECU or the wiring harness by  
at least 30 cm while running the  
diesel engine. The high currents  
of the common rail system pro-  
duce a considerable amount of  
magnetic fields.  
are required.  
accumulated in the fuel tank, the fuel  
filter should be replaced.  
Drive belts  
Upon installing a new fuel filter, oper-  
ate the diesel engine for several min-  
utes, and check the connections for  
any leakages. We recommend you to  
have the fuel filter replaced by an  
authorized HYUNDAI dealer.  
Inspect all drive belts for evidence of  
cuts, cracks, excessive wear or oil  
saturation and replace if necessary.  
Drive belts should be checked peri-  
odically for proper tension and  
adjusted as necessary.  
Fuel lines, fuel hoses and con-  
nections  
CAUTION  
Check the fuel lines, fuel hoses and  
connections for leakage and dam-  
age. We recommend that the fuel  
lines, fuel hoses and connections be  
replaced by an authorized HYUNDAI  
dealer.  
When you are inspecting the belt,  
place the ignition switch to the  
LOCK/OFF or ACC position.  
7-24  
Vapor hose and fuel filler cap  
Vacuum crankcase ventilation  
hoses (if equipped)  
Air cleaner filter  
The vapor hose and fuel filler cap  
should be inspected at those inter-  
vals specified in the maintenance  
schedule. Make sure that a new  
vapor hose or fuel filler cap is cor-  
rectly replaced.  
We recommend that the air cleaner  
filter be replaced by an authorized  
HYUNDAI dealer.  
Inspect the surface of hoses for evi-  
dence of heat and/or mechanical  
damage. Hard and brittle rubber,  
cracking, tears, cuts, abrasions, and  
excessive swelling indicate deterio-  
ration. Particular attention should be  
Spark plugs  
(For Gasoline Engine)  
paid to examine those hose surfaces Make sure to install new spark plugs  
nearest to high heat sources, such of the correct heat range.  
as the exhaust manifold.  
Inspect the hose routing to assure  
that the hoses do not come in con-  
WARNING  
tact with any heat source, sharp  
edges or moving component which  
might cause heat damage or  
Do not disconnect and inspect  
spark plugs when the engine is  
hot.You may burn yourself.  
mechanical wear. Inspect all hose  
connections, such as clamps and  
couplings, to make sure they are  
secure, and that no leaks are pres-  
ent. Hoses should be replaced  
Valve clearance  
(For Gasoline Engine)  
7
Inspect excessive valve noise and/or  
immediately if there is any evidence  
of deterioration or damage.  
engine vibration and adjust if neces-  
sary. We recommend that the system  
be serviced by an authorized HYUNDAI  
dealer.  
7-25  
Maintenance  
Cooling system  
Automatic transaxle fluid  
Manual transaxle fluid  
(if equipped)  
Check the cooling system parts, Automatic transaxle fluid should not  
such as radiator, coolant reservoir, be checked under normal usage  
hoses and connections for leakage conditions.  
and damage. Replace any damaged  
parts.  
Inspect the manual transaxle fluid  
according to the maintenance sched-  
ule.  
We recommend that the automatic  
transaxle fluid changed by an author-  
ized HYUNDAI dealer according to  
the maintenance schedule.  
Dual clutch transmission fluid  
(if equipped)  
Engine coolant  
The coolant should be changed at  
the intervals specified in the mainte-  
nance schedule.  
Inspect the dual clutch transmission  
fluid according to the maintenance  
schedule.  
i
Information  
Automatic transaxle fluid color is basi-  
cally red.  
As the vehicle is driven, the automatic  
transaxle fluid will begin to look darker.  
It is normal condition and you should  
not judge the need to replace the fluid  
based upon the changed color.  
NOTICE  
The use of a non-specified fluid  
could result in transaxle malfunc-  
tion and failure.  
Use only specified automatic  
transaxle fluid.  
(Refer to “Recommended lubri-  
cants and capacities” in chapter 8.)  
7-26  
Brake hoses and lines  
Brake pads, calipers and  
rotors  
Steering gear box, linkage &  
boots/lower arm ball joint  
Visually check for proper installation,  
chafing, cracks, deterioration and  
any leakage. Replace any deteriorat-  
ed or damaged parts immediately.  
Check the pads for excessive wear, With the vehicle stopped and engine  
discs for run out and wear, and off, check for excessive free-play in  
calipers for fluid leakage.  
the steering wheel.  
For more information on checking Check the linkage for bends or dam-  
the pads or lining wear limit, refer to age. Check the dust boots and ball  
Brake/Clutch fluid  
(if equipped)  
the HYUNDAI web site.  
joints for deterioration, cracks, or  
damage. Replace any damaged  
parts.  
Check brake fluid level in the brake  
fluid reservoir. The level should be  
between “MIN” and “MAX” marks on  
the side of the reservoir. Use only  
hydraulic brake fluid conforming to  
DOT 3 or DOT 4 specification.  
Suspension mounting bolts  
Drive shafts and boots  
Check the suspension connections  
for looseness or damage. Retighten  
to the specified torque.  
Check the drive shafts, boots and  
clamps for cracks, deterioration, or  
damage. Replace any damaged  
parts and, if necessary, repack the  
grease.  
Parking brake  
Inspect the parking brake system  
including the parking brake lever and  
cables.  
Air conditioning refrigerant/  
compressor  
7
Check the air conditioning lines and  
connections for leakage and dam-  
age.  
7-27  

Related Topics

Popular Owner Manuals