Get Features of your vehicle Guide for Kia Sportage SUV Fifth Generation (2022-2026)

Features of your vehicle

Keys

Battery replacement

Features of your vehicle

The smart key uses a 3 volt lithium bat

tery which will normally last for several

years, but may last less.

-

Keys

WARNING

Never leave a vehicle key in your vehicle

with unsupervised children. Children

copy adults and play with items in a

vehicle. They could use the key to turn

the vehicle on, operate power windows

or other controls, or even make the vehi

cle move, which could result in serious

bodily injury or death.

-

OCV041005L

If you are unsure how to use or replace

the battery, contact an authorized Kia

dealer.

1. Detach mechanical key from your

remote key or smart key.

Record your key number

The key code number

is stamped on the key

2. Pry open the key cover.

3. Replace the remote key or smart key

cover with a new battery. (CR2032)

When replacing the battery, make

sure the battery position is correct.

code tag attached to

the key set. Should

you lose your keys, this number will

enable an authorized Kia dealer to dupli

cate the keys easily. Remove the key

code tag and store it in a safe place.

Also, record the key code number and

keep it in a safe and handy place, but

not in the vehicle.

-

4. Install the battery in the reverse order

of removal.

For remote key or smart key replace

-

ment, visit an authorized Kia dealer.

The remote key or smart key is designed

to give you years of trouble-free use,

however it can malfunction if exposed to

moisture or static electricity. If you are

WARNING

Aftermarket keys

Use only Kia original parts for the igni

-

unsure how to use or replace the bat

-

tion key in your vehicle. If an aftermarket

key is used, the ignition switch or

ENGINE START/STOP button may not

tery, contact an authorized Kia dealer.

Using the wrong battery can cause

smart key to malfunction. Be sure to use

the correct battery.

return to ON after START. If this hap

-

pens, the starter will continue to operate

causing possible fire due to excessive

current in the wiring.

An inappropriately disposed

battery can be harmful to the

environment and human

health. Dispose the battery

according to your local law(s) or regula

-

tion.

4

6

Features of your vehicle

Keys

cause undesired operation of the

device.

WARNING

THIS PRODUCT CONTAINS A BUT

TON BATTERY

-

3. Changes or modifications not

expressly approved by the party

responsible for compliance could void

the user's authority to operate the

device.

If swallowed, a lithium button battery

can cause severe or fatal injuries within

2 hours.

Keep batteries out of reach of children.

NOTICE

If you think batteries may have been

swallowed or placed inside any part of

the body, seek immediate medical atten

tion.

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user's author

-

ity to operate the equipment. If the

smart key is inoperative due to changes

or modifications not expressly approved

by the party responsible for compliance,

CAUTION

Remote key or smart key damage

4

The remote key or smart key can mal

-

it will not be covered by your manufac

-

function if dropped, exposed to mois

ture, static electricity, heat or direct

sunlight.

-

turer's vehicle warranty.

Using the remote key (if

equipped)

WARNING

IC WARNING

Type A

This device complies with Industry Can

-

ada licence-exempt RSS standard(s).

1. This device may not cause interfer

ence, and

-

2. This device must accept any interfer

ONQ5031525N

ence, including interference that may

cause undesired operation of the

device.

Type B

This device complies with Indus

try Canada licence-exempt RSS

standard(s).

-

ONQ5031065

Operation is subject to the following

conditions:

1. This device may not cause interfer

-

ence, and

2. This device must accept any interfer

-

ence, including interference that may

4

7

Features of your vehicle

Keys

ard warning lights will blink twice to indi

-

Smart key (if equipped)

cate that the driver's door is unlocked.

With a smart key, you can lock or unlock

a door and even start the engine without

inserting the key.

All doors are unlocked if the unlock but

-

ton is pressed once more within 4 sec

onds. The hazard warning lights will

blink and the chime will sound twice

again to indicate that all doors are

-

Type A

unlocked. After pressing this button, the

doors will lock automatically unless you

open any door within 30 seconds.

If you attempt to lock or unlock the door

by pressing the door lock/unlock button

in any of the following states, the door

will not be locked or unlocked.

ONQ5031511N

Type B

僅 When you want to lock or unlock the

door in the ACC or ON state.

僅 When you want to lock a door in a car

with one or more doors open.

Depending on the vehicle, the driver can

turn off or set the 2-press unlock setting

function. For more information, refer to

"User settings mode" on page 4-71.

ONQ5031066

Lock (1)

All doors are locked if the lock button is

NOTICE

pressed. If all doors are closed, the haz

-

If the smart key is inoperative due to

exposure to water or liquids, it will not be

covered by your manufacturer's vehicle

warranty.

ard warning lights will blink and the

chime will sound once to indicate that all

doors are locked.

Also, if the lock button is pressed once

more within 4 seconds, the hazard warn

ing lights will blink and the chime will

sound once to confirm that the door is

locked.

-

Liftgate open (3)

The liftgate is opened if the button is

pressed for more than 1 second.

However, if any door remains open, the

hazard warning lights (and/or the chime)

will not operate. But if all doors are

Panic alarm (4)

closed after the lock button is pressed,

the hazard warning lights will blink once.

The horn sounds and the hazard warn

-

ing lights blink for about 30 seconds if

this button is pressed for more than 0.5

seconds. To stop the horn and lights,

press any button on the transmitter.

Unlock (2)

The driver's door is unlocked if the

unlock button is pressed once. The haz

-

4

8

Features of your vehicle

Keys

To reinstall the mechanical key, put the

Remote start (5) (if equipped)

key into the hole and push it until a

"click" sound is heard.

You can start the vehicle using the

remote start button (5) of the smart key.

To start the vehicle remotely:

Smart key precautions

僅 Lock the doors by pressing the door

lock button (1) within 10 m (32 ft.) dis

tance from the vehicle.

-

The smart key may not work if any of

the following occur:

僅 Press the remote start button for over

僅 The smart key is close to a radio

transmitter such as a radio station or

an airport which can interfere with

normal operation of the smart key.

2 seconds within 4 seconds after lock

-

ing the doors.

Press the remote start button once to

turn off the vehicle.

僅 The smart key is near a mobile two-

way radio system or a cellular phone.

If no further action for operating/driving

the vehicle is taken, the vehicle will be

turned off 10 minutes after starting the

vehicle remotely.

僅 Another vehicle's smart key is being

operated close to your vehicle.

4

When the smart key does not work cor

-

While remote starting, the hazard warn

-

rectly, open and close the door with the

ing lights blink 3 times. If you want to

mechanical key and contact an autho

-

stop the engine, press the Remote Start

button (5) again.

rized Kia dealer.

If the smart key is in close proximity to

your cell phone or smart phone, the sig

-

nal from the smart key could be blocked

by normal operation of your cell phone

or smart phone. This is especially

important when the phone is active,

such as when making calls, receiving

calls, text messaging, and/or sending/

receiving emails. Avoid placing the smart

key and your cell phone or smart phone

in the same pants or jacket pocket and

maintain adequate distance between the

two devices.

Start-up

You can start the vehicle without insert

ing the key.

-

* For more information, refer to "ENGINE

START/STOP button (if equipped)" on

page 5-8.

Mechanical key

If the smart key does not operate nor

mally, you can lock or unlock the door

by using the mechanical key.

-

CAUTION

Transmitter

Keep the transmitter away from water or

any liquid, as it can become damaged

and not function properly.

OCV041004L

To remove the mechanical key, press

and hold the release button (1) and

remove the mechanical key (2).

4

9

Features of your vehicle

Keys

that could interfere with the operation of

the aircraft.

NOTICE

僅 Loss of the smart key

A maximum of 2 smart keys can be

registered to a single vehicle.

If you happen to lose your smart key,

you will not be able to start the vehi

-

cle. You should immediately take the

vehicle and remaining key to your

authorized Kia dealer (tow the vehicle,

if necessary) to protect it from poten

-

tial theft.

僅 If the smart key is inoperative due to

exposure to water or liquids, it will not

be covered by your manufacturer's

vehicle warranty.

僅 To prevent the electronic key from

becoming damaged by magnetic

fields, do not leave it near the follow

-

ing electrical appliances:

- TVs

- Personal computers

- Cellular phones, cordless phones

and battery chargers

- Table lamps

- Induction cookers

僅 If you have to leave the vehicle's key

with a parking attendant, remove the

mechanical key for your own use and

provide the attendant with the elec

-

tronic key only.

CAUTION

When bringing a smart key onto an air

-

plane, make sure you do not press any

button on the key while inside the cabin.

If you are carrying the key in your bag

etc., make sure that the buttons cannot

be pressed accidentally. If you press a

button, the key may emit radio waves

4

10

Features of your vehicle

Immobilizer system

be kept confidential. Do not leave this

number anywhere in your vehicle.

Immobilizer system

Folding key immobilizer system

Your immobilizer system is comprised of

a small transponder in the ignition key

and electronic devices inside the vehicle.

NOTICE

僅 Do not put metal accessories near the

ignition switch.

With the immobilizer system, whenever

僅 Metal accessories may interrupt the

transponder signal and may prevent

the engine from being started.

you insert your ignition key into the igni

tion switch and turn it to ON, it checks

and determines and verifies that the

ignition key is valid.

-

If the key is determined to be valid, the

engine will start.

NOTICE

If you need additional keys or lose your

keys, consult an authorized Kia dealer.

If the key is determined to be invalid, the

engine will not start.

4

CAUTION

Deactivating the Folding Key

Immobilizer system

Immobilizer damage

Do not expose your immobilizer system

to moisture, static electricity or rough

handling. This may damage your immo

Insert the ignition key into the key cylin

der and turn it to the ON position.

-

bilizer.

Activating the Folding Key Immo

bilizer system

-

CAUTION

Turn the ignition key to the OFF position.

The immobilizer system activates auto

matically. Without a valid ignition key for

your vehicle, the engine will not start.

Immobilizer alterations

-

Do not change, alter or adjust the immo

bilizer system because it could cause the

immobilizer system to malfunction.

-

Your Immobilizer password is a cus

-

tomer unique password and should be

kept confidential. Do not leave this num

ber anywhere in your vehicle.

Smart key immobilizer system

-

The immobilizer system protects your

vehicle from theft. If an improperly

coded key (or other device) is used, the

vehicle's power system is disabled.

NOTICE

Keep each key separately in order to

avoid a starting malfunction.

When the ENGINE START/STOP button

is placed in the ON position, the immobi

lizer system indicator should come on

briefly, then go off. If the indicator starts

to blink, the system does not recognize

the coding of the key.

-

NOTICE

In order to prevent theft of your vehicle,

do not leave spare keys anywhere in

your vehicle. Your immobilizer password

is a customer unique password should

Place the ENGINE START/STOP button

in the OFF position, then place the

4

11

Features of your vehicle

Immobilizer system

ENGINE START/STOP button in the ON

position again.

NOTICE

If you need additional keys or lose your

keys, contact an authorized Kia dealer.

In some circumstances, the vehicle may

not recognize your smart key if another

smart key device is nearby or a metal

object such as a key chain is causing

interference with the smart key.

This device complies with Indus

try Canada licence-exempt RSS

standard(s).

-

If this occurs, your vehicle may not start.

Remove any metal objects or additional

Operation is subject to the following two

conditions:

keys near the smart key before attempt

ing to start the vehicle again.

-

1. This device may not cause interfer

ence, and

-

If the system repeatedly does not recog

nize the coding of the key, contact your

Kia dealer.

-

2. This device must accept any interfer

-

ence, including interference that may

cause undesired operation of the

device.

Do not attempt to alter this system or

add other devices to it. Electrical prob

lems could result that may make your

vehicle inoperable.

-

NOTICE

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user's author

ity to operate the equipment. If the

smart key is inoperative due to changes

or modifications not expressly approved

by the party responsible for compliance,

Deactivating the Smart Key

Immobilizer system

-

Change the ENGINE START/STOP but

ton to the ON position.

-

Activating the Smart Key Immo

bilizer system

-

it will not be covered by your manufac

-

turer's vehicle warranty.

Change the ENGINE START/STOP but

ton to the OFF position. The immobilizer

system activates automatically. Without

a valid smart key for your vehicle, the

engine will not start.

Limp home (override) procedure

(if equipped)

When you turn the ignition switch to the

ON position, if the immobilizer indicator

NOTICE

(

) goes off after blinking 5 times,

your transponder equipped in the igni

tion key is out of order. You cannot start

When starting the vehicle, do not use the

key with other immobilizer keys around.

Otherwise, the vehicle may not start or

may stop soon after it starts. Keep each

key separate in order to avoid a starting

malfunction.

-

the engine without the limp home proce

dure. To start the engine, you have to

-

input your password by using the igni

-

tion switch. Your password is only avail

-

able from an authorized Kia dealership.

Contact an authorized dealer for more

information.

4

12

Features of your vehicle

Theft-alarm system

The following procedure is how to input

your password:

Theft-alarm system

This system is designed to provide pro

-

1. Turn the ignition switch to the ON

position. The immobilizer indicator

tection from unauthorized entry into the

vehicle.

(

) will blink 5 times and go off

This system is operated in three stages:

indicating the beginning of the limp

home procedure.

1

Armed stage

2

3

Theft-alarm stage

Disarmed stage

2. Turn the ignition switch to the ACC

position.

3. To enter the first digit (in this example

"2"), turn the ignition switch to the ON

and ACC position twice. Perform the

same procedure for the next digits

between 3 seconds and 10 seconds

(for example, for "3", turn the ignition

ON and ACC 3 times).

4

4. If all of the digits have been input suc

cessfully, you have to start the engine

within 30 seconds. If you attempt to

start the engine after 30 seconds, the

engine will not start and you will have

to input your password again.

-

If triggered, the system provides an

audible alarm with blinking of the haz

ard warning lights.

-

After performing the limp home proce

-

dure, you have to see an authorized Kia

dealer immediately to inspect and repair

your ignition key or immobilizer system.

CAUTION

Do not attempt to alter this system or

add other devices to it.

Armed stage

Using the smart key

Park the vehicle and stop the engine.

Arm the system as described below.

1. Turn off the engine.

2. Make sure that all doors, the hood

and liftgate are closed and latched.

3. Lock the doors by pressing the button

of the front outside door handle with

the smart key in your possession.

After completion of the steps above,

the hazard warning lights will operate

once to indicate that the system is

4

13

Features of your vehicle

Theft-alarm system

armed. If any door (or liftgate) or hood

remains open, the hazard warning

lights and the chime will not operate

and the theft-alarm will not arm. If all

doors and liftgate and hood are

closed after the lock button is

Theft-alarm stage

The alarm will be activated if any of the

following occurs while the system is

armed.

僅 A front or rear door is opened without

using the smart key.

pressed, the hazard warning lights

blink once. The system can also be

armed by locking the doors with the

key from the front doors; however,

the hazard warning lights will not

blink using this method.

僅 The liftgate is opened without using

the smart key.

僅 The hood is opened.

The horn will sound and the hazard

warning lights will blink continuously for

approximately 27 seconds, and repeat

the horn 3 times unless the system is

disarmed. To turn off the system, unlock

the doors with the folding key or smart

key.

4. Lock the doors by pressing the lock

button on the smart key. After com

-

pletion of the steps above, the hazard

warning lights will operate once to

indicate that the system is armed.

Disarmed stage

NOTICE

The system will be disarmed when:

The theft-alarm system can be deacti

vated by an authorized Kia dealer.

-

Using the smart key

If you want this feature, consult an

authorized Kia dealer.

僅 The door unlock button is pressed.

僅 The button of the front outside door is

pressed while carrying the smart key.

NOTICE

僅 The engine is started. (within 3 sec

onds)

-

Do not arm the system until all passen

-

gers have left the vehicle. If the system is

armed while a passenger(s) remains in

the vehicle, the alarm may be activated

when the remaining passenger(s) leaves

the vehicle. If any door (or liftgate) or

hood is opened within 30 seconds after

the system enters the armed stage, the

system will be disarmed to prevent

unnecessary alarm.

After pressing the unlock button, the

hazard warning lights will blink and the

chime will sound twice (in smart key) to

indicate that the system is disarmed.

After pressing the unlock button, if any

door (or liftgate) is not opened within 30

seconds, the system will be rearmed.

NOTICE

僅 Avoid trying to start the engine while

the alarm is activated. The vehicle

starting motor is disabled during the

theft-alarm stage.

If the system is not disarmed with the

folding key, insert the key into the

ignition switch, turn the ignition switch

4

14

Features of your vehicle

Theft-alarm system

to the ON position and wait for 30

seconds. Then the system will be dis

armed.

This device complies with Indus

try Canada licence-exempt RSS

standard(s).

-

僅 If you lose your keys, consult your

authorized Kia dealer.

Operation is subject to the following two

conditions:

1. This device may not cause interfer

-

CAUTION

ence, and

2. This device must accept any interfer

-

Adjusting alarm system

ence, including interference that may

cause undesired operation of the

device.

Do not change, alter or adjust the theft

alarm system in your vehicle. Improper

installation of the alarm system could

damage the vehicle or cause the system

to malfunction.

NOTICE

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user's author

ity to operate the equipment. If the

4

NOTICE

-

Malfunctions caused by improper alter

-

smart key is inoperative due to changes

or modifications not expressly approved

by the party responsible for compliance,

ations, adjustments or modifications to

the theft-alarm system are not covered

by your vehicle manufacturer warranty.

it will not be covered by your manufac

-

turer's vehicle warranty.

4

15

Features of your vehicle

Door locks

Unlocking

Door locks

Pressing the button of the front driver

side door handles with all doors (and lift

gate) closed will unlock all doors (and

liftgate) and any locked doors.

Know how to use the door lock so that

you can lock or unlock the door if neces

sary.

-

With the smart key

The button will only operate when the

smart key is within 0.7~1 m (28~40

inches) from the front driver side door

handle.

When the smart key is recognized in the

area of 0.7~1 m (28~40 inches) from the

front driver side door handle, other peo

-

ONQ5031074

ple can also open the door without pos

session of the smart key.

-

Carrying the smart key, you may lock

and unlock the vehicle doors (and lift

-

After pressing the button, the doors will

lock automatically unless you open any

door within 30 seconds.

gate). Also, you may start the engine.

Refer to the following for more details.

With the mechanical key

Locking

Pressing the button of the front driver

side door handles with all doors (and lift

-

gate) closed will lock all doors (and lift

-

gate) and any unlocked doors. If all

doors and engine hood are closed, the

hazard warning lights will blink once to

indicate that all doors are locked.

ONQ5031007_2

1. Pull out the door handle.

The button will only operate when the

smart key is within 0.7~1 m (28~40

inches) from the driver side door handle.

If you want to make sure that a door has

locked or not, you should pull the driver

side door handle.

2. Press the lever (1) located inside the

bottom part of the cover with a key or

flat-head screwdriver.

3. Push out the cover (2) while pressing

the lever (only the driver's door can be

locked/unlocked).

Even though you press the driver side

door handle buttons, the doors will not

4. Turn the key toward the rear of the

vehicle to unlock and toward the front

of the vehicle to lock. Only the driver's

door can be locked or unlocked.

lock and the chime will sound for 3 sec

-

onds if any of following occur:

僅 The smart key is in the vehicle.

僅 Doors can also be locked and

unlocked with the transmitter.

僅 The ignition switch or ENGINE START/

STOP button is in the ACC or ON posi

tion.

-

僅 Once the doors are unlocked, they

may be opened by pulling the door

handle.

僅 Any door except the liftgate is open.

4

16

Features of your vehicle

Door locks

僅 When closing the door, push the door

by hand. Make sure the doors are

closed securely.

WARNING

僅 Securely close your door before you

begin driving. Failure to fully close

your door may cause it to be opened

during vehicle operation.

NOTICE

僅 When locking the door with a

mechanical key, be aware that only

the driver's door can be locked/

unlocked.

僅 Keep your body out of the way of the

closing door to prevent injuries.

僅 To lock all doors, operate the central

lock switch inside the vehicle. Open

the car door using the inner handle,

then close the door and lock the

WARNING

Do not leave anyone in the vehicle while

it is very hot or cold outside. Vehicle inte

riors heat and cool very quickly. Do not

lock the vehicle from the outside when

-

driver's door with a mechanical key.

僅 Refer to "Operating door locks from

inside the vehicle" on page 4-18 to

lock from inside the vehicle.

there are passengers in the vehicle. Fail

ure to follow these instructions could

lead to serious injury or death.

-

4

NOTICE

CAUTION

僅 Be careful not to lose or scratch the

cover when removing it.

Do not unnecessarily open and close the

door repeatedly or with excessive force.

Such action can damage the vehicle

door.

僅 When the key cover freezes and does

not open, tap it lightly or indirectly

warm (hand temperature, etc.) it up.

僅 Do not apply excessive force to the

door and door handle. It may be dam

NOTICE

-

Always place the ENGINE START/STOP

button in the OFF position, engage the

parking brake, close all windows, and

lock all doors when leaving your vehicle

unattended.

aged.

NOTICE

僅 In cold and wet climates, door lock

and door mechanisms may not work

properly due to freezing conditions.

NOTICE

僅 If the door is locked/unlocked multiple

times in rapid succession with either

the vehicle key or door lock switch,

Always remove the ignition key, engage

the parking brake, close all windows,

and lock all doors when leaving your

vehicle unattended.

the system may stop operating tem

-

porarily in order to protect the circuit

and prevent damage to system com

-

ponents.

4

17

Features of your vehicle

Door locks

Operating door locks from inside

the vehicle

WARNING

Do not pull the inner door handle of

driver's (or passenger's) door while the

vehicle is moving. The door could open

resulting in serious injury or death.

You can operate door locks with the

door lock handle or central door lock

switch.

With the door handle

With central door lock switch

Driver side

ONQ5031008

僅 Front door

If the inner door handle is pulled when

the door is locked, the door will unlock

and open.

ONQ5031009N

Passenger side

僅 Rear door

If the inner door handle is pulled once

when the door is locked, the door will

unlock.

If the inner door handle is pulled once

more, the door will open.

ONQ5031425N

1

Door Lock

Door lock malfunction

2

3

Door Unlock

If a power door lock ever fails to function

while you are in the vehicle, try one or

more of the following techniques to exit:

Doors indicating light

Operate by pressing the central door

lock switch.

僅 Operate the door unlock feature

repeatedly (both electronic and man

ual) while simultaneously pulling on

the door handle.

-

僅 To lock all vehicle doors, press the

central door lock switch (1) of driver

and passenger side.

僅 Operate the other door locks and han

dles, front and rear.

-

僅 To unlock all vehicle doors, press cen

tral door unlock switch (2) of driver

and passenger side.

-

僅 Lower a front window and use the key

to unlock the door from outside.

When all vehicle doors are locked, the

indicating lights (3) on the driver's door

and passenger's door will turn on. If any

door is unlocked, it would go off.

僅 Move to the cargo area and open the

liftgate.

If any door is opened, the doors will not

lock even though the central door lock

switch is pressed.

4

18

Features of your vehicle

Door locks

harm, possibly from someone gaining

entry to the vehicle. Never leave children

or animals unattended in your vehicle.

WARNING

Doors

僅 The doors should always be fully

closed and locked while the vehicle is

Door lock/unlock features

in motion to prevent accidental open

ing of the door. Locked doors will also

discourage potential intruders when

the vehicle stops or slows down.

-

The vehicle is equipped with door lock/

unlock features for the safety and con

venience of passengers.

-

僅 Be careful when opening doors and

watch out for vehicles, motorcycles,

bicycles or pedestrians approaching

the vehicle in the path of the door.

Opening a door when something is

approaching can result in an accident

to cause vehicle damage or serious

injury.

Impact sensing door unlock sys

tem

-

All doors will automatically unlock when

an impact causes the air bags to deploy.

4

Speed sensing door lock system

All doors will automatically lock after the

vehicle speed exceeds 15 km/h (10

mph).

NOTICE

Unlocked vehicles

You can activate or deactivate the auto

door lock/unlock features in the vehicle.

Refer to "User settings mode" on page 4-

71.

Leaving your vehicle unlocked can

increase the risk of vehicle theft or any

possible criminal harm caused by some

-

one hiding in your vehicle while you are

gone. Always remove the ignition key,

engage the parking brake, close all win

dows and lock all doors when leaving

your vehicle unattended.

-

WARNING

Unattended children, the elderly or

pets

An enclosed vehicle can become

extremely hot, causing death or severe

injury such as heatstroke to unattended

children, the elderly or pets who cannot

escape the vehicle. When left or trapped

in a hot vehicle, make sure to stay

hydrated and avoid sun exposure

through the vehicle’s windshield.

Furthermore, children might operate

features of the vehicle that could injure

them, or they could encounter other

4

19

Features of your vehicle

Door locks

door safety locks should be used when

-

Child-protector rear door lock

ever children are in the vehicle.

The child safety lock is provided to help

prevent children from accidentally open

-

ing the rear doors from inside the vehi

-

WARNING

cle.

僅 The system does not detect every

obstacle approaching the vehicle exit.

僅 The driver and passenger are respon

sible for the accident occurred while

exiting the vehicle. Always check the

-

surrounding before you exit the vehi

cle.

-

In case of an emergency

If the electrical power door lock switch is

not operating (e.g., dead car battery) the

only way to lock the door(s) is with the

mechanical key from the outside key

hole.

ONQ5A043019_2

The rear door safety locks should be

used whenever children are in the vehi

-

Doors without an outside key hole can

be locked as follows:

cle.

The child safety lock is located on the

1. Open the door.

edge of each rear door. When the child

safety lock is in the lock position (1), the

rear door will not open if the inner door

handle is pulled.

2. Insert the a small flat blade tool into

the emergency door lock hole and

turn the key to the lock position as

shown.

To lock the child safety lock, insert a

small flat blade tool (or screwdriver) into

the hole and turn it to the lock position.

To allow a rear door to be opened from

inside the vehicle, unlock the child safety

lock.

To open the rear door, pull the outside

door handle (2).

ONQ5A043020

3. Close the door securely.

WARNING

NOTICE

Rear door locks

If the electrical power to door lock switch

is not operating (e.g. dead car battery)

and the liftgate is closed, you will not be

able to open the liftgate until power is

restored.

If children accidentally open the rear

doors while the vehicle is in motion, they

could fall out and be severely injured or

killed. To prevent children from opening

the rear doors from the inside, the rear

4

20

Features of your vehicle

Door locks

Rear Occupant Alert (ROA) Sys

tem

-

WARNING

The Rear Occupant Alert (ROA) system

uses the door opening and closing his

tory to issue a reminder. It does not

actually detect objects or people in the

rear seats. Check the rear seat for occu

pants before leaving the vehicle. Failure

to do so can lead to serious injury or

death.

The Rear Occupant Alert (ROA) is pro

-

vided to help prevent exiting the vehicle

with a rear passenger left in the vehicle.

僅 When you open the front door after

opening and closing the rear door and

turning off the engine, the "Check rear

seats" warning message appears on

the cluster.

-

CAUTION

僅 The Rear Occupant Alert (ROA) sys

tem uses a rear door opened and

closed history.

-

4

僅 The history is reset after the driver

OCV041119L

turns off ignition normally, exits the

vehicle and locks the door remotely.

So even if a rear door does not

reopen, the ROA system alert can

occur.

A: Check rear seats

You can activate or deactivate the ROA

from the User Settings mode in the clus

ter LCD display. If your vehicle is

-

僅 For example, after the ROA system

alert occurs, if the driver does not lock

the door, and drives again, the alert

can occur.

equipped with an infotainment system,

you can learn how to setup on the web

site via QR code in the infotainment

quick reference guide.

-

The option can be found under the fol

-

lowing menu:

1. Press the MODE button ( ) several

times on the steering wheel until 'User

Settings' menu appears on the LCD.

2. Select 'Convenience → Rear Occupant

Alert' with the MOVE switch (

/

) and the OK button on the steering

wheel.

If your vehicle is equipped with the info

tainment system, the option can be

found under the following menu:

-

1. Press the SETUP button of the info

-

tainment system.

2. Press 'Vehicle → Convenience → Rear

Occupant Alert' on the infotainment

system screen.

4

21

Features of your vehicle

Driver Position Memory System

4. "Settings 1 (or 2) saved" will appear on

the LCD display.

Driver Position Memory Sys

tem (if equipped)

-

Recalling memory positions

The Driver Position Memory System is

provided to store and recall the following

memory settings with a simple button

operation.

1. The ignition switch or ENGINE START/

STOP button is in the ON position.

2. Press the desired memory button (1 or

2). The system will beep once, and

then the driver's seat position, instru

-

ment panel illumination intensity will

automatically adjust to the stored

positions.

3. "Settings 1 (or 2) applied" will appear

on the LCD display.

ONQ5031006

僅 Driver's seat position

僅 While recalling the "1" memory posi

tion, pressing 1 button temporarily

-

僅 Instrument panel illumination intensity

WARNING

stops the adjustment of the recalled

memory position. Pressing the 2 but

ton recalls the "2" memory position.

-

Never attempt to operate the driver

position memory system while the vehi

-

僅 While recalling the "2" memory posi

-

cle is moving.

tion, pressing the SET or 2 button

temporarily stops the adjustment of

the recalled memory position. Press

This could result in loss of control, and

an accident causing death, serious

injury, or property damage.

-

ing the 1 button recalls the "1" memory

position.

NOTICE

僅 While recalling the stored positions,

pressing one of the control buttons

for the driver's seat, outside rear view

僅 If the battery is disconnected, the

memory settings will be erased.

僅 If the Driver Position Memory System

does not operate normally, have the

system checked by an authorized Kia

dealer.

mirror, or instrument panel illumina

-

tion will cause the movement of that

component to stop and move in the

direction that the control button is

pressed.

Storing memory positions

Driver position memory system

reset

1. The ignition switch or ENGINE START/

STOP button is in the ON position.

If the Driver position memory system

2. Adjust the driver's seat position,

instrument panel illumination intensity

to the desired position.

does not work properly, initialize the sys

tem as follows.

-

How to initialize:

3. Press one of the memory buttons (1 or

2) for more than 1 second. The system

will beep twice.

1. Stop the vehicle and open the driver's

door with the ignition switch or

ENGINE START/STOP button in the

4

22

Features of your vehicle

Driver Position Memory System

ON position and the vehicle shifted to

P (Park).

僅 It will move the driver's seat forward

when the vehicle is turned ON or the

driver's door is closed with the smart

key with you.

2. Pull the driver's seat forward as far as

possible and have the seatback

upright as much as possible using the

driver's seat forward/backward

adjustment and seatback angle

(recline) switches.

You can activate or deactivate the Easy

Access Function from the User Settings

Mode on the LCD display. For more

details, refer to "User settings mode" on

page 4-71. If your vehicle is equipped

with additional navigation, please refer

3. Push the SET button and seat forward

movement switch for 2 seconds

simultaneously.

to the infotainment system manual sep

-

arately supplied.

Initialization in the process:

1. Initialization begins as the alarm

sounds.

NOTICE

Upward/downward movement of the

2. The seat and seatback will automati

cally move backwards. The alarm

sound will continue while the system

is in operation.

-

4

seat may not work when passengers get

on/off the vehicle in order to prevent

foot injuries in certain places.

3. Initialization will be complete after the

seat and seatback move to the center

with an alarm sound.

If, however, cases as follows occur, the

initialization process will come to a stop

and the alarm sound will stop as well.

僅 When pushing driving position mem

-

ory system button

僅 When pushing driver's seat height

adjustment switch

僅 When shifting from P (Park) to other

positions

僅 When driving speed exceeds 3 km/h

(2 mph)

僅 When the driver's door is closed

Easy access function

The system will move the driver's seat

automatically as follows:

With smart key system

僅 It will move the driver's seat rearward

when the ENGINE START/STOP but

ton is in the OFF position and the

driver's door is opened.

-

4

23

Features of your vehicle

Liftgate

WARNING

Exhaust fumes

If you drive with the liftgate open, you

will draw dangerous exhaust fumes into

your vehicle which can cause serious

injury or death to vehicle occupants.

If you must drive with the liftgate open,

keep the air vents and all windows open

so that additional outside air comes into

the vehicle.

ONQ5031435N_2

僅 Only the liftgate is unlocked if the lift

-

gate unlock button on the transmitter

is pressed.

WARNING

Rear cargo area

僅 If unlocked, the liftgate can be opened

by pressing the handle and pulling it

up.

Occupants should never ride in the rear

cargo area where no restraints are avail

able. To avoid injury in the event of an

accident or sudden stops, occupants

should always be properly restrained.

-

僅 Once the liftgate is opened and then

closed, the liftgate locks automati

cally. (All doors must be locked.)

-

NOTICE

Opening the liftgate

In cold and wet climates, door lock and

The liftgate is locked or unlocked when

all doors are locked or unlocked with the

key, smart key or central door lock/

unlock switch.

door mechanisms may not work prop

-

erly due to freezing conditions.

WARNING

CAUTION

The liftgate swings upward. Make sure

no objects or people are near the rear of

the vehicle when opening the liftgate.

Liftgate lift

Make sure that you close the liftgate

before driving your vehicle. Possible

damage may occur to the liftgate gas

lifters and attached hardware if the lift

gate is not closed prior to driving.

-

4

24

Features of your vehicle

Liftgate

Closing the liftgate

ONQ5A043030

ONQ5031432N

The liftgate can be opened by doing as

follows:

僅 To close the liftgate, lower and push

down the liftgate firmly. Make sure

that the liftgate is securely latched.

1. Input the a small flat blade tool into

the hole.

2. Push the a small flat blade tool to the

right (1).

WARNING

Make sure your hands, feet and other

parts of your body are safely out of the

way before closing the liftgate.

3. Push up the liftgate.

4

WARNING

僅 You and your passengers must be

aware of the location of the Emer

-

WARNING

gency Liftgate Safety Release lever in

Exhaust fumes

this vehicle and how to open the lift

gate in case you are accidentally

locked in the liftgate.

-

The liftgate lid should be always kept

completely closed while the vehicle is in

motion. If it is left open or ajar, poison

-

僅 Never allow anyone to occupy the

ous exhaust gases may enter the car

cargo area of the vehicle. If the liftgate

is partially or totally latched and the

person is unable to get out, serious

injury or death could occur due to lack

of ventilation, exhaust fumes and

rapid heat buildup, or because of

exposure to cold weather conditions.

and serious illness or death may result.

CAUTION

Make sure nothing is near the liftgate

latch and striker while closing the lift

-

gate. It may damage the liftgate's latch.

The cargo area is also a highly dan

-

gerous location in the event of a crash

because it is a part of the vehicle's

Emergency liftgate safety release

Your vehicle is equipped with the emer

gency liftgate safety release lever

located on the bottom of the liftgate.

When someone is inadvertently locked

in the luggage compartment.

-

crush zone. It is not a protected occu

-

pant space.

僅 Your vehicle should be kept locked

and the Smart Key should be kept out

of the reach of children. Parents

should teach their children about the

dangers of playing in liftgates.

僅 Use the release lever for emergencies

only.

4

25

Features of your vehicle

Power liftgate

Power liftgate (if equipped)

WARNING

1. Power liftgate open/close button

僅 No one should be allowed to occupy

the cargo area of the vehicle at any

time. The cargo area is a very danger

ous location in the event of a crash.

-

僅 Use the release lever for emergencies

only. Use with extreme caution, espe

-

cially while the vehicle is in motion.

ONQ5031434N

2. Power liftgate handle switch

CAUTION

Make sure there are no people or

objects around the liftgate before open

ing or closing the liftgate. Wait until the

-

liftgate is open fully and stopped before

loading or unloading cargo from the

vehicle.

WARNING

Do not grasp the part supporting the lift

-

gate (gas lifter), as this may cause seri

ous injury.

-

ONQ5031435N_2

3. Power liftgate close button

ONQ5031013L

ONQ5031010N

4. Power liftgate open/close button

NOTICE

If ignition switch or ENGINE START/

STOP button is ON position, the power

liftgate can operate when the gear is in P

(Park).

4

26

Features of your vehicle

Power liftgate

NOTICE

WARNING

Do not put heavy objects on the power

liftgate when you operate the power lift

gate. Additional weight on liftgate could

cause damages to the system.

Make sure there are no people or

objects around the liftgate before open

ing or closing the power liftgate. Wait

until the liftgate is open fully and

stopped before loading or unloading

cargo from the vehicle.

-

WARNING

Never leave children or animals unat

tended in your vehicle. Children or ani

-

Opening the liftgate

-

The power liftgate will open automati

cally by doing one of the followings:

-

mals might operate the power liftgate

that could result in injury to themselves

or others, or damage the vehicle.

僅 Press the power liftgate open button

on the key for approximately one sec

-

ond.

WARNING

4

Make sure that there are no people or

objects in the path of the power liftgate

(or smart liftgate) prior to use. Serious

injury, damage to the vehicle or damage

to surrounding objects may result if con

-

tact with the power liftgate (or smart lift

-

ONQ5031433N

gate) occurs.

僅 For emergency stop while power lift

-

gate operating, press the power lift

-

gate open/close button shortly.

ONQ5031354L

僅 A: 70 cm (27 inches)

僅 B: 70 cm (27 inches)

ONQ5031434N

僅 Press the liftgate handle switch carry

-

ing the smart key with you.

CAUTION

If all the doors are unlocked, the lift

gate can be opened without the smart

key.

-

Do not close or open the power liftgate

manually. This may cause damage to

the power liftgate. If it is necessary to

close or open the power liftgate manu

ally when the battery is discharged or

disconnected, do not apply excessive

force.

-

4

27

Features of your vehicle

Power liftgate

ONQ5031010N

The liftgate will close automatically.

Power liftgate non-opening con

ditions

-

The power liftgate will not open auto

-

ONQ5031435N_2

matically, when the vehicle is moving

more than 3 km/h (2 mph).

Closing the liftgate

The power liftgate will close automati

cally by doing one of the following:

-

NOTICE

The chime will sound continuously if you

drive over 3 km/h (2 mph) with the lift

僅 Press the power liftgate open button

on the key for approximately one sec

ond.

-

gate opened. Stop your vehicle immedi

ately at a safe place and check if your

liftgate is opened.

-

CAUTION

Do not operate the power liftgate more

than 5 times continuously.

ONQ5031433N

It may damage the power liftgate sys

-

僅 Press the power liftgate close button

for approximately one second when

the liftgate is opened.

tem. If the spindle is strained due to con

tinuous operation, the chime will sound

3 times and the power liftgate will not

operate. At this time, stop operating the

-

liftgate and leave it for more than 1 min

-

ute.

Never intentionally place any object or

part of your body in the path of the

ONQ5031434N

power liftgate to make sure the auto

-

matic reversal operates.

The liftgate will close automatically.

僅 For emergency stop while power lift

-

NOTICE

gate operating, press the power lift

-

gate open/close button shortly.

僅 The power liftgate can be operated

when the engine is not running. How

ever the power liftgate operation con

sumes large amounts of vehicle

僅 Press the power liftgate close button

when the liftgate is opened.

-

electric power. To prevent the battery

4

28

Features of your vehicle

Power liftgate

from being discharged, do not oper

ate it excessively e.g.: more than

approximately 10 times repeatedly.

-

NOTICE

Never operate power liftgate attached

with any heavy objects (ex. bicycles). It

could damage the power liftgate.

僅 To prevent the battery from being dis

-

charged, do not leave the power lift

gate in the open position for a long

time.

-

How to reset the power liftgate

僅 Do not modify or repair any part of

the power liftgate by yourself, visit an

authorized Kia dealer.

If the battery has been discharged or

disconnected, or if the related fuse has

been replaced or disconnected, for the

power liftgate to operate normally, reset

the power liftgate as follow:

僅 When jacking up the vehicle to

change a tire or repair the vehicle, do

not operate the power liftgate. This

could cause the power liftgate to

operate improperly.

1. Make sure the gear is shifted to P

(Park) position.

2. Press and hold the Power liftgate

open/close button located inside the

liftgate.

4

僅 In cold and wet climates, the power

liftgate may not work properly due to

freezing conditions.

And then press the power liftgate

outer handle switch for more than 3

seconds with pressing the power lift

gate open/close button. The chime

will cound.

-

Automatic reversal

During power opening and closing if the

power liftgate is blocked by an object or

part of the body, the power liftgate will

detect the resistance.

3. Close the liftgate manually.

4. Press the power liftgate open button

on the outside of the vehicle.

僅 If the resistance is detected while

opening the liftgate, it will stop and

move in the opposite direction.

5. The liftgate will open and the chime

will sound.

僅 If the resistance is detected while clos

ing the liftgate, it will stop and move in

the opposite direction.

-

6. If the liftgate is stopped before it is

fully open, resetting will not proceed.

Wait until the liftgate is open fully and

stopped.

However, if the resistance is weak such

as from an object that is thin or soft, or

the liftgate is near the latched position,

the automatic stop and reversal may not

detect the resistance. If the automatic

reversal feature operates continuously

If the power liftgate does not work prop

erly after the above procedure, have the

system checked by an authorized Kia

dealer.

-

NOTICE

more than twice during opening or clos

-

ing operation, the power liftgate may

If the power liftgate does not operate

normally, check again if the gear is in the

correct position.

stop at that position. At this time, check

if there are no objects near the liftgate,

and operate the liftgate automatically

again.

4

29

Features of your vehicle

Power liftgate

Power liftgate speed adjustment

Power liftgate opening height

user setting

To adjust the power liftgate speed, go to

'User Settings → Door → Power liftgate

The driver may set the height of a fully

opened liftgate by following the below

instruction.

speed → Normal/Fast' within the instru

-

ment cluster settings of the infotainment

system.

僅 If power liftgate function turns off,

you can not adjust the power liftgate

speed.

僅 Initial speed of Power liftgate is set as

"Fast".

ONQ5031010N

For more details, refer to "User settings

mode" on page 4-71.

The liftgate opening height can be

adjusted within the instrument cluster

settings or the infotainment system.

Power liftgate opening height

setting

To adjust the power liftgate opening

height, go to 'User Settings → Door →

Power Liftgate Opening Height → User

Height Setting' to adjust the vehicle's lift

gate height.

The driver may set the height of a fully

opened liftgate by following the below

instruction.

-

Follow this instruction to adjust the lift

-

gate height:

1. Adjust the liftgate to the preferred

height.

2. Press the power liftgate close button

for approximately 3 seconds.

3. After the beep sound appears, the

setup is finished.

The initial setting for 'User Height Set

-

ting' is identical to 'Full Open'.

ONQ5041204N

The liftgate will open to the height the

driver has set up.

The liftgate opening height can be

adjusted within the instrument cluster

settings or the infotainment system.

To adjust the power liftgate opening

height, go to 'User Settings → Door →

Power Liftgate Opening Height → Level

1/Level 2/Level 3/Full Open/User Height

Setting' to adjust the vehicle's liftgate

height.

4

30

Features of your vehicle

Smart Liftgate with Auto Open

(if equipped)

On a vehicle equipped with a smart key,

the liftgate can be opened using the

Smart Liftgate with Auto Open system.

ONQ5031436N

If you are positioned in the detecting

area (50~100 cm [20~40 inches]

behind the vehicle) carrying a smart

key, the hazard warning lights will

blink and chime will sound to alert you

the smart key has been detected and

the liftgate will open.

ONQ5031011N

How to use the Smart Liftgate

with Auto Open

NOTICE

The liftgate can be opened with no-

4

touch activation satisfying all the condi

tions below.

-

Do not approach the detecting area if

you do not want the liftgate to open. If

you have unintentionally entered the

detecting area and the hazard warning

lights and chime starts to operate, leave

the detecting area with the smart key.

The liftgate will stay closed.

僅 After 15 seconds when all doors are

closed and locked

僅 Positioned in the detecting area for

more than 3 seconds.

NOTICE

3. Automatic opening

The Smart Liftgate with Auto Open does

not operate when:

僅 The smart key is detected within 15

seconds after the doors are closed

and locked, and is continuously

detected.

僅 The smart key is detected within 15

seconds after the doors are closed

and locked, and 1.5 m (60 inches)

from the front door handles.

ONQ5031437N

The hazard warning lights will blink

and chime 6 times and then the lift

gate will open.

-

僅 A door is not locked or closed.

僅 The smart key is in the vehicle.

WARNING

僅 Make sure you close the liftgate

before driving your vehicle.

1. Setting

To activate the Smart Liftgate with

Auto Open, go to 'User Settings →

Door → Smart Liftgate with Auto

Open' on the LCD display.

僅 Make sure there are no people or

objects around the liftgate before

opening or closing the liftgate.

僅 Make sure objects in the liftgate do

2. Detect and Alert

not come out when opening the lift

-

4

31

Features of your vehicle

Smart Liftgate with Auto Open

gate on a slope. It may cause serious

injury.

Make sure to be aware of how to deacti

vate the Smart Liftgate with Auto Open

function for emergency situations.

-

僅 Make sure to deactivate the Smart

Liftgate with Auto Open when wash

-

NOTICE

ing your vehicle. Otherwise, the lift

-

僅 If you press the door unlock button

(2), the Smart Liftgate with Auto Open

function will be deactivated temporar

ily. But, if you do not open any door

for 30 seconds, the Smart Liftgate

gate may open inadvertently.

僅 The key should be kept out of reach

of children. Children may inadver

tently open the Smart Liftgate with

Auto Open while playing around the

rear area of the vehicle.

-

with Auto Open function will be acti

vated again.

-

僅 If you press the liftgate open button

(3) for more than 1 second, the liftgate

opens.

CAUTION

Liftgate lift

Make certain that you close the liftgate

before driving your vehicle. Possible

damage may occur to the liftgate gas

僅 If you press the door lock button (1) or

liftgate open button (3) when the

Smart Liftgate with Auto Open func

tion is not in the Detect and Alert

stage, the Smart Liftgate with Auto

-

lifters and attached hardware if the lift

gate is not closed prior to driving.

-

Open function will not be deactivated.

僅 In case you have deactivated the

Smart Liftgate with Auto Open func

tion by pressing the smart key button

and opened a door, the Smart Liftgate

How to deactivate the Smart Lift

gate with Auto Open function

using the smart key

-

with Auto Open function can be acti

-

vated again by closing and locking all

doors.

ONQ5031066

1

Door lock

2

3

4

5

Door unlock

Liftgate open

Panic button

Remote start

If you press any button of the smart key

during the Detect and Alert stage, the

Smart Liftgate with Auto Open function

will be deactivated.

4

32

Features of your vehicle

Smart Liftgate with Auto Open

僅 The detecting range may decrease or

increase when :

Detecting area

- One side of the tire is raised to

replace a tire or to inspect the vehi

-

cle.

- The vehicle is slantingly parked on

a slope or unpaved road, etc.

ONQ5P041020N

僅 The Smart Liftgate with Auto Open

operates with a welcome alert if the

smart key is detected within 50~100

cm (20~40 inches) from the liftgate.

4

僅 The alert stops at once if the smart

key is positioned outside the detecting

area during the Detect and Alert

stage.

NOTICE

僅 The Smart Liftgate with Auto Open

function will not work if any of the fol

-

lowing occurs:

- The smart key is close to a radio

transmitter such as a radio station

or an airport which can interfere

with normal operation of the trans

mitter.

-

- The smart key is near a mobile two

way radio system or a cellular

phone.

- Another vehicle's smart key is being

operated close to your vehicle.

4

33

Features of your vehicle

Windows

The doors of this vehicle are equipped with power windows that can be operated by

a switch.

ONQ5031014N_4

1. Driver's door power window switch

2. Front passenger's door power window switch

3. Rear door (left) power window switch

4. Rear door (right) power window switch

5. Power window lock switch

4

34

Features of your vehicle

Windows

NOTICE

CAUTION

In cold and wet climates, power windows

may not work properly due to freezing

conditions.

Do not install any accessories in the

vehicle that extend into the open win

dow area. Such objects will impact the

proper function of the Automatic rever

sal "jam protection" feature.

-

The ignition switch or ENGINE START/

STOP button must be in the ON position

for power windows to operate.

NOTICE

Each door has a power window switch

that controls the door's window. The

driver has a power window lock button

which can block the operation of rear

passenger windows. The power windows

can be operated for approximately 3

minutes after ignition switch or ENGINE

START/STOP button turned to the ACC

or LOCK position. However, if the front

doors are opened, the power windows

cannot be operated even within the 3

minutes period.

If you press the one-touch window but

-

ton for micro adjustment, the glass will

go down to a specific location to

improve your convenience.

Window opening and closing

4

You can open and close windows using

the power window switch.

Type A

The driver's door has a master power

window switch that controls all the win

-

dows in the vehicle.

If the window cannot be closed because

it is blocked by objects, remove the

objects and close the window.

ONQ5031015N

To open or close a window, press down

NOTICE

or pull up the front portion of the corre

sponding switch to the first detent posi

tion (1).

-

While driving with the rear windows

down or with the sunroof (if equipped) in

an open (or partially open position), your

-

vehicle may demonstrate a wind buffet

ing or pulsation noise. This noise is a

-

normal occurrence and can be reduced

or eliminated by taking the following

actions. If the noise occurs with one or

both of the rear windows down, partially

lower both front windows approximately

2.5 cm (1 inch) If you experience the

noise with the sunroof open, slightly

reduce the size of the sunroof opening.

4

35

Features of your vehicle

Windows

Type B - Auto up/down window

(if equipped)

Automatic reversal (if equipped)

ONQ5031015L

Pressing or pulling up the power window

switch momentarily to the second detent

position (2) completely lowers or raises

the window even when the switch is

released. To stop the window at the

desired position while the window is in

operation, pull up or press down and

release the switch.

If the upward movement of the window

is blocked by an object or part of the

body, the window will detect the resis

tance and will stop upward movement.

The window will then lower approxi

-

mately 30 cm (11.8 inches) to allow the

object to be cleared.

To reset the power windows

If the power window does not operate

normally, the automatic power window

system must be reset as follows:

If the window detects the resistance

while the power window switch is pulled

up continuously, the window will stop

1. Turn the ignition switch or ENGINE

START/STOP button to the ON posi

tion.

upward movement then lower approxi

-

mately 2.5 cm (1 inch).

And if the power window switch is pulled

up continuously again within 5 seconds

2. Close the window and continue pull

-

ing up the power window switch for at

least 1 second after the window is

completely closed.

after the window is lowered by the auto

matic window reversal feature, the auto

matic window reversal will not operate.

-

NOTICE

The automatic reverse feature for the

window is only active when the "auto up"

feature is used by fully pulling up the

switch. The automatic reverse feature

will not operate if the window is raised

using the halfway position on the power

window switch.

4

36

Features of your vehicle

Windows

Power window lock button

WARNING

The driver can disable the power win

-

Always check for obstructions before

raising any window to avoid injuries or

vehicle damage. If an object less than 4

mm (0.16 of an inch) in diameter is

caught between the window glass and

dow switches on the rear passengers'

doors by pressing the power window

lock button to the lock position

(pressed).

the upper window channel, the auto

-

matic reverse window may not detect

the resistance and will not stop and

reverse direction.

WARNING

ONQ5031016

When the power window lock button is

pressed:

The automatic reverse feature doesn't

activate while resetting the power win

dow system. Make sure body parts or

other objects are safely out of the way

before closing the windows to avoid inju

ries.

-

4

僅 The driver's master control can oper

-

ate all passengers' power windows.

-

僅 The front passenger's control can

operate the front passenger's power

window.

CAUTION

僅 The rear passengers' control cannot

operate the rear passenger's power

window.

Do not install any accessories in the

vehicle that extend into the open win

-

dow area. Such objects could prevent

the automatic reverse feature from

functioning.

CAUTION

僅 To prevent possible damage to the

power window system, do not open or

close two windows or more at the

same time. This will also ensure the

longevity of the fuse.

僅 Never try to operate the main switch

on the driver's door and the individual

door window switch in opposite direc

tions at the same time. If this is done,

the window will stop and cannot be

opened or closed.

-

WARNING

Windows

僅 NEVER leave the keys in your vehicle

with unsupervised children, when the

engine is running.

4

37

Features of your vehicle

Windows

僅 NEVER leave any child unattended in

the vehicle. Even very young children

may inadvertently cause the vehicle

to move, entangle themselves in the

* Remote window opening requires the

automatic power window down for all

seats to be applied.

CAUTION

windows, or otherwise injure them

-

僅 If you stay on the function after oper

ating the Remote window opening

function, it is likely to cause a theft. In

addition, please use caution there

might be a malfunction due to the

inflow of water while raining.

-

selves or others.

僅 Always double check to make sure all

arms, hands, head and other obstruc

tions are safely out of the way before

closing a window.

-

僅 Do not allow children play with the

power windows. Keep the driver's

door power window lock button in the

LOCK position (pressed). SERIOUS

INJURY can result from unintentional

window operation by the child.

僅 The remote window opening function

may abruptly stop, when you move

away from your vehicle during opera

-

tion. Stay in close proximity from your

vehicle, while monitoring the window

movement.

僅 Do not extend heads or any limbs out

side the window while the vehicle is in

motion.

-

僅 One of the windows may stop operat

ing, when the window is interrupted

by certain force. However, the other

windows will keep operating. Thus,

-

you should make sure that all win

dows are opened.

-

Remote window opening (if

equipped)

僅 Be careful when using the remote

window opening function, as the

doors will be unlocked.

ONQ5031439N

If Auto window down function (safety

window function) is equipped, you can

still control the corresponding windows

movement with engine turned off.

Press the Door Unlock button (1) for

more than 3 seconds. The window

moves down after the doors are

unlocked, as long as you press the door

unlock button (1). The window move

-

ment stops, when you release the door

unlock button (1).

4

38

Features of your vehicle

Hood

The hood serves as a cover for the

engine compartment.

Open the hood if maintenance work

needs to be performed in the engine

compartment or if you need to look at

the compartment.

ONQ5031440N

WARNING

Opening the hood

Support rod

1. Pull the release lever to unlatch the

hood. The hood should pop open

slightly.

僅 After opening the hood, the support

rod must be inserted completely into

the hole provided to keep the hood up

and to prevent the hood from falling

and possibly injuring someone.

僅 If the engine is hot, grab the support

rod by the area wrapped in rubber to

prevent burns.

4

Hood open warning

The hood warning message will appear

on the LCD display when hood is open.

ONQ5A043029

2. Go to the front of the vehicle, raise the

hood slightly, push the secondary

hood release lever (1) to the left and

lift the hood (2).

ONQ5031472N

The warning chime will operate when

the vehicle is being driven at or above 3

km/h (2 mph) with the hood open.

Closing the hood

ONQ5031442N

ONQ5051115

3. Pull out the support rod.

1. Before closing the hood, check the

following:

4. Hold the hood opened with the sup

-

port rod.

4

39

Features of your vehicle

Fuel filler door

僅 All filler caps in the engine com

partment must be correctly

installed.

-

Fuel filler door

The vehicle's fuel filler door must be

opened and closed by hand from out

side the vehicle.

-

僅 Gloves, rags or any other combusti

-

ble material must be removed from

the engine compartment.

Opening the fuel filler door

To unlock fuel filler door:

2. Lower the hood until it is about 12 in.

(30 cm) above the closed position and

let it drop. Make sure that it locks into

place.

僅 Press the unlock button on your smart

key

僅 Press the Central Door unlock button

on armrest trim of driver's door

3. Check that the hood has engaged

properly.

僅 Pull the driver's inside door handle

outward

僅 If the hood can be raise slightly, it is

not properly engaged.

1. Turn the engine off.

僅 Open it again and close it with a lit

tle more force.

-

2. Ensure the driver's door is unlocked

for unlocking fuel filler door.

3. Press the rear center edge of fuel filler

door.

CAUTION

Hood obstruction

Before closing the hood, ensure that all

obstructions are removed from the hood

opening. Closing the hood with an

obstruction present in the hood opening

may result in severe personal injury or

property damage.

ONQ5031443N

4. Pull the fuel filler door (1) out to fully

open.

WARNING

Fire risk

Do not leave gloves, rags or any other

combustible material in the motor com

partment. Doing so may cause a heat-

induced fire.

-

ONQ5031444N

WARNING

5. To remove the fuel tank cap (2), turn it

counterclockwise. You may hear a

hissing noise as the pressure inside

the tank equalizes.

Unsecured hood

Always double check to be sure that the

hood is firmly latched before driving

away. If it is not latched, the hood could

fly open while the vehicle is being driven,

causing a total loss of visibility, which

may result in an accident.

6. Place the cap on the fuel filler door.

4

40

Features of your vehicle

Fuel filler door

vehicle to a warm place and allow the ice

to melt.

NOTICE

The fuel filler door will unlock when

Driver's door is unlocked

Closing the fuel filler door

To unlock fuel filler door:

To lock fuel filler door:

僅 Press the unlock button on your smart

key

僅 Press the lock button on your smart

key

僅 Press the Central Door unlock button

on armrest trim of driver's door

僅 Press the Central Door lock button on

armrest trim of driver's door

僅 Pull the driver's inside door handle

outward

* All doors will automatically lock after

the vehicle speed exceeds 15 km/h

(9.3 mph). Fuel lid is also locked when

vehicle speed exceeds 15 km/h (9.3

mph).

The fuel filler door will lock when all

doors are locked

To lock fuel filler door:

僅 Press the lock button on your smart

key

4

1. To install the fuel tank cap, turn it

clockwise until it "Clicks".

僅 Press the Central Door lock button on

armrest trim of driver's door

2. Close the fuel filler door by pressing

rear center edge of the fuel filler door.

※ All doors will automatically lock after

the vehicle speed exceeds 15 km/h (9.3

mph). Fuel door is also locked when

vehicle speed exceeds 15 km/h (9.3

mph).

NOTICE

Press the vehicle's fuel door to LOCK

position when the fuel filler door is com

pletely closed in order to lock the fuel

filler door.

-

If the fuel filler door is not completely

closed, the fuel filler door will not be

locked.

CAUTION

Before refueling, be sure to check what

type of fuel is used for your vehicle.

If you put diesel or ethanol fuel into a

gasoline-powered vehicle, it may affect

WARNING

the fuel system and cause serious dam

-

Refueling

age to the vehicle.

Always remove the fuel cap carefully

and slowly. If the cap is venting fuel or if

you hear a hissing sound, wait until the

condition stops before completely

removing the cap.

NOTICE

If the fuel filler door does not open

because ice has formed around it, tap

If pressurized fuel sprays out, it can

cover your clothes or skin and subject

you to the risk of fire and burns.

lightly or push on the door to break the

ice and release the door. Do not pry on

the door. If necessary, spray around the

door with an approved de-icer fluid (do

not use radiator anti-freeze) or move the

4

41

Features of your vehicle

Fuel filler door

fuel filler neck, nozzle, or other gas

source.

NOTICE

When refueling on unlevel ground, the

僅 Do not get back into a vehicle once

you have begun refueling since you

can generate static electricity by

touching, rubbing or sliding against

any item or fabric (polyester, satin,

nylon, etc.) capable of producing

static electricity. Static electricity dis

fuel gauge may not point to the F posi

tion. It is not a malfunction. If you move

your vehicle to a level ground, the fuel

gauge will move to the full position.

-

NOTICE

-

charge can ignite fuel vapors resulting

in rapid burning. If you must reenter

the vehicle, you should once again

eliminate potentially dangerous static

electricity discharge by touching a

metal part of the vehicle, away from

the fuel filler neck, nozzle or other

gasoline source.

Tighten the cap until it clicks one time,

otherwise, the engine warning indicator

light will appear.

CAUTION

Keep the door into LOCK position when

the vehicle is being washed (i.e. high

pressure washer, automatic car washer,

etc.)

WARNING

Portable fuel container

WARNING

When using an approved portable fuel

container, be sure to place the container

on the ground prior to refueling. Static

electricity discharge from the container

can ignite fuel vapors causing a fire.

Once refueling has begun, contact with

the vehicle should be maintained until

the filling is complete. Use only

Always tighten your fuel cap before you

leave the fuel station. Failure to securely

install your fuel cap can lead to fuel spill

-

age in an accident and increase fire risk.

WARNING

Fire/explosion risk

approved portable plastic fuel contain

-

Read and follow all warnings posted at

the gas station facility. Failure to follow

all warnings will result in severe personal

injury, severe burns or death due to fire

or explosion.

ers designed to carry and store gasoline.

WARNING

Cell phone fires

Do not use cellular phones while refuel

ing. Electric current and/or electronic

interference from cellular phones can

potentially ignite fuel vapors causing a

fire.

-

WARNING

Static electricity

僅 Before touching the fuel nozzle, you

should eliminate potentially danger

ous static electricity discharge by

touching another metal part of the

-

vehicle, a safe distance away from the

4

42

Features of your vehicle

Fuel filler door

WARNING

Refueling & Vehicle fires

Risk of injury from fuel

When refueling, always shut the engine

Fuels are poisonous and harmful to your

health.

off. Sparks produced by electrical com

ponents related to the engine can ignite

fuel vapors causing a fire. Once refuel

-

僅 Fuel contains substances that are

harmful if inhaled.

-

ing is complete, check to make sure the

filler cap and filler door are securely

closed, before starting the engine.

僅 Do not swallow fuel or let it come into

contact with skin, eyes or clothing.

僅 Do not inhale fuel vapors.

僅 Keep children away from fuel.

WARNING

Smoking

If you or other people come into contact

with fuel, observe the following:

DO NOT use matches or a lighter and

DO NOT SMOKE or leave a lit cigarette

in your vehicle while at a gas station

especially during refueling. Automotive

fuel is highly flammable and can result

in fire when ignited.

僅 Immediately rinse fuel off your skin

with soap and water.

4

僅 If fuel comes into contact with your

eyes, immediately rinse them thor

-

oughly with clean water. Seek medical

attention immediately.

僅 If you swallow fuel, seek medical

attention immediately. Do not induce

vomiting.

Make sure to refuel your vehicle accord

ing to "Fuel requirements" on page 1-2.

-

If the fuel filler cap requires replace

-

僅 Change immediately out of clothing

that has come into contact with fuel.

ment, use only a genuine Kia cap or the

equivalent specified for your vehicle. An

incorrect fuel filler cap can result in a

serious malfunction of the fuel system or

emission control system.

NOTICE

Damage caused by the wrong fuel

Fuel that does not conform to the

required quality can lead to increased

wear as well as damage to the engine

and exhaust system. Only use the fuel

recommended.

CAUTION

Exterior paint

Do not spill fuel on the exterior surfaces

of the vehicle. Any type of fuel spilled on

painted surfaces may damage the paint.

NOTICE

WARNING

Damage caused by the wrong fuel

Vehicles with a gasoline engine:

僅 Do not allow anyone that has not dis

charged static electricity from their

body to come close to an open fuel

tank.

-

Even small amounts of the wrong fuel

could result in damage to the fuel sys

-

tem, the engine and the emission control

system.

僅 Do not inhale vaporized fuel.

4

43

Features of your vehicle

Panoramic sunroof

Panoramic sunroof (if

NOTICE

equipped)

If your vehicle is equipped with a sun

Do not use diesel or ethanol to refuel

vehicles with a gasoline engine.

-

roof, you can slide or tilt your sunroof

with the sunroof switch located on the

overhead console.

NOTICE

Do not switch on the ignition if you acci

-

dentally refuel with the wrong fuel. Oth

-

erwise, fuel can enter the fuel system.

Even small amounts of the wrong fuel

could result in damage to the fuel sys

tem and the engine. Have the system

serviced by an authorized Kia dealer.

-

OCV041027L

The sunroof can only be operated when

the ignition switch or ENGINE START/

NOTICE

STOP button is in the ON or START posi

tion.

-

Do not overfill the fuel tank

Do not overfill the fuel tank; otherwise

fuel may spill, causing harm to the envi

ronment and damaging the vehicle.

The sunroof can be operated for

approximately 3 minutes after the igni

tion switch or ENGINE START/STOP but

ton is in the ACC or LOCK/OFF position.

However, if the front door is open, the

-

sunroof cannot be operated even within

the 3 minute period.

WARNING

僅 Never adjust the sunroof or sunshade

while driving. This could result in loss

of control and an accident that may

cause injury, or property damage.

僅 Do not leave the engine running and

the key in your vehicle with unsuper

vised children. Unattended children

could operate the sunroof, which

could result in serious injury.

-

僅 Do not sit on the top of the vehicle. It

may cause injury or vehicle damage.

NOTICE

Do not operate the sunroof when roof

bars are installed on the vehicle or when

there is luggage on the roof.

4

44

Features of your vehicle

Panoramic sunroof

Power sunshade

Tilt open/close

ONQ5H031027_2

ONQ5H031037_2

Use the power sunshade to block direct

sunlight coming through the sunroof

glass.

僅 Push the sunroof switch upward, the

sunroof glass tilts open. However, if

the power sunshade is close, the sun

shade will open first.

-

僅 Push the sunroof switch rearward to

the first detent position, the power

sunshade automatically slides open.

僅 Push the sunroof switch upward or

forward when the sunroof glass is tilt

opened, the sunroof glass automati

cally closes.

-

僅 Push the sunroof switch forward to

the first detent position, the power

4

sunshade automatically closes. How

ever, if the sunroof glass is open, the

glass will close first.

-

To stop the sunroof movement at any

point, push the sunroof switch in any

direction.

To stop the power sunshade at any

point, push the sunroof switch in any

direction.

Slide open/close

NOTICE

僅 Do not pull or push the power sun

-

shade by hand as such action may

damage the power sunshade or cause

it to malfunction.

ONQ5H031029_2

僅 Push the sunroof switch rearward to

the first detent position, the sunroof

glass opens. However, if the power

僅 Wrinkles formed on the power sun

shades are normal due to material

characteristic.

-

sunshade is close, the power sun

-

shade will open first.

Push the sunroof switch forward to

the first detent position, the sunroof

glass closes. However, if the sunroof

glass is close, the power sunshade will

close.

僅 Push the sunroof switch forward or

rearward to the second detent posi

-

tion, the power sunshade and sunroof

glass operate automatically (auto

slide feature).

4

45

Features of your vehicle

Panoramic sunroof

To stop the sunroof movement at any

point, push the sunroof switch in any

direction.

僅 Regularly remove any accumulated

dust on the sunroof rail.

僅 Dust accumulated between the sun

-

roof and roof panel can make noise

Open the sunroof and remove dust

regularly using a clean cloth.

Automatic reversal

僅 Do not try to open the sunroof when

the temperature is below freezing or

when the sunroof is covered with

snow or ice. The sunroof may not

work properly and may break if

opened by force.

OCV041031L

If the power sunshade or sunroof glass

senses any obstacle while it is closing

automatically, it will reverse direction

then stop at a certain position.

僅 Do not open or drive with the sunroof

glass open immediately after rain or

washing the vehicle. Water may wet

the interior of the vehicle.

The auto reverse function may not work

if an object thin or soft is caught

between the sliding power sunshade or

sunroof glass and sunroof sash.

僅 Do not extend any luggage outside

the sunroof while driving. Vehicle

damage may occur if the vehicle sud

denly stops.

-

WARNING

僅 Make sure heads, hands, arms or any

other body parts or objects are out of

the way before operating the sunroof.

Body parts or objects may get caught

causing injuries or vehicle damage.

WARNING

Do not extend your head, arms, body

parts or objects outside the sunroof

while driving. Injuries may occur if the

vehicle suddenly stops.

僅 Never deliberately use your body

parts to test the automatic reversal

Resetting the sunroof

function. The power sunshade or sun

roof glass may reverse direction, but

there is a risk of injury.

-

NOTICE

僅 Do not continue to push the sunroof

switch after the sunroof is fully

OCV041032L

opened, closed, or tilted. Damage to

the sunroof motor could occur.

In some circumstances resetting the

sunroof operation may need to be per

-

僅 Continuous operations such as slide

open/close, tilt open/close, etc. may

cause the motor or sunroof system to

malfunction.

formed. Some instances where resetting

the sunroof may be required include:

僅 When the 12-volt battery is either dis

connected or discharged

-

僅 When the sunroof fuse is replaced

4

46

Features of your vehicle

Panoramic sunroof

僅 If the sunroof one-touch AUTO OPEN/

CLOSE operation is not functioning

properly

Sunroof open warning

Sunroof resetting procedure

1. It is recommended to perform the

reset procedure with the vehicle

engine running. Start the vehicle in P

(Park).

ONQ5031120L

If the driver turns off the engine when

the sunroof is not fully closed, the warn

ing chime will sound for several seconds

and the sunroof open warning will

appear on the cluster LCD display.

-

2. Make sure the power sunshade and

sunroof glass are in the fully closed

position. If the power sunshade and

sunroof glass are open, push the

switch forward until the sunshade and

sunroof glass are fully closed.

Close the sunroof securely when leaving

your vehicle.

4

3. Release the switch when the power

sunshade and sunroof glass are fully

closed.

CAUTION

Make sure the sunroof is closed fully

when leaving your vehicle. If the sunroof

is left open, rain or snow may wet the

interior of the vehicle. Also, leaving the

sunroof open when the vehicle is unat

tended may invite theft.

4. Push the switch forward until the

power sunshade and sunroof glass

moves slightly. Then release the

switch.

-

5. Once again push and hold the sun

-

roof switch forward until the sunroof

glass slides open and close. Do not

release the switch until the operation

is completed.

If you release the switch during oper

ation, start the procedure again from

step 2.

-

NOTICE

If the sunroof does not reset when the

vehicle battery is disconnected or dis

-

charged, or the sunroof fuse is blown,

the sunroof may not operate normally.

4

47

Features of your vehicle

Steering wheel

僅 If the Electric Power Steering system

Steering wheel

does not operate normally, the warn

-

The steering wheel of this vehicle is

equipped with the Electric Power Steer

ing (EPS) system.

ing light will appear or blink on the

instrument cluster. If the power assis

tance of steering fails, you will need to

use more force to steer.

-

Electric power steering (EPS)

Power steering uses the motor to assist

you in steering the vehicle.

僅 Operating the steering wheel at lower

temperatures may require more force

and accompany noise. However,

when the temperature increases, it

returns to normal.

If the engine is off or if the power steer

ing system becomes inoperative, the

vehicle may still be steered, but it will

require increased steering effort.

-

僅 Take your vehicle to an authorized Kia

dealer and have the vehicle checked

as soon as possible.

The EPS is controlled by the power

steering control unit which senses the

steering wheel torque and vehicle speed

to command the motor.

僅 When the charging system warning

light comes on due to the low voltage

(when the alternator or battery does

The steering effort becomes heavier as

the vehicle's speed increases and

not operate normally or malfunc

-

tions), the steering wheel may require

increased steering effort.

becomes lighter as the vehicle's speed

decreases for better control of the steer

-

ing wheel.

僅 When jump starting the vehicle after

battery discharge, the steering wheel

Should you notice any change in the

effort required to steer during normal

vehicle operation, have the system

checked by an authorized Kia dealer.

may not function properly. It is a tem

porary situation due to low battery

voltage, and upon stable battery

-

charging, the steering wheel will func

tion normally again. Please move the

steering wheel around to make sure

the steering wheel is functioning

properly before driving the vehicle.

-

NOTICE

The following symptoms may occur

during normal vehicle operation:

僅 When the ENGINE START/STOP but

-

僅 The steering effort can suddenly

increase, if the operation of the EPS

system is stopped to prevent serious

accidents when EPS control unit

ton is the ON position, the steering

wheel enters normal operation mode

after diagnosing the Electric Power

Steering system (for about 3 sec

-

detects malfunction of the EPS sys

-

onds).

tem by self-diagnosis.

