2019-2026 Kia Picanto 4 Door Driver assistance guide -> Manual Speed Limit Assist (MSLA) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver assistance guide -> Manual Speed Limit Assist (MSLA) for Your Kia Picanto 4 Door Third Generation (2019-2026)

Driver assistance guideManual Speed Limit Assist (MSLA)Manual Speed Limit AssistWARNING(MSLA)僅 Safe Exit Warning may not operatenormally if interfered by strong elec-tromagnetic waves.僅 Safe Exit Warning may not operate forapproximately 3 seconds after thevehicle is restarted, or the rear cornerradars are initialized.僅 Even after starting the vehicle again,OJAPE053089Safe Exit Warning not function prop-1 Speed Limit indicatorerly when the obstruction or malfunc-2 Set speedtion condition can set the speed limit when you donot want to drive over a specific you drive over the preset speed limit,Manual Speed Limit Assist operates (setspeed limit will blink and chime willsound) until the vehicle speed returnswithin the speed Speed Limit Assist opera-tionSetting speed limit61. Press and hold Driving Assist ( ) but-ton at the desired speed. The SpeedLimit () indicator will appearon the 0530072. Push the (+) switch up or (-) switchdown, and release it at the the (+) switch up or (-) switchdown and hold it. The speed willincrease or decrease to the nearestmultiple of 10 (multiple of 5 in mph) atfirst, and then increase or decrease by10 km/h (5 mph).643
Driver assistance guide
Manual Speed Limit Assist (MSLA)
Manual Speed Limit Assist
WARNING
(MSLA)
僅 Safe Exit Warning may not operate
normally if interfered by strong elec-
tromagnetic waves.
僅 Safe Exit Warning may not operate for
approximately 3 seconds after the
vehicle is restarted, or the rear corner
radars are initialized.
僅 Even after starting the vehicle again,
OJAPE053089
Safe Exit Warning not function prop-
1 Speed Limit indicator
erly when the obstruction or malfunc-
2 Set speed
tion condition persists.
You can set the speed limit when you do
not want to drive over a specific speed.
If you drive over the preset speed limit,
Manual Speed Limit Assist operates (set
speed limit will blink and chime will
sound) until the vehicle speed returns
within the speed limit.
Manual Speed Limit Assist opera-
tion
Setting speed limit
6
1. Press and hold Driving Assist ( ) but-
ton at the desired speed. The Speed
Limit (
) indicator will appear
on the cluster.
OJAPE053007
2. Push the (+) switch up or (-) switch
down, and release it at the desired
speed.
Push the (+) switch up or (-) switch
down and hold it. The speed will
increase or decrease to the nearest
multiple of 10 (multiple of 5 in mph) at
first, and then increase or decrease by
10 km/h (5 mph).
6
43
Driver assistance guideManual Speed Limit Assist (MSLA)Resuming Manual Speed LimitAssistOJAPE0530083. The set speed limit will be displayedon the 053010_3If you would like to drive over the pre-To resume Manual Speed Limit Assistset speed limit, depress the accelera-after the function was paused, operatetor (+), (-), ( ) set speed limit will blink andIf you push the (+) switch up or (–)chime will sound until you return theswitch down, vehicle speed will be set tovehicle speed within the speed current speed on the you press the ( ) switch, vehiclespeed will resume to the preset off Manual Speed LimitAssistOJAPE053090NOTICEWhen the accelerator pedal is notdepressed beyond the pressure point,vehicle speed will maintain within theOJAPE053007Press the Driving Assist ( ) button tospeed Manual Speed Limit Assist off. TheSpeed Limit () indicator will goTemporarily pausing Limit AssistWARNINGTake the following precautions whenusing Manual Speed Limit Assist:僅 Always set the vehicle speed underthe speed limit in your country.僅 Keep Manual Speed Limit Assist offOJAPE053009when the function is not in use, toPress the ( ) switch to temporarilyavoid inadvertently setting a the set speed limit. The set speedCheck that the Speed Limit ()limit will turn off but the Speed Limitindicator is off.() indicator will stay on.644
Driver assistance guide
Manual Speed Limit Assist (MSLA)
Resuming Manual Speed Limit
Assist
OJAPE053008
3. The set speed limit will be displayed
on the cluster.
OJAPE053010_3
If you would like to drive over the pre-
To resume Manual Speed Limit Assist
set speed limit, depress the accelera-
after the function was paused, operate
tor pedal.
the (+), (-), ( ) switch.
The set speed limit will blink and
If you push the (+) switch up or (–)
chime will sound until you return the
switch down, vehicle speed will be set to
vehicle speed within the speed limit.
the current speed on the cluster.
If you press the ( ) switch, vehicle
speed will resume to the preset speed.
Turning off Manual Speed Limit
Assist
OJAPE053090
NOTICE
When the accelerator pedal is not
depressed beyond the pressure point,
vehicle speed will maintain within the
OJAPE053007
Press the Driving Assist ( ) button to
speed limit.
turn Manual Speed Limit Assist off. The
Speed Limit (
) indicator will go
Temporarily pausing Manual
off.
Speed Limit Assist
WARNING
Take the following precautions when
using Manual Speed Limit Assist:
僅 Always set the vehicle speed under
the speed limit in your country.
僅 Keep Manual Speed Limit Assist off
OJAPE053009
when the function is not in use, to
Press the ( ) switch to temporarily
avoid inadvertently setting a speed.
pause the set speed limit. The set speed
Check that the Speed Limit (
)
limit will turn off but the Speed Limit
indicator is off.
(
) indicator will stay on.
6
44

Related Topics

Driver assistance guide
Forward Collision-Avoidance Assist (FCA) (Front Camera Only) Forward Collision-Avoidance Assist (FCA) (Sensor Fusion) Lane Keeping Assist (LKA) Blind-Spot Collision-Avoidance Assist (BCA) Safe Exit Warning (SEW) Intelligent Speed Limit Assist (ISLA) Driver Attention Warning (DAW) Cruise Control (CC) Lane Following Assist (LFA) Rear View Monitor (RVM) Rear Cross-Traffic Collision-Avoidance Assist (RCCA) Reverse Parking Distance Warning (PDW) Declaration of conformity

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot