2019-2026 Kia Picanto 4 Door Maintenance -> Changing the coolant User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Changing the coolant for Your Kia Picanto 4 Door Third Generation (2019-2026)

MaintenanceChanging the coolantChanging the coolantBrake/clutch fluid (ifequipped)Have the coolant replaced by a profes-sional workshop. Kia recommends toChecking the brake/clutch fluidvisit an authorised Kia dealer/servicelevelpartner.(Petrol) 1.0 MPI/1.0 FFV/1.2 MPICAUTIONPut a thick cloth around the radiator capbefore refilling the coolant in order toprevent the coolant from overflowinginto engine parts such as the 僅 Do not use radiator coolant or anti-freeze in the washer fluid reservoir.僅 Radiator coolant can severely obscureOJA070016Rvisibility when sprayed on theSmartstream G1.0/Smartstream G1.2windscreen and may cause loss ofvehicle control or damage the paintand body trim.8OJA070165RCheck the fluid level in the reservoirperiodically. The fluid level should bebetween MAX and MIN marks on theside of the removing the reservoir cap andadding brake/clutch fluid, clean the areaaround the reservoir cap thoroughly toprevent brake/clutchfluid the level is low, add fluid to level will fall with accumulatedmileage. This is a nor-mal condition831
Maintenance
Changing the coolant
Changing the coolant
Brake/clutch fluid (if
equipped)
Have the coolant replaced by a profes-
sional workshop. Kia recommends to
Checking the brake/clutch fluid
visit an authorised Kia dealer/service
level
partner.
(Petrol) 1.0 MPI/1.0 FFV/1.2 MPI
CAUTION
Put a thick cloth around the radiator cap
before refilling the coolant in order to
prevent the coolant from overflowing
into engine parts such as the alternator.
WARNING
Coolant
僅 Do not use radiator coolant or anti-
freeze in the washer fluid reservoir.
僅 Radiator coolant can severely obscure
OJA070016R
visibility when sprayed on the
Smartstream G1.0/Smartstream G1.2
windscreen and may cause loss of
vehicle control or damage the paint
and body trim.
8
OJA070165R
Check the fluid level in the reservoir
periodically. The fluid level should be
between MAX and MIN marks on the
side of the reservoir.
Before removing the reservoir cap and
adding brake/clutch fluid, clean the area
around the reservoir cap thoroughly to
prevent brake/clutchfluid contamination.
If the level is low, add fluid to theMAX
level will fall with accumulated
mileage. This is a nor-mal condition
8
31

Related Topics

Popular Owner Manuals