僅 A click noise may be heard from the

EPS relay after turning the ENGINE

START/STOP button is turned to the

ON or OFF position.

CAUTION

When you continuously operate the

僅 If the steering wheel is operated when

the vehicle is not in motion or driven

at a low speed, you may hear some

noise.

steering wheel, the overcurrent protec

tion device is activated and it requires

more force to operate the steering

-

wheel. However, this doesn't indicate a

4

48

Features of your vehicle

Steering wheel

malfunction, and it works for your safety

and will return to normal after some

time.

Adjusting steering wheel angle

and height

CAUTION

If the Electric Power Steering (EPS) sys

tem does not work or an error occurs,

the warning light on the instrument

panel may be turned on or blink and it

may require more force to operate the

-

steering wheel. In this case, please hold

the steering wheel more tightly than

usual and operate with greater force.

And then immediately pull your vehicle

over to a safe place and have your vehi

cle inspected by an authorized Kia

dealer.

ONQ5031021_2

-

1. To change the steering wheel angle,

pull down the lock release lever (1).

4

2. Adjust the steering wheel to the

desired angle (2) and distance for

ward/back (3).

-

Tilt & telescopic steering wheel

A tilt and telescopic steering wheel

allows you to adjust the steering wheel

before you drive. You can also raise it to

give your legs more room when you exit

and enter the vehicle.

Move the steering wheel, so it points

toward your chest, not toward your

face. Make sure you can see the

instrument panel warning lights and

gauges. After adjusting, pull up the

lock.

The steering wheel should be positioned

so that it is comfortable for you to drive,

while permitting you to see the instru

3. Pull up the lock-release lever to lock

the steering wheel in place.

-

ment panel warning lights and gauges.

Push the steering wheel both up and

down to be certain it is locked in posi

tion.

-

WARNING

Steering wheel adjustment

4. Be sure to adjust the steering wheel to

the desired position before driving.

Never adjust the angle and height of the

steering wheel while driving. You may

lose control of the vehicle.

NOTICE

After adjustment, sometimes the lock-

release lever may not lock the steering

wheel.

It is not a malfunction. This occurs when

two gears engage. In this case, adjust

the steering wheel again and then lock

the steering wheel.

4

49

Features of your vehicle

Steering wheel

hol and gasoline. Doing so may dam

age the surface of the steering wheel.

-

CAUTION

While adjusting the steering wheel angle

and height, please do not push or pull it

hard since the fixture can be damaged.

僅 If the surface of the steering wheel is

damaged by a sharp object, damage

to the heated steering wheel compo

nents could occur.

-

Heated steering wheel (if

equipped)

WARNING

When the ignition switch or ENGINE

If the steering wheel becomes too warm,

turn the system off. The heated steering

START/STOP button is in the ON posi

-

tion, pressing the heated steering wheel

button warms the steering wheel. The

indicator on the button will appear.

wheel may cause burns even at low tem

peratures, especially if used for long

periods of time.

-

Horn

To sound the horn, press the area indi

-

cated by the horn symbol on your steer

ing wheel (see illustration).

-

ONQ5031022

To turn the heated steering wheel off,

press the button once again. The indica

-

tor on the button will turn off.

僅 The heated steering wheel defaults to

the OFF position whenever the igni

tion switch or ENGINE START/STOP

button is in the ON position.

-

ONQ5031023

The horn will operate only when this

area is pressed. Check the horn regularly

to be sure it operates properly.

NOTICE

The heated steering wheel will turn off

CAUTION

automatically approximately 30 min

-

Do not strike the horn severely to oper

ate it, or hit it with your fist. Do not press

on the horn with a sharp-pointed object.

-

utes after the heated steering wheel is

turned on.

CAUTION

僅 Do not install any type of grip cover

for the steering wheel, it may impair

the function of the heated steering

wheel system.

僅 When cleaning the heated steering

wheel, do not use an organic solvent

such as paint thinner, benzene, alco

-

4

50

Features of your vehicle

Mirrors

For Kia Connect button function

Mirrors

This vehicle is equipped with inside and

outside rear view mirrors to provide

views of objects behind the vehicle.

Inside rear view mirror

Adjust the rear view mirror so that the

center view through the rear window is

seen. Make this adjustment before you

start driving.

ONQ5031538N

1. Roadside Assistance button

2. SOS button

Do not place objects in the rear seat or

cargo area which would interfere with

your vision out the rear window.

Day/night rear view mirror (if

equipped)

WARNING

4

Mirror adjustment

Do not adjust the rear view mirror while

the vehicle is moving. This could result in

loss of control.

OCV041036L

(A): Day, (B): Night

NOTICE

Make this adjustment before you start

driving and while the day/night lever is

in the day position (1).

Do not modify the inside mirror in any

manner, including installing a wide mir

ror. Doing so could result in injury during

an accident or deployment of the air

bag.

-

Pull the day/night lever toward you (2) to

reduce the glare from the headlamps of

the vehicles behind you during night

driving.

CAUTION

Remember that you lose some rear view

clarity in the night position.

Cleaning mirror

When cleaning the mirror, use a paper

towel or similar material dampened with

glass cleaner. Do not spray glass cleaner

directly on the mirror. It may cause the

Electric chromic mirror (ECM)

with HomeLink씾 system (if

equipped)

Electric Chromic Mirror (ECM) is that

controls the glare from the headlamps of

the vehicles behind you in nighttime or

low light driving conditions.

liquid cleaner to enter the mirror hous

ing.

-

The sensor mounted in the mirror

senses the light level around the vehicle,

and automatically controls the head

-

lamp glare from the vehicles behind you.

4

51

Features of your vehicle

Mirrors

When the engine is running, the glare is

automatically controlled by the sensor

mounted in the rear view mirror.

Your mirror will automatically dim upon

detecting glare from the vehicles travel

-

ing behind you.

The mirror defaults to the ON position

each time the vehicle is started.

Integrated HomeLink씾 Wireless

Control System

The HomeLink씾 Wireless Control Sys

-

OCV041602N

1. HomeLink Channel 1

2. HomeLink Channel 2

3. HomeLink Channel 3

tem provides a convenient way to

replace up to three handheld radio-fre

quency (RF) transmitters used to acti

vate compatible devices such as gate

operators, garage door openers, entry

-

4. Garage Door Opener Status Indicator:

Closing or Closed

door locks, security systems, and home

lighting.

5. HomeLink Operation Indicator

NOTICE

6. Garage Door Opener Status Indicator:

Opening or Opened

Considering the Home Security when

the vehicle is parked outside the garage,

the HomeLink will ONLY work when the

ignition switch is in ACC position or ON

position.

7. HomeLink User Interface Indicator

Your vehicle may be equipped with a

Gentex Automatic-Dimming Mirror with

an Integrated HomeLink씾 Wireless Con

-

trol System.

CAUTION

During nighttime driving, this feature will

automatically detect and reduce rear

Before programming HomeLink to a

garage door opener or gate operator,

make sure that people and objects are

out of the way of the device to prevent

view mirror glare. The HomeLink씾 Uni

-

versal Transceiver allows you to activate

your garage door(s), electric gate, home

lighting, etc.

potential harm or damage. When pro

-

gramming a garage door opener, it is

advised to park outside of the garage.

Automatic-Dimming Night Vision

Safety™ (NVS씾) Mirror (if

equipped)

Do not use HomeLink with any garage

door opener that lacks safety stop and

reverse features as required by U.S. fed

eral safety standards (this includes any

The NVS씾 Mirror automatically reduces

glare by monitoring light levels in the

front and the rear of the vehicle. Any

objects that obstructs the light sensor

will degrade the automatic dimming

control feature.

-

garage door opener model manufac

tured before April 1, 1982). A garage

-

door that cannot detect an object signal

ing the door to stop and reverse - does

not meet current U.S. federal safety

-

For more information regarding NVS씾

mirrors and other applications, please

refer to the Gentex website:

www.gentex.com

standards. For more information, con

-

tact HomeLink at www.homelink.com

,

4

52

Features of your vehicle

Mirrors

or call HomeLink customer support at 1-

to HomeLink for quicker training and

accurate transmission of the radio-

frequency signal.

800-355-3515

.

It is also recommended that a new bat

-

tery be replaced in the hand-held trans

mitter of the device being trained to

-

3. Place the ignition switch or ENGINE

START/STOP button to the ACC

HomeLink for quicker training and accu

-

(Accessory) position for program

-

rate transmission of the radio frequency.

ming of HomeLink.

1. Programming HomeLink씾

The following steps show how to pro

-

gram HomeLink. If you have any ques

-

tions or are having difficulty

programming your HomeLink buttons,

refer to the HomeLink website or call the

HomeLink customer support toll-free

number. Do this, before going back to

the dealer who sold you the car.

OCV041603N

4

2) Programming a New Home

Link씾 Button

-

1. Press and release the HomeLink but

ton ((1), (2) or (3)) you would like to

-

僅 Visit the HomeLink website at:

www.homelink.com. Then at the top

of the page, choose your vehicle

make. Then watch the You Tube

program. If successful, the HomeLink

indicator light (7) will flash orange

slowly. If the HomeLink indicator light

does not blink orange slowly, then

start over and perform the steps of

"Erasing Home- Link Buttons" section

again.

video, and/or access additional web

site information.

-

僅 If you choose to access the website

via your cell phone, scan the QR code.

僅 Or, call HomeLink customer support

at 1-800-355-3515

OCV041604N

(Please have the vehicle make/model

AND the opener device make/model

readily available.)

2. Position the garage door opener

remote 1 - 3 inches (2 - 8 cm) away

from the HomeLink buttons.

1) Programming Preparation

1. When programming a garage door

opener, it is advised to park the vehi

cle outside of the garage.

-

2. It is recommended that a new battery

be placed in the hand-held transmit

ter of the device being programmed

OCV041605N

-

4

53

Features of your vehicle

Mirrors

3. While the HomeLink indicator light (7)

is flashing orange, press and hold the

hand-held remote button. Continue

pressing the hand-held remote button

until the HomeLink indicator light (7)

light changes from orange to green.

You may now release the hand-held

remote button.

4. Wait until your garage door comes to

a complete stop, regardless of posi

tion, before proceeding to the next

steps.

-

ODL3A040504

5. Press and release the HomeLink but

ton you are programming and

observe the indicator light.

-

* A ladder and/or second person may

simplify the following steps.

7. Firmly press and release the "Learn"

,"Smart", "Set" or "Program"" button.

You now have up to 30 seconds in

which to complete the next step.

僅 If the indicator light remains solid

green, your device should operate

when the HomeLink button is

pressed. At this point, if your device

8. Return to the vehicle and firmly press,

hold for two seconds and release, the

HomeLink button up to three times in

operates, programming is com

-

plete.

僅 If the indicator light rapidly flashes

green, firmly press, hold for two

seconds and release the HomeLink

button up to three times in a row

a row slowly. Do not press the Home

Link button rapidly. As soon as you

see the garage door start to move,

stop pressing any buttons until a few

seconds after the garage door has

come to a complete stop, regardless

of position. At this point programming

is complete and your device should

operate when the HomeLink button is

pressed and released.

-

slowly to complete the program

-

ming process. Do not press the

HomeLink button rapidly. At this

point if your device operates, pro

-

gramming is complete. If the device

does not operate, continue with

step 6.

6. At the garage door opener motor,

(security gate motor, etc.) locate the

"Learn", "Smart", "Set" or "Program"

button. This can usually be found

where the hanging antenna wire is

attached to the motor-head unit (see

the device's manual to identify this

button). The name and color of the

button may vary by manufacturer.

3) Two-Way Communication Pro

gramming (For select garage

door openers)

-

If your garage door opener has the

'myQ' logo on its side, your opener has

Two-Way Communication capability.

HomeLink has the capability to establish

Two-Way Communication with your

garage door opener. HomeLink can

receive and display "closing" or "open

-

ing" status messages from compatible

4

54

Features of your vehicle

Mirrors

garage door openers. At any time,

5. Return to the vehicle and firmly press

HomeLink can also recall and display the

last recorded status communicated by

the garage door opener to indicate your

garage door being "closed" or "opened".

and release the programmed Home

Link button to activate your garage

-

door. The Two-Way Communication

indicators (4), (6) flash in orange

when the door is moving. Do not

make any additional button presses

until AFTER the garage door has

come to a complete stop.

To check if your garage door opener is

compatible with this feature, refer to

www.homelink.com/compatible/Two-

way-Communication. If your garage

door opener has this functionality, AND

the Two-Way Communication indicators

(4), (6) in the mirror appear while the

garage door is opening/closing, then no

further steps are needed. Two-Way

Communication Programming is already

complete. However, if your garage door

opener has this functionality, AND the

Two-Way Communication indicators (4),

(6) in the mirror DO NOT appear while

the garage door is opening/closing, use

the following instructions to enable this

functionality.

6. Your Two-Way Communication pro

-

gramming is now complete.

NOTICE

If your garage door opener has Two-

Way Communication functionality, it is

possible for HomeLink to stop function

ing the garage door shortly after initial

programming, if the Two-Way Commu

nication Programming wasn't properly

completed. This usually happens after

4

-

the first 10 times a programmed Home

-

Link button is pressed. If you experience

this, completing the "Programming a

New HomeLink Button" and "Two-Way

Communication Programming" will

restore door operation.

1. In your vehicle, press and hold the

programmed HomeLink button for 2

seconds, then release. Confirm that

the garage door is moving. AFTER it

stops, you will have one minute to

complete the following steps:

4) Canadian Programming

* A ladder and/or second person may

simplify the following steps.

Canadian radio-frequency laws require

transmitter remote signals to "time-out"

(or quit) after a couple seconds of trans

mission, which may not be long enough

for HomeLink to pick up the signal

during programming.

2. On your garage door opener in your

garage, locate the "Learn" button

(usually near where the hanging

antenna wire is attached to the

-

garage door opener). If there is diffi

-

culty locating this button, refer to the

device's owner's manual.

If you live in Canada or you are having

difficulties programming a gate operator

or garage door opener by using the pro

gramming procedures, replace "Pro

gramming a New HomeLink Button"

step 3 with the following:

-

3. Press and release the "Learn" button.

4. A light on your garage door opener

-

may flash, and your Two-Way Com

-

munication indicators (4), (6) in your

vehicle may flash, confirming comple

tion of the process.

While the HomeLink indicator light (7) is

flashing orange, press and release

-

("cycle") your device's hand-held remote

4

55

Features of your vehicle

Mirrors

every two seconds until the HomeLink

indicator light (7) changes from orange

to green. You may now release the

hand-held remote button. Then proceed

with "Programming a New HomeLink

Button" step 4.

Two-Way Communication functional

ity.

-

2. Operating HomeLink씾

OCV041608N

1) Operating HomeLink씾

僅 If the indicator (4) flashes in

Orange, it indicates that the garage

door is "Closing".

1. Press and release the desired pro

grammed HomeLink button (1, 2 or 3).

-

僅 The indicator (4) turns solid green

once the garage door has closed.

僅 If the indicator (6) flashes in

Orange, it indicates that the garage

door is "Opening".

僅 The indicator (6) turns solid green

once the garage door has fully

opened.

OCV041604N

NOTICE

僅 If the indicator (4) or (6) does not

turn to green, it indicates that the

last status of garage door was not

received properly. The HomeLink

mirror tries to receive the last

known status of the garage door

for a few seconds.

The HomeLink indicator (7) should light

green, solid or flashing, and your pro

grammed device should operate.

-

If your device does not operate, the

HomeLink programming was not suc

-

cessful, and you'll need to reprogram the

button.

3) Recalling Garage Door Status

2) Two-Way Communication Dis

play Behavior

-

HomeLink mirror with Two-Way Com

-

munication provides a way to view the

last stored message from the garage

door opener. In order to recall the last

known status of the last activated

device, press the buttons "1 and 2" OR "2

and 3" simultaneously.

1. Press and release one of the pro

-

grammed HomeLink buttons (1, 2 or

3)

僅 If the indicator (4) appears solid

Green, it indicates that the last acti

-

vated device was properly "closed".

僅 If the indicator (6) appears solid

Green, it indicates that the last acti

OCV041607N

-

2. The indicator (4) and (6) operates as

below, if your garage door opener has

vated device was properly "open".

4

56

Features of your vehicle

Mirrors

4. Now all three HomeLink buttons (1),

3. Erasing HomeLink씾 Buttons

(2) and (3) are cleared of any pro

-

gramming

1) Erasing and Reprogramming a

Single HomeLink씾 Button:

Information

HomeLink and the HomeLink House

logo are registered trademarks of Gen

tex Corporation.

1. Press and hold the desired HomeLink

button you want to re-program. DO

NOT release the button.

-

The myQ logo is a registered trademark

of The Chamberlain Group, Inc

2. The HomeLink indicator light (7) will

begin appear solid green. Release the

button as soon as the HomeLink indi

-

cator light (7) begins to flash orange,

usually about 20 seconds.

FCC (USA) and ISED (Canada)

This device complies with FCC rules part

3. Proceed with the steps in the "Pro

-

15 and Innovation, Science, and Eco

-

gramming a New HomeLink Button"

section.

nomic Development Canada RSS-210.

Operation is subject to the following two

conditions: (1) This device may not cause

harmful interference, and (2) This device

must accept any interference that may

be received including interference that

may cause undesired operation. WARN

ING: The transmitter has been tested

and complies with FCC and ISED rules.

4

NOTICE

If you do not complete the re-program

-

ming of a new device to the button, it will

revert to the previously stored program

ming.

-

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user's author

ity to operate the device.

2) The following instructions will

erase ALL HomeLink씾 program

ming from ALL buttons:

-

This equipment complies with FCC and

ISED radiation exposure limits set forth

for an uncontrolled environment. End

Users must follow the specific operating

instructions for satisfying RF exposure

compliance. This transmitter must be at

least 20 cm from the user and must not

OCV041609N_2

be co-located or operating in conjunc

tion with any other antenna or transmit

ter.

-

1. Press and hold the buttons (1) and (3)

simultaneously

-

2. The HomeLink indicator light (7) will

appear solid Orange for about 10 sec

-

onds

FCC (쉩tats-Unis) et ISED (Canada)

3. Release the buttons once the Home

Link indicator light (7) changes to

Green and flashes rapidly

-

Cet appareil est conforme aux r썟gle

-

ments de la FCC, section 15, et au CNR-

210 d'Innovation, Sciences et D썗veloppe

ment 썗conomique Canada. Le

-

4

57

Features of your vehicle

Mirrors

fonctionnement est assujetti aux deux

conditions suivantes: (1) cet appareil ne

doit pas causer d'interf썗rences nuisibles

et (2) cet appareil doit accepter toute

interf썗rence re썋ue, y compris celle qui

pourrait entra쎂ner un dysfonctionne

-

ment. MISE EN GARDE: L'썗metteur a

subi des tests et est conforme aux r썟gle

-

ments de la FCC et d'ISDE. Les change

-

ments ou modifications non approuv썗s

explicitement par la partie responsable

de la conformit썗 pourraient rendre

caduque l'autorisation de l'utilisateur de

se servir du dispositif.

Cet appareil est conforme aux limites

d'exposition aux radiations de la FCC et

d'ISDE 썗tablies pour un environnement

non contr쎦l썗. Les utilisateurs finaux

doivent respecter les instructions d'utili

-

sation sp썗cifiques pour satisfaire aux

exigences de conformit썗 aux expositions

de RF. L'썗metteur doit se trouver 쌽 20

cm au minimum de l'utilisateur et ne doit

pas 썛tre situ썗 au m썛me endroit que tout

autre 썗metteur ou antenne ni fonction

-

ner avec un autre 썗metteur ou antenne.

4

58

Features of your vehicle

Mirrors

HomeLink 5 Programing Flow Chart

4

59

Features of your vehicle

Mirrors

Outside rear view mirror

WARNING

Your vehicle is equipped with both left-

hand and right-hand outside rear view

mirrors.

Do not adjust or fold the outside rear

view mirrors while the vehicle is moving.

This could result in loss of control, and

an accident which could cause DEATH,

SERIOUS INJURY, or property damage.

Be sure to adjust the mirror angles

before driving.

The mirrors can be adjusted remotely

with the control levers or remote switch,

depending on the type of mirror control

installed. The mirror heads can be folded

Adjusting the outside rear view

mirrors

The electric remote control mirror switch

allows you to adjust the position of the

left and right outside rear view mirrors.

back to prevent damage during an auto

matic car wash or when passing through

a narrow street.

-

NOTICE

Rear view mirrors

僅 The outside rear view mirror is con

vex. Objects seen in the mirror are

closer than they appear.

-

ONQ5031026N

僅 Use your interior rear view mirror or

direct observation to determine the

actual distance of following vehicles

when changing lanes.

Adjusting the rear view mirrors:

1. Move the R or L switch (1) to select the

right side mirror or the left side mirror.

2. Press a corresponding point on the

mirror adjustment control (2) to posi

tion the selected mirror up, down, left

or right.

-

CAUTION

Do not scrape ice off the mirror face; this

may damage the surface of the glass. If

ice should restrict the movement of the

mirror, do not force the mirror for

adjustment. To remove ice, use a deicer

spray, or a sponge or soft cloth with

warm water.

CAUTION

僅 The mirrors stop moving when they

reach the maximum adjusting angles,

but the motor continues to operate

while the switch is pressed. Do not

press the switch longer than neces

-

sary, the motor may be damaged.

CAUTION

僅 Do not attempt to adjust the outside

rear view mirror glass by hand. You

may damage it.

If the mirror is jammed with ice, do not

adjust the mirror by force. Use an

approved spray de-icer (not radiator

antifreeze) to release the frozen mecha

nism or move the vehicle to a warm

place and allow the ice to melt.

-

4

60

Features of your vehicle

Mirrors

Folding the outside rear view mir

ror

-

Manual type

To fold the outside rear view mirror,

grasp the end of the mirror housing of

the mirror and pull it rearward and

inward.

ONQ5031027L

4

61

Features of your vehicle

Instrument cluster

Conventional cluster (Type A)

ONQ5A041100MX

Full LCD cluster (Type B)

ONQ5A041101MX

* The actual cluster in the vehicle may differ from the illustration.

1

Tachometer

2

3

4

5

6

7

8

9

Speedometer

Engine coolant temperature gauge

Fuel gauge

Odometer

Distance to empty

Transmission shift indicator

Outside temperature gauge

Warning and indicator lights

4

62

Features of your vehicle

Instrument cluster

Full LCD cluster (if equipped)

The full LCD type cluster provides two themes.

Type A

Type A is the basic theme of the full LCD type cluster and provides different graphic

styles depending on drive mode.

4

ONQ5A041102MX

Type B (Dynamic)

Type B is set by the user and provides digital display. The background screen

changes according to the weather and time.

ONQ5A041103MX

僅 Weather: sunny, cloudy, rainy, or snowy (4 types)

僅 Time: night, day, sunrise and sunset (4 types)

You can change the theme by selecting "Vehicle →Instrument Cluster Setting →

Theme Selection" on the menu.

4

63

Features of your vehicle

Instrument cluster

NOTICE

The information is displayed after get

-

ting information from a weather infor

mation provider via GPS. Depending on

conditions of GPS reception, the infor

-

mation may be different from the cur

-

ONQ5031476N

rent weather in your area.

A : illumination

僅 If the brightness reaches to the maxi

mum or minimum level, an alarm will

sound.

If no information is received via GPS

-

(e.g., not subscribed to Kia Connect ser

vice), the weather and time will be dis

played as 'sunny' or 'night' on the cluster.

-

Gauges

The gauges display various information

such as the speed of the vehicle, and so

on.

Adjusting instrument cluster illu

mination

-

The brightness of the instrument panel

illumination is changed by pressing the

illumination control button ("+" or "-")

when the ignition switch or ENGINE

START/STOP button is ON, or the tail

lamps are turned on.

Speedometer

Type A

ONQ5A041108MX

Type B (km/h, mph)

ONQ5031446N

ONQ5031526N_2

WARNING

The speedometer indicates the speed of

the vehicle and is calibrated in miles per

hour (mph) and kilometers per hour

(km/h).

Never adjust the instrument cluster

while driving. This could result in loss of

control and lead to an accident that may

cause DEATH, SERIOUS INJURY, or

property damage.

僅 If you hold the illumination control

button ("+" or "-"), the brightness will

be changed continuously.

4

64

Features of your vehicle

Instrument cluster

refer to "If the engine overheats" on

page 7-7.

Tachometer

Type A / Type B

WARNING

Never remove the radiator cap when the

engine is hot. The engine coolant is

under pressure and could severely burn.

Wait until the engine has cooled before

removing the cap.

ONQ5031479N_2

The tachometer indicates the approxi

-

mate number of engine revolutions per

minute (rpm).

Fuel gauge

Type A / Type B

Use the tachometer to select the correct

shift points and to prevent lugging and/

or over-revving the engine.

4

CAUTION

Do not operate the engine within the

tachometer's RED ZONE. This may cause

severe engine damage.

ONQ5031481CF_2

This gauge indicates the approximate

amount of fuel remaining in the fuel

tank.

Engine coolant temperature

gauge

NOTICE

Type A / Type B

僅 The fuel tank capacity is given in

"Recommended lubricants and capac

-

ities" on page 9-6.

僅 The fuel gauge is supplemented by a

low fuel warning light, which will

appear when the fuel tank is nearly

empty.

ONQ5031480N_2

This gauge indicates the temperature of

the engine coolant when the ENGINE

START/STOP button is ON.

僅 On inclines or curves, the fuel gauge

pointer may fluctuate or the low fuel

warning light may come on earlier

than usual due to the movement of

fuel in the tank.

CAUTION

If the gauge pointer moves beyond the

normal range area toward the "H" posi

tion, it indicates overheating that may

damage the engine.

-

WARNING

Fuel gauge

Running out of fuel can expose vehicle

occupants to danger.

Do not continue driving with an over

heated engine. If your vehicle overheats,

-

4

65

Features of your vehicle

Instrument cluster

You must stop and obtain additional fuel

as soon as possible after the warning

Distance to empty

Type A / Type B

light comes on or when the gauge indi

-

cator comes close to the "E" level.

CAUTION

Avoid driving with an extremely low fuel

level. Running out of fuel could cause

ONQ5031491CF_2

the engine to misfire, which could dam

-

age the catalytic converter.

僅 The distance to empty is the esti

-

mated distance the vehicle can be

driven with the remaining fuel.

NOTICE

- Distance range: 1~9,999 km or

1~9,999 miles.

The fuel display may not be accurate if

the vehicle is on an incline.

僅 If the estimated distance is below 1

mile (1 km), the trip computer will dis

play "---" as distance to empty.

-

Odometer

僅 If the level of the remaining fuel is

Type A / Type B

more than three-quarters, more than

3 liters (0.8 gallons) of fuel must be

refilled for the fuel gauge to change.

In other cases, more than 6 liters (1.6

gallons) of fuel must be refilled for the

vehicle to change the fuel gauge.

ONQ5031492CF_2

NOTICE

The odometer Indicates the total dis

-

僅 If the vehicle is not on level ground or

tance that the vehicle has been driven

and should be used to determine when

the battery power has been inter

-

rupted, the distance to empty function

may not operate correctly.

periodic maintenance should be per

formed.

-

僅 The distance to empty may differ

from the actual driving distance as it

is an estimate of the available driving

distance.

僅 Odometer range: 0~1,599,999 km or

999,999 miles.

僅 The trip computer may not register

additional fuel if less than 1.6 gallons

(6 liters) of fuel are added to the vehi

cle.

-

僅 The fuel economy and distance to

empty may vary significantly based

on driving conditions, driving habits,

and condition of the vehicle.

4

66

Features of your vehicle

Instrument cluster

Outside temperature gauge

Transmission shift indicator

Transmission shift indicator displays

gear information depending on your

vehicle's transmission type.

Type A

Automatic transmission shift indi

cator

-

Type A

ONQ5031454CF

Type B

ONQ5031490N

4

Type B

ONQ5A041104MX

This gauge indicates the current outside

air temperatures by 1 °C (1 °F).

僅 Temperature range: -40 °C~60 °C (-

40 °F~140 °F)

The outside temperature on the display

ONQ5A041105MX

may not change immediately like a gen

eral thermometer to prevent the driver

from being inattentive.

-

This indicator displays which automatic

transmission gear is selected.

僅 Park: P

To change the temperature unit (from °C

to °F or from °F to °C)

僅 Reverse: R

僅 Neutral: N

僅 Drive: D

The temperature unit can be changed

by using the "User Settings" mode of the

LCD Display.

Manual shift mode

僅 1/2/3/4/5/6/7/8

* For more details, refer to "User settings

mode" on page 4-71.

4

67

Features of your vehicle

LCD display

The LCD display modes can be changed

with the control buttons.

LCD Display Control

ONQ5031029N

1.

: MODE button for changing

modes

2.

/

: MOVE switch for changing

items

3. OK: SELECT/RESET button for setting

or resetting the selected item

4

68

Features of your vehicle

LCD display

LCD display modes

The LCD display provides 5 modes. You can switch modes by pressing the Mode but

-

ton.

Mode

Infomation / Master

Driving Assist

Trip Computer

Turn By Turn (TBT)*

User Settings

Warning

Forward Collision-Avoid

-

ance Assist

Lane Keeping Assist

Driving force distribu

-

Blind-Spot Collision-

Avoidance Assist*

Drive Information

Route Guidance

Destination Info

Driver Assistance*

tion (AWD)^*

Smart Cruise Control*

Lane Following Assist

Driver Attention Warning

Since Refueling

Accumulated Info

AUTO STOP*

Cluster

Lights*

TPMS

4

Up/

Down

The Master Warning

Door*

mode displays warning

messages related to

the vehicle when one or

more systems is not

operating normally.

Digital Speedometer^*

Convenience*

Units

Language

Reset

The information provided may differ depending on which functions are applicable to

your vehicle.

* : if equipped

NOTICE

Keep the engine running when configur

ing the display settings to prevent the

battery from discharging.

-

4

69

Features of your vehicle

LCD display

Trip computer mode

Driving Assist mode

ONQ5A041107MX

This mode displays the state of:

僅 Lane Safety

ONQ5A043113N1

A: Drive info

1

Accumulated trip distance

Total driving time

僅 Smart Cruise Control

僅 Driver Attention Warning

2

3

Average fuel efficiency

The trip computer mode displays infor

-

Information mode

mation related to vehicle driving param

eters including fuel economy, tripmeter

information and timer.

-

* For more details, refer to "Trip informa

-

tion (trip computer)" on page 4-77.

Turn By Turn (TBT) mode

OCV041126L

A: Low tire pressure

This mode displays the state of:

僅 Speedometer

僅 Engine temperature

僅 Tire pressure

ONQ5A041106MX

僅 AWD traction (if equipped)

This mode displays the state of the navi

-

gation.

Tire pressure status

This mode displays information related

to Tire Pressure.

* For more details, refer to "Tire Pressure

Monitoring System (TPMS) (if

equipped)" on page 7-8.

4

70

Features of your vehicle

LCD display

Master warning mode

User settings mode

ONQ5031140N

ONQ5031372L

This warning light informs the driver the

following situations.

In this mode, you can change the set-

tings of the instrument cluster, doors,

lamps, etc.

僅 LED headlamp malfunction

僅 Lamp malfunction

1. Driver Assistance

2. Cluster

僅 High Beam Assist malfunction (if

equipped)

3. Lights

At this time, a Master Warning icon

4. Sound

4

5. Door

(

) will appear beside the User Set

-

6. Convenience

7. Service Interval

8. Units

tings icon ( ), on the LCD display. If

the warning situation is solved, the mas

ter warning light will be turned off and

the Master Warning icon will disappear.

-

9. Reset

The information provided may differ

depending on which functions are appli

cable to your vehicle.

-

4

71

Features of your vehicle

LCD display

1. Driver Assistance

Items

Explanation

僅

Speed Limit Offset

To adjust the Speed Limit Offset

Speed Limit*

僅

Speed Limit Assist/Speed Assist Warning/Off

To select the function of Intelligent Speed Limit Assist

* For more details, refer to "Intelligent Speed Limit Assist (ISLA)" on page 6-46.

僅

Standard/Late

To select the Warning Timing

Warning Volume (High/Medium/Low)

To adjust the Warning Volume

Haptic Warning (If equipped)

To activate or deactivate Haptic Warning

Lane Safety Audible Warning Off

Warning Timing

僅

Warning Methods

僅

To activate or deactivate Lane Safety Audible Warning

* For more details, refer to "Lane Keeping Assist (LKA)" on page 6-25.

僅

Leading Vehicle Departure Alert

Inattentive Driving Warning

Driver Attention Warning

Forward Safety

To activate or deactivate Driver Attention Warning

* For more details, refer to "Driver Attention Warning (DAW)" on page 6-52.

To adjust Forward Collision-Avoidance Assist.

僅

Active Assist/Warning Only/Off

To select the functions

* For more details, refer to "Forward Collision-Avoidance Assist (FCA) (Front Camera Only) (if

equipped)" on page 6-4, "Forward Collision-Avoidance Assist (FCA) (Sensor Fusion) (if equipped)"

on page 6-13

To adjust Lane Keeping Assist

僅

Assist/Warning Only/Off

Lane Safety

To select the functions

* For more details, refer to "Lane Keeping Assist (LKA)" on page 6-25.

僅

Blind-Spot View

Safe Exit Warning

To activate or deactivate Safe Exit Warning.

Blind-Spot Safety

* For more details, refer to "Safe Exit Warning (SEW) (if equipped)" on page 6-40.

僅

Active Assist/Warning Only/Off

* For more details, refer to "Blind-Spot Collision-Avoidance Assist (BCA) (if equipped)" on page 6-30.

僅

Parking Distance Warning Auto On

Rear Cross-Traffic Safety

To activate or deactivate Rear Cross-Traffic Collision-Avoidance Assist.

Rear Active Assist / Rear Warning Only /Off

僅

Parking Safety

* For more details, refer to "Rear Cross-Traffic Collision-Avoidance Assist (RCCA) (if equipped)" on page

6-95.

* For more details, refer to "Reverse Parking Collision-Avoidance Assist (PCA) (if equipped)" on page 6-

110.

* The information provided may differ depending on which systems are applicable to

your vehicle.

4

72

Features of your vehicle

LCD display

2. Cluster

Items

Explanation

僅

Link to Drive Mode

Theme A/Theme B/Theme C/Dynamic

Theme Selection

Wiper/Lights Display

Traffic Signs

Activate

Icy Road Warning

Cluster Voice Guidance Volume

Welcome Sound

僅

0~3 Level

Activate

3. Lights

Items

Explanation

僅

1~20Level

Illumination

4

To adjust the instrument cluster illumination.

僅

Off: The one touch turn signal function will be deactivated.

3, 5, 7 flashes: The turn signal indicator will blink 3, 5, or 7 times

when the turn signal lever is moved slightly.

One Touch Turn Signal

* For more details, refer to "Lighting" on page 4-93.

Headlamp Delay

High Beam Assist

If this item is checked, the headlamp delay function will be activated.

If this item is checked, High Beam Assist will be activated.

* The information provided may differ depending on which functions are applicable

to your vehicle.

4

73

Features of your vehicle

LCD display

4. Door

Items

Explanation

僅

Enable on shift (for Automatic transmission): All doors will be automatically locked if the vehicle is

shifted from the P (Park) position to the R (Reverse), N (Neutral), or D (Drive) position.

(With the Engine ON, it is activated.)

Automatically Lock

僅

Enable on speed (for Automatic transmission): All doors will be automatically locked when the vehicle

speed exceeds 15 km/h (9.3 mph)

Off: The auto door unlock operation will be canceled.

