2016-2019 Hyundai Tucson SUV Maintenance -> Wiper blades User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Wiper blades for Your Hyundai Tucson SUV Third Generation (2016-2019)

WIPER BLADES  
Contamination of either the wind-  
shield or the wiper blades with for-  
eign matter can reduce the effective-  
ness of the windshield wipers.  
Blade inspection  
Blade replacement  
When the wipers no longer clean  
adequately, the blades may be worn  
or cracked, and require replacement.  
Common sources of contamination  
are insects, tree sap, and hot wax  
treatments used by some commer-  
cial car washes. If the blades are not  
wiping properly, clean both the win-  
dow and the blades with a good  
cleaner or mild detergent, and rinse  
thoroughly with clean water.  
NOTICE  
To prevent damage to the wiper arms  
or other components, do not attempt  
to move the wipers manually.  
NOTICE  
OLMB073019  
The use of a non-specified wiper  
blade could result in wiper mal-  
function and failure.  
NOTICE  
i
Information  
To prevent damage to the wiper  
blades, do not use gasoline,  
kerosene, paint thinner, or other  
solvents on or near them.  
Commercial hot waxes applied by  
automatic car washes have been  
known to make the windshield diffi-  
cult to clean.  
CAUTION  
Do not allow the wiper arm to fall  
against the windshield, since it  
may chip or crack the windshield.  
7
i
Information  
Wiper blades are consumable item and  
normal wear of the wipers may not be  
covered by your vehicle warranty.  
7-41  
Maintenance  
Front windshield wiper blade  
OLF074018  
OLF074019  
2. Lift up the wiper blade clip. Then 3. Install the new blade assembly in  
pull down the blade assembly and  
remove it.  
OLF074017  
the reverse order of removal.  
1. Raise the wiper arm.  
4. Return the wiper arm on the wind-  
shield.  
7-42  
Rear window wiper blade  
OTL075051  
2. Install the new blade assembly by  
inserting the center part into the  
slot in the wiper arm until it clicks  
into place.  
OTL075050  
1. Raise the wiper arm and pull out  
the wiper blade assembly.  
3. Make sure the blade assembly is  
installed firmly by trying to pull it  
slightly.  
To prevent damage to the wiper arms  
or other components, we recommend  
that the wiper blade be replaced by an  
authorized HYUNDAI dealer.  
7
7-43  

Related Topics

Popular Owner Manuals