* If the setting is changed while the vehicle is in motion, the changed setting may not immediately operate.

僅

On shift to P (for Automatic transmission): All doors will be automatically unlocked if the gear is shifted

from R (Reverse), N (Neutral), or D (Drive position to P (Park) position. (With the Engine ON, it is acti

-

vated.)

Automatically Unlock

僅

Vehicle Off: All doors will be automatically unlocked when the ignition key is removed from the ignition

switch or the ENGINE START/STOP button is set to the OFF position.

Off: The auto door unlock operation will be canceled.

If this item is checked, the two press unlock will be activated. Press the door unlock button once to unlock

the driver's door, and press the button once more within 4 seconds to unlock the rest of the doors.

2 Press Unlock

Power Liftgate

If this item is checked, Power Liftgate will be activated.

僅

Normal/Fast

To adjust the power liftgate speed.

Level 1/Level 2/Level 3/Full Open/User Height Setting

Power Liftgate Open

-

ing Speed

僅

Power Liftgate Open

-

To select the height.

ing Height

* For more details, refer to "Power liftgate (if equipped)" on page 4-26.

To activate or deactivate the Smart Liftgate.

Smart Liftgate

* For more details, refer to "Smart Liftgate with Auto Open (if equipped)" on page 4-31.

* The information provided may differ depending on which systems are applicable to

your vehicle.

5. Convenience

Items

Explanation

僅

Off/Normal/Extended

To select the seat movement

If this item is checked, the Rear Occupant Alert (ROA) display will be activated.

On Door Unlock/On Driver Approach

Seat Easy Access

Rear Occupant Alert

Welcome Light

僅

To select the welcome mirror/light function.

If this item is checked, Welcome Mirror/Light will be activated.

Activate

Welcome Mirror/Light

Wireless Charging System

If this item is checked, the Auto Rear Wiper will be activated when the front wiper is On

and the gear is selected in R (Reverse).

Auto Rear Wiper (in R)

* The information provided may differ depending on which functions are applicable

to your vehicle.

4

74

Features of your vehicle

LCD display

6. Units

Items

Explanation

僅

km/h, mph

To select the Speedometer unit.

L/100 km, US gallon, UK gallon

To select the Fuel economy unit.

Speedometer Unit

僅

Fuel Economy Unit

For more details, refer to "Trip information (trip computer)" on

page 4-77.

僅

°C/°F

To select the Temperature unit.

psi, kPa, bar

To select the Tire Pressure Unit

Temperature Unit

Tire Pressure Unit

僅

* The information provided may differ depending on which functions are applicable

to your vehicle.

4

7. Language

Items

Explanation

Language

To select the language.

8. Reset

Items

Reset

Explanation

You can reset the menus in the User Settings

mode. All menus in the User Settings mode are

reset to factory settings, except language and

service interval.

4

75

Features of your vehicle

LCD display

Driver Assistance settings (info

tainment system) (if equipped)

-

Vehicle settings (infotainment

system) (if equipped)

ONQ5E041406L

select Settings

→

Vehicle

→

Driver

1. Press the Settings button on the head

Assistance on the infotainment system

screen to set the Driver Assistance func

tion.

unit of the infotainment system.

-

2. Select Vehicle and change the setting

of the features.

僅

Driver assistance

Vehicle Settings in the infotainment sys

tem provides user options for a variety

of settings including door lock/unlock

features, convenience features, driver

assistance settings, etc.

-

Driving Convenience

Speed Limit

Warning Timing

Warning Volume

Driver Attention Warning

Forward Safety

Lane Safety

僅

Vehicle Settings

-

Driver Assistance

Cluster

Climate

Blind-Spot Safety

Parking Safety

Seat

Lights

INFORMATION

Door

The infotainment system may change

after software updates. For more infor

mation, refer to the user’s manual pro

vided in the infotainment system and

the quick reference guide.

Convenience

-

WARNING

Do not operate the Vehicle settings

while driving. This may cause distraction

resulting in an accident.

NOTICE

The information provided may differ

depending on which features are appli

cable to your vehicle.

-

4

76

Features of your vehicle

LCD displays

1. Drive Info

LCD displays

2. Since Refueling

LCD displays show the following infor

-

mation to drivers.

3. Accumulated Info

4. AUTO STOP (if equipped)

5. Digital Speedometer

僅 Trip information

僅 LCD modes

僅 Warning messages

Fuel economy

Trip information (trip computer)

This information is always displayed at

The trip computer is a microcomputer-

controlled driver information system

that displays information related to driv

ing.

the bottom center of the Full LCD clus

-

ter.

-

Average Fuel Economy (1)

NOTICE

Some driving information stored in the

trip computer resets if the battery is dis

4

-

connected.

ONQ5031486CF

Trip modes

1

Average fuel economy

Instant fuel economy

2

僅 The average fuel economy is calcu

lated by the total driving distance and

fuel consumption since the last aver

-

age fuel economy resets.

- Fuel economy range: L/100 km or

0~99.9 mpg

NOTICE

The average fuel economy is not dis

-

played for more accurate calculation if

the vehicle does not drive more than 10

seconds or 50 m (0.03 miles) since the

ignition switch or ENGINE START/STOP

button is turned to ON.

Instant Fuel Economy (2)

僅 This mode displays the instant fuel

economy during the last few seconds

when the vehicle speed is more than

10 km/h (6.2 mph).

ONQ5051138N

To change the trip mode, toggle the

switch (

/

) on the steering wheel.

4

77

Features of your vehicle

LCD displays

- Fuel economy range:

0.0~30 km/L, L/100 km or

0.0~50.0 mpg

Accumulated driving information

mode

ONQ5A043113N1

This display shows the accumulated trip

distance, the average fuel efficiency, and

the total driving time.

A: Drive info

1

Accumulated trip distance

Total driving time

2

3

Average fuel efficiency

僅 Fuel efficiency is calculated after the

vehicle has run for more than 300 m

(0.19 miles).

僅 The information will automatically

reset when the driver's door is opened

after the ignition is turned off, or

approximately 3 minutes have passed

after the ignition is turned off.

ONQ5A043114N2

A: Accumulated info

1

Accumulated trip distance

Total driving time

2

3

僅 If the engine is running, even when

Average fuel efficiency

the vehicle is not in motion, the infor

-

僅 Accumulated information is calculated

after the vehicle has run for more

than 300 m (0.19 miles).

mation will be accumulated.

Information since refueling

僅 If you press "OK" button for more than

1 second after the Cumulative Infor

-

mation is displayed, the information

will be reset.

僅 If the engine is running, even when

the vehicle is not in motion, the infor

-

mation will be accumulated.

ONQ5A043116N3

Drive Info display

A: Since refueling

This display shows the trip distance (1),

the average fuel efficiency (2), and the

total driving time (3) information once

per one ignition cycle.

1

Accumulated trip distance

Total driving time

2

3

Average fuel efficiency

This display shows the trip distance, the

average fuel efficiency, and the instant

fuel efficiency (or the total driving time)

since refueling.

4

78

Features of your vehicle

LCD displays

僅 Information since refueling is calcu

lated after the vehicle has run for

more than 300 m (0.19 miles).

-

Digital speedometer

This digital speedometer display shows

the speed of the vehicle.

僅 If you press "OK" button for more than

1 second after the information since

refueling is displayed, the information

will be reset.

僅 If the engine is running, even when

the vehicle is not in motion, the infor

mation will be accumulated.

-

ONQ5031105K

Service mode

NOTICE

This mode reminds you of scheduled

maintenance information.

The vehicle must be driven for a mini

mum of 300 m (0.19 miles) since the last

ignition cycle before the average accu

-

4

mulated driving information is recalcu

-

lated.

AUTO STOP (if equipped)

OCV041124L

A: Service Interval

1. Service interval schedule

Service Interval

It calculates and displays when you need

ONQ5E031389L

a scheduled maintenance service (mile

-

age or days).

A: Timer

If the remaining mileage or time reaches

1,500 km (900 miles) or 30 days, "Ser

vice interval" message is displayed for

several seconds each time you set the

ignition switch or ENGINE START/STOP

Button to the ON position.

AUTO STOP display shows the elapsed

time of engine stop by Idle Stop and Go

(ISG) system.

-

If the ISG does not operate, the reason

for the non-operation is displayed. (if

equipped)

Service required

For more details, refer to "Idle Stop and

Go (ISG) system" on page 5-45.

If you do not have your vehicle serviced

according to the already input service

interval, "Service required" message is

displayed for several seconds each time

you set the ignition switch or ENGINE

START/STOP Button to the ON position.

To reset the service interval to the mile

-

age and days you input before:

4

79

Features of your vehicle

LCD displays

僅 Select 'Vehicle settings → Service

Interval → Reset'.

Lights mode

NOTICE

If any of the following conditions occur,

the mileage and days may be incorrect.

僅 The battery cable is disconnected.

僅 The battery is discharged.

ONQ5041286L

A: Lights

1

LCD display messages

2

3

4

AUTO

Door, hood, liftgate, sunroof

open

OFF (O)

This indicator displays which exterior

light is selected using the lighting con

trol.

-

You can activate or deactivate Wiper/

Lights Display function from the User

Settings mode in the cluster LCD display.

ONQ5031124_2

A, B: Door, hood, liftgate, sunroof open

Wiper mode

僅 This warning is displayed indicating

which door, the hood, the liftgate or

the sunroof is open.

Low pressure warning display

ONQ5041287L

A: Front Wiper

1

OFF

AUTO

LO

2

3

4

OCV041126L

HI

A: Low tire pressure

This indicator displays which wiper

speed is selected using the wiper con

trol.

This warning message is displayed if the

tire pressure is low. The corresponding

tire on the vehicle will appear.

-

You can activate or deactivate Wiper/

Lights Display function from the User

Settings mode in the cluster LCD display.

* For more details, refer to "Tire Pressure

Monitoring System (TPMS) (if

equipped)" on page 7-8.

4

80

Features of your vehicle

LCD displays

Low washer fluid (if equipped)

Engine overheated

僅 This warning message appears when

the engine coolant temperature is

above 120 °C (248 °F). This means

that the engine is overheated and

may be damaged.

* If your vehicle is overheated, refer to "If

the engine overheats" on page 7-7.

ONQ5031499N

This warning message is displayed if the

washer fluid level in the reservoir is

nearly empty.

Low engine oil

僅 This warning message appears when

the engine oil level is insufficient.

Have the washer fluid reservoir refilled.

僅 Refill the engine oil.

Icy road warning

*For more details, refer to "Engine oil

and filter" on page 8-12

4

WARNING

When the engine oil level warning light

occurs, it is necessary to check whether

maintenance schedule (Engine oil

replacement) in owner's manual has

been followed before replenishing the

oil, and if not followed, the engine oil

must be replaced first.

ONQ5031500N

This warning is to warn the driver the

road may be icy.

When the following conditions occur, the

warning light (including outside tem

-

perature gauge) blinks 5 times and then

appears, and also warning chime sounds

once.

Engine oil change due soon.

Reset oil life after oil change

僅 The temperature on the outside tem

-

僅 This warning message appears when

the remaining engine oil life reaches

5% or below.

perature gauge is below approxi

-

mately 4 °C (40 °F).

僅 Replace engine oil from an authorized

NOTICE

Kia dealer. After that, select 'Conve

-

If the icy road warning appears while

driving, you should drive more atten

tively and safely refraining from over-

speeding, rapid acceleration, sudden

braking or sharp turning, etc.

nience → Oil Change Reminder' from

the User Settings menu on the cluster

or 'Vehicle → Cluster → Oil Change

Reminder’ from Settings menu on the

infotainment system screen to reset

the remaining oil life.

-

*For more details, refer to "Engine oil

and filter" on page 8-12

4

81

Features of your vehicle

LCD displays

Engine oil change due now. Reset

oil life after oil change

Check steering wheel lock system

(for smart key system)

僅 This warning message appears when

the remaining engine oil life reaches

1% or below.

僅 This warning message appears if the

steering wheel does not lock normally

when the ENGINE START/STOP But

ton changes to the OFF position.

-

僅 Replace engine oil immediately from

an authorized Kia dealer. After that,

select 'Convenience → Oil Change

Reminder' from the User Settings

menu on the cluster or 'Vehicle →

Cluster → Oil Change Reminder’ from

Settings menu on the infotainment

system screen to reset the remaining

oil life.

Key not in vehicle (for smart key

system)

僅 This warning message appears if the

smart key is not in the vehicle when

you press the ENGINE START/STOP

Button.

僅 It means that you should always have

the smart key with you.

*For more details, refer to "Engine oil and

filter" on page 8-12

Key not detected (for smart key

system)

Low key battery (for smart key

system)

僅 This warning message appears if the

smart key is not detected when you

僅 This warning message appears if the

battery of the smart key is discharged

when the ENGINE START/STOP But

press the ENGINE START/STOP But

-

ton.

ton changes to the OFF position.

Shift to P or N to start engine (for

smart key system)

Press START button while turn

ing wheel (for smart key system)

-

僅 This warning message appears if you

try to start the engine with the gear

僅 This warning message appears if the

steering wheel does not unlock nor

mally when the ENGINE START/STOP

Button is pressed.

-

not in the P (Park) or N (Neutral) posi

-

tion.

僅 It means that you should press the

ENGINE START/STOP Button while

turning the steering wheel right and

left.

Press brake pedal to start engine

(for smart key system)

僅 This warning message appears if the

ENGINE START/STOP Button changes

to the ACC position twice by pressing

the button repeatedly without

Steering wheel not locked (for

smart key system)

depressing the brake pedal.

僅 This warning message appears if the

steering wheel does not lock when the

ENGINE START/STOP Button changes

to the OFF position.

僅 It means that you should depress the

brake pedal to start the engine.

4

82

Features of your vehicle

Warning and indicator lights

Battery discharging due to exter

nal electrical devices

-

Warning and indicator lights

The warning light and indicator light

indicate a situation where the driver

should be careful and whether the vari

The vehicle can detect self-discharge of

the battery due to over-current that is

generated by unauthorized electrical

devices such as dashboard camera

(dash cam) mounting during parking.

-

ous functions are activated.

Warning lights

The warning light indicates situations

that require the driver to pay attention.

If the warning continues even after

external electrical devices are removed,

have your vehicle inspected by an

authorized Kia dealer.

NOTICE

Warning lights

Make sure that all warning lights are

OFF after starting the engine. If any light

is still ON, this indicates a situation that

needs attention.

Press START button again (for

smart key system)

4

僅 This warning message appears if you

can not operate the ENGINE START/

STOP Button when there is a problem

with the ENGINE START/STOP Button

system.

Air bag warning light

This warning light appears:

僅 It means that you could start the

engine by pressing the ENGINE

START/STOP button once more.

僅 Once you set the ignition switch or

ENGINE START/STOP Button to the

ON position.

僅 If the warning appears each time you

- It appears for approximately 3~6

seconds and then goes off.

press the ENGINE START/STOP But

ton, have the vehicle inspected by an

authorized Kia dealer.

-

僅 When there is a malfunction with the

SRS. In this case, have the vehicle

inspected by an authorized Kia dealer.

Press START button with key (for

smart key system)

僅 This warning message appears if you

Seat belt warning light

press the ENGINE START/STOP But

-

ton while the warning message "Key

not detected" is appeared.

This warning light informs the

driver that the seat belt is not fas

tened.

-

僅 At this time, the immobilizer indicator

light blinks.

* For more details, refer to "Seat belts" on

page 3-17.

4

83

Features of your vehicle

Warning and indicator lights

With only one of the dual systems work

ing, more than normal pedal travel and

greater pedal pressure are required to

stop the vehicle.

-

Parking brake & brake fluid

warning light

This warning light appears:

Also, the vehicle will not stop in as short

a distance with only a portion of the

brake system working.

僅 Once you set the ignition switch or

ENGINE START/STOP Button to the

ON position.

If the brakes fail while you are driving,

shift to a lower gear for additional

engine braking and stop the vehicle as

soon as it is safe to do so.

- It appears for approximately 3 sec

onds

-

- It remains on if the parking brake is

applied.

NOTICE

僅 When the parking brake is applied.

Parking brake & brake fluid warning

light

僅 When the brake fluid level in the res

ervoir is low.

-

Driving the vehicle with a warning light

ON is dangerous. If the Parking Brake &

Brake Fluid Warning Light appears with

the parking brake released, it indicates

that the brake fluid level is low.

- If the warning light appears with

the parking brake released, it indi

cates the brake fluid level in reser

-

voir is low.

In this case, have your vehicle inspected

by an authorized Kia dealer.

If the brake fluid level in the res

ervoir is low:

-

1. Drive carefully to the nearest safe

location and stop your vehicle.

Anti-lock brake system (ABS)

warning light

2. With the engine stopped, check the

brake fluid level immediately and add

fluid as required (For more details,

refer to "Brake fluid" on page 8-13).

Then check all brake components for

fluid leaks. If any leak on the brake

system is still found, the warning light

remains on, or the brakes do not

operate properly, do not drive the

vehicle.

This warning light appears:

僅 Once you set the ignition switch or

ENGINE START/STOP button to the

ON position.

- It appears for approximately 3 sec

onds and then goes off.

-

僅 When there is a malfunction with the

ABS (The normal braking system will

still be operational without the assis

In this case, have your vehicle towed

to an authorized Kia dealer and

inspected.

-

tance of the anti-lock brake system).

In this case, have the vehicle

inspected by an authorized Kia dealer.

Dual-diagonal braking system

Your vehicle is equipped with dual-diag

onal braking systems. This means you

still have braking on two wheels even if

one of the dual systems should fail.

-

4

84

Features of your vehicle

Warning and indicator lights

Electronic Brake Force Distribu

tion (EBD) system warning light

-

NOTICE

Electronic Parking Brake (EPB) warn

-

ing light

The Electronic Parking Brake (EPB)

warning light may appear when the

Electronic Stability Control (ESC) Indica

tor Light comes on to indicate that the

ESC is not working properly (This does

not indicate malfunction of the EPB).

These two warning lights appear

at the same time while driving:

-

僅 When the ABS and regular brake sys

-

tem are not working, have your vehi

cle inspected by an authorized Kia

dealer.

-

WARNING

Electric Power Steering (EPS)

warning light

Electronic Brake Force Distribution

(EBD) system warning light

4

When both ABS and parking brake &

brake fluid warning lights are on, the

brake system will not work normally and

you may experience an unexpected and

dangerous situation during sudden

braking.

This warning light appears:

僅 Once you set the ignition switch or

ENGINE START/STOP Button to the

ON position.

- This indicator light comes on after

the ignition switch or ENGINE

START/STOP button is in the ON

position and then goes out after

approximately 3 seconds.

In this case, avoid high speed driving

and abrupt braking.

Have your vehicle inspected by an

authorized Kia dealer as soon as possi

ble.

-

僅 When there is a malfunction with the

EPS.

In this case, have the vehicle

inspected by an authorized Kia dealer.

Electronic Parking Brake (EPB)

(3%

warning light

(if equipped)

Charging system warning light

This warning light appears:

僅 Once you set the ignition switch or

ENGINE START/STOP button to the

ON position.

This warning light appears:

僅 Once you set the ignition switch or

ENGINE START/STOP button to the

ON position.

- It appears for approximately 3 sec

onds and then goes off.

-

僅 When there is a malfunction with

either the alternator or electrical

charging system.

僅 When there is a malfunction with the

EPB.

In this case, have the vehicle

inspected by an authorized Kia dealer.

4

85

Features of your vehicle

Warning and indicator lights

If there is a malfunction with

either the alternator or electrical

charging system:

CAUTION

If the oil pressure lowers due to insuffi

cient engine oil, etc., the engine oil pres

sure warning light turns on and an

enhanced engine protection system that

limits the engine's power is activated.

After that, engine warning light turns on

if driving repeatedly and continuously.

-

1. Drive carefully to the nearest safe

location and stop your vehicle.

2. Turn the engine off and check the

alternator drive belt for looseness or

breakage.

In this case, have the vehicle

inspected by an authorized Kia dealer.

CAUTION

If the Malfunction Indicator Lamp (MIL)

appears, potential catalytic converter

damage is possible which could result in

loss of engine power. In this case, have

the vehicle inspected by an authorized

Kia dealer.

Malfunction Indicator Lamp (MIL)

This warning light appears:

僅 When you set the ignition switch or

the ENGINE START/STOP button to

the ON position.

Engine oil pressure warning light

This warning light appears:

- The malfunction indicator light

appears for about 3 seconds and

then goes off.

僅 Whenever there is a malfunction with

either the emission control system or

the engine or the vehicle powertrain.

僅 Once you set the ignition switch or

ENGINE START/STOP Button to the

ON position.

If this occurs, have the vehicle

inspected by an authorized Kia dealer.

- It remains on until the engine is

started.

CAUTION

僅 When the engine oil pressure is low.

Malfunction Indicator Lamp (MIL)

If the engine pressure is low:

僅 Driving with the Malfunction Indicator

Lamp (MIL) on may cause damage to

the emission control systems which

could effect drivability and/or fuel

economy.

僅 Drive carefully to the nearest safe

location and stop your vehicle.

僅 Turn the engine off and check the

engine oil level (For more details, refer

to "Engine oil and filter" on page 8-

12“). If the level is low, add oil as

required.

僅 If the enhanced engine protection

system becomes activated due to lack

of engine oil, engine power will be lim

-

ited. If such condition continues

repeatedly, the Malfunction Indicator

Lamp will appear.

僅 If the warning light remains on after

adding oil or if oil is not available,

have the vehicle inspected by an

authorized Kia dealer. Continued driv

-

4

86

Features of your vehicle

Warning and indicator lights

ing with the warning light on may

cause engine failure.

僅 When this warning light appears, it

may turn off after driving the vehicle:

- The vehicle should be driven for

more than 30 minutes at a speed of

80 km/h (50 mph) and faster.

NOTICE

僅 When engine oil pressure decreases

due to insufficient engine oil, etc., the

Engine Oil Pressure warning light will

appear.

- Ensure the following conditions are

all met: safe road conditions, trans

-

mission 3rd gear or above, and

engine speed of 1,500 - 4,000 rpm.

僅 The enhanced engine protection sys

-

tem which limits engine power will be

activated. If the engine oil pressure is

restored, the Engine Oil Pressure

warning light and the enhanced

If this warning light blinks in spite of the

procedure (at this time the LCD warning

message will be displayed), have the

GPF system checked by an authorized

Kia dealer.

engine protection system will turn off.

僅 When the engine oil pressure is

restored, the warning light and the

enhanced engine protection system

will turn off after the engine is

restarted.

4

CAUTION

Gasoline engine with GPF (if

equipped)

If you continue to drive with the GPF

warning light blinking for a long time,

the GPF system can be damaged and

fuel consumption can worsen.

CAUTION

Engine overheating

Do not continue driving with the engine

overheated. Otherwise, the engine may

be damaged.

Low fuel level warning light

CAUTION

This warning light appears:

When the fuel tank is nearly empty.

Engine damage

If the engine is not stopped immediately

after the engine oil pressure warning

light appears and stays on while the

If the fuel tank is nearly empty:

Add fuel as soon as possible.

engine is running, serious engine dam

age may result.

-

CAUTION

Low fuel level

Driving with the Low Fuel Level warning

light on or with the fuel level below "E"

can cause the engine to misfire and

damage the catalytic converter.

Exhaust system (GPF) warning

light (Gasoline Engine)

This warning light appears:

僅 When there is a malfunction with Gas

oline Particulate Filter (GPF) system.

-

4

87

Features of your vehicle

Warning and indicator lights

In this case, have the vehicle

inspected by an authorized Kia dealer.

Master warning light

* For more details, refer to "Tire Pressure

Monitoring System (TPMS) (if

equipped)" on page 7-8.

This indicator light appears:

僅 This warning light informs the driver

the following situations

WARNING

- LED headlamp malfunction (if

equipped)

Low tire pressure

僅 Significantly low tire pressure makes

- Lamp malfunction

the vehicle unstable and can contrib

ute to loss of vehicle control and

increased braking distances.

-

- High Beam Assist malfunction (if

equipped)

To identify the details of the warning

look at the LCD display.

僅 Continued driving with low pressure

tires will cause the tires to overheat

and fail.

If the warning situation is solved, the

master warning light will turn off.

WARNING

Low tire pressure warning light

(if equipped)

Safe stopping

僅 The TPMS cannot alert you about

severe and sudden tire damage

caused by external factors.

This warning light appears:

僅 Once you set the ignition switch or

ENGINE START/STOP button to the

ON position.

僅 If you notice any vehicle instability,

immediately take your foot off the

accelerator pedal, apply the brakes

gradually with light force, and slowly

move to a safe position off the road.

- It appears for approximately 3 sec

onds and then goes off.

-

僅 When one or more of your tires are

significantly under inflated. (The loca

-

tion of the underinflated tires are dis

played on the LCD display).

-

LED headlamp warning light

This warning light appears:

* For more details, refer to "Tire Pressure

Monitoring System (TPMS) (if

equipped)" on page 7-8.

僅 Once you set the ENGINE START/

STOP button to the ON position.

- It appears for approximately 3 sec

onds and then goes off.

-

This warning light remains on

after blinking for approximately

60 seconds or repeats blinking on

and off at the intervals of

僅 When there is a malfunction with the

LED headlamp.

In this case, have the vehicle inspected

by an authorized Kia dealer.

approximately 3 seconds:

僅 When there is a malfunction with the

TPMS.

4

88

Features of your vehicle

Warning and indicator lights

This warning light blinks:

All Wheel Drive (AWD) warning

僅 When there is a malfunction with a

LED headlamp related part.

light

(if equipped)

In this case, have the vehicle inspected

by an authorized Kia dealer.

This warning light appears:

僅 Once you set the ignition switch or

ENGINE START/STOP button to the

ON position.

CAUTION

LED headlamp warning light

- It appears for approximately 3 sec

onds and then goes off.

-

Continuous driving with the LED Head

lamp Warning Light on or blinking can

reduce LED headlamp (low beam) life.

-

僅 When there is a malfunction with the

AWD.

In this case, have your vehicle

inspected by an authorized Kia dealer.

Forward Safety warning light

(if equipped)

Indicator lights

4

Electronic stability control (ESC)

indicator light

This indicator light appears:

僅 When there is a malfunction with For

ward Collision-Avoidance Assist.

-

In this case, have the vehicle inspected

by an authorized Kia dealer.

This indicator light appears:

僅 Once you set the ignition switch or

ENGINE START/STOP Button to the

ON position.

* For more details, refer to "Forward Col

lision-Avoidance Assist (FCA) (Front

Camera Only) (if equipped)" on page

6-4."Forward Collision-Avoidance

Assist (FCA) (Sensor Fusion) (if

equipped)" on page 6-13

-

- It appears for approximately 3 sec

onds and then goes off.

-

僅 When there is a malfunction with the

ESC system.

In this case, have the vehicle

inspected by an authorized Kia dealer.

Icy road warning light

equipped)

(if

This warning light is to warn the driver

This indicator light blinks:

the road may be icy. When the tempera

ture on the outside temperature gauge

is approximately below 4 °C (39 °F) the

Icy road warning light and outside tem

perature gauge blinks and then appears.

Also, the warning chime sounds 1 time.

-

While the ESC is operating.

* For more details, refer to "Electronic

Stability Control (ESC) system" on

page 5-35.

-

4

89

Features of your vehicle

Warning and indicator lights

Electronic stability control (ESC)

OFF indicator light

AUTO HOLD indicator light

(AUTO HOLD) (if equipped)

This indicator light appears:

僅

White When you activate the auto

hold system by pressing the AUTO

HOLD button.

僅 Once you set the ignition switch or

ENGINE START/STOP Button to the

ON position.

Green When you stop the vehicle

completely by depressing the brake

pedal with the auto hold system acti

vated.

- It appears for approximately 3 sec

onds and then goes off.

-

僅 When you deactivate the ESC system

by pressing the ESC OFF button.

僅

Yellow When there is a malfunction

* For more details, refer to "Electronic

Stability Control (ESC) system" on

page 5-35.

with the auto hold system. In this case,

have the vehicle inspected by an

authorized Kia dealer.

* For more details, refer to "AUTO HOLD

(if equipped)" on page 5-31.

Auto Stop indicator light

This indicator will appear when the

engine enters the Idle Stop mode of ISG

(Idle Stop and Go) system.

Immobilizer indicator light (with

out smart key) (if equipped)

-

When the automatic starting occurs, the

auto stop indicator on the cluster will

blink for 5 seconds.

This indicator light appears:

僅 When the vehicle detects the immobi

lizer in your key properly while the

ignition switch is ON.

-

* For more details, refer to "Idle Stop and

Go (ISG) system" on page 5-45.

- At this time, you can start the

engine.

NOTICE

When the engine automatically starts by

ISG system, some warning lights (ABS,

ESC, ESC OFF, EPS or Parking brake

- The indicator light goes off after

starting the engine.

warning light) may turn on for a few sec

onds. This happens because of the low

battery voltage. It does not mean the

system is malfunctioning.

-

This indicator light blinks:

僅 When there is a malfunction with the

immobilizer system.

In this case, have the vehicle

inspected by an authorized Kia dealer.

4

90

Features of your vehicle

Warning and indicator lights

In this case, have the vehicle

inspected by an authorized Kia dealer.

Immobilizer indicator light (with

smart key)

This indicator light appears for

up to 30 seconds:

Turn signal indicator light

This indicator light blinks:

僅 When the vehicle detects the smart

key in the vehicle properly while the

ENGINE START/STOP button is ACC

or ON.

僅 When you turn the turn signal light on.

If any of the following occurs, there may

be a malfunction with the turn signal

system. In this case, have the vehicle

inspected by an authorized Kia dealer.

- At this time, you can start the

engine.

- The indicator light goes off after

starting the engine.

僅 The indicator light does not blink but

appears.

僅 The indicator light blinks more rapidly.

4

This indicator light blinks for a

few seconds:

僅 The indicator light does not appear at

all.

僅 When the smart key is not in the vehi

-

cle.

Low beam indicator light

- At this time, you can not start the

engine.

This indicator light appears:

僅 When the headlamps are on.

This indicator light appears for 2

seconds and goes off:

僅 When the vehicle can not detect the

High beam indicator light

This indicator light appears:

smart key which is in the vehicle while

the ENGINE START/STOP Button is

ON.

僅 When the headlamps are on and in

the high beam position.

In this case, have the vehicle

inspected by an authorized Kia dealer.

僅 When the turn signal lever is pulled

into the Flash-to-Pass position.

This indicator light blinks:

僅 When the battery of the smart key is

weak.

High Beam Assist indicator light

- At this time, you can not start the

engine. However, you can start the

engine if you press the ENGINE

START/STOP Button with the smart

key. (For more details, refer to

This indicator light appears:

僅 When the high beam is on with the

light switch in the AUTO light position.

"Immobilizer system" on page 4-11).

僅 If your vehicle detects oncoming or

preceding vehicles, High Beam Assist

僅 When there is a malfunction with the

immobilizer system.

4

91

Features of your vehicle

Warning and indicator lights

will switch the high beam to low beam

automatically.

Downhill Brake Control (DBC)

indicator light

* For more details, refer to "High Beam

Assist (HBA)" on page 4-97.

This indicator light appears:

僅 When you set the ignition switch or

ENGINE START/STOP Button to the

ON position.

Light ON indicator light

This indicator light appears:

- It appears for approximately 3 sec

onds and then goes off.

-

僅 When the taillamps or headlamps are

on.

僅 When you activate the system by

pressing the DBC button.

Front fog indicator light

equipped)

(if

This indicator light blinks:

僅 When the DBC is operating.

This indicator light appears:

This indicator light appears yel

low:

-

僅 When the front fog lights are on.

僅 When there is a malfunction with the

DBC system.

Lane Safety indicator light

(if equipped)

If this occurs, have your vehicle

inspected by an authorized Kia dealer.

Lane Safety indicator will appear when

you turn Lane Keeping Assist on by

pressing Lane Safety button.

* For more details, refer to "Downhill

Brake Control (DBC)" on page 5-37.

If there is a problem with Lane Keeping

Assist, the yellow Lane Safety indicator

will appear.

All Wheel Drive (AWD) LOCK

* For more details, refer to "Lane Keeping

Assist (LKA)" on page 6-25.

indicator light

(if equipped)

This indicator light appears:

Cruise Control indicator light

(if equipped)

僅 Once you set the ignition switch or

ENGINE START/STOP button to the

ON position.

This indicator light appears:

- It appears for approximately 3 sec

-

onds and then goes off.

僅 When the cruise control system is

enabled.

僅 When you select AWD lock mode by

pressing the AWD LOCK button.

* For more details, refer to "Cruise Con

-

trol (CC) (if equipped)" on page 6-58.

- The AWD lock mode is to increase

the drive power when driving on

wet pavement, snow covered roads

and/or off-road.

4

92

Features of your vehicle

Lighting

NOTICE

This vehicle is equipped with a variety of

lights to appear the interior and exterior

of the vehicle.

AWD lock mode

Do not use AWD LOCK mode on dry

paved roads or highway, it can cause

noise, vibration or damage of AWD

related parts.

CAUTION

To prevent the battery from being dis

-

charged, do not leave the headlamp and

interior light on for a prolonged time

while the engine is not running.

SPORT Mode indicator light

Battery saver function

The purpose of this feature is to prevent

the battery from being discharged if the

lights are left in the ON position. The

This indicator light appears :

僅 When you select "SPORT" mode as

drive mode.

4

system automatically shuts off the park

ing lights after the engine is off and the

driver's door is opened.

-

For more details, refer to "Drive mode

integrated control system" on page 5-

50.

However, the position lamps stay ON

even when the driver-side door is

opened if the light switch is operated

after the engine is turned off.

If necessary, to keep the lamps on turn

the position lamps OFF and ON again

using the headlamp switch on the steer

-

ing column after the engine is turned off.

Headlamp delay function

If you place the ignition switch or

ENGINE START/STOP button in the ACC

or OFF position with the headlamps ON,

the headlamps (and/or parking lights)

remain on for about 5 minutes. How

ever, with the engine off if the driver's

door is opened and closed, the head

-

lamps (and/or parking lights) are turned

off after 15 seconds.

The headlamps (and/or parking lights)

can be turned off by pressing the lock

button on the smart key twice or turning

the light switch to the OFF or AUTO

position. However, if you turn the light

switch to the AUTO position when it is

4

93

Features of your vehicle

Lighting

dark outside, the headlamps will not be

turned off.

You can activate or deactivate the Head

-

lamp Delay function from the User Set

-

tings Mode in the LCD display. For more

details, refer to "User settings mode" on

page 4-71. If your vehicle is equipped

with additional navigation, please refer

ONQ5031032

To operate the lights, turn the knob at

the end of the control lever to one of the

following positions:

to the infotainment system manual sep

-

arately supplied.

1

OFF position

NOTICE

2

3

4

Auto light position

Position & Taillamp

Headlamp position

If the driver exits the vehicle through

another door besides the driver door,

the battery saver function does not

operate and the headlamp delay func

tion does not turn OFF automatically.

-

Auto head lamp (OFF position)

This may cause the battery to discharge.

To avoid battery discharge, turn OFF the

headlamps manually from the headlamp

switch before exiting the vehicle.

Daytime Running Light (DRL)

OCV041632N

The Daytime Running Light (DRL) can

make it easier for others to see the front

of your vehicle during the day.

The lights turn on or off depending on

the amount of daylight detected from

the sensor when the parking brake is not

activated or vehicle speed is above 5

km/h (3 mph).

The DRL can be helpful in many differ

-

ent driving conditions, and it is especially

helpful after dawn and before sunset.

Activating the parking brake when the

vehicle speed is less than 5 km/h (3

mph) turns the headlamps off automati

cally by the amount of daylight detected

from the sensor.

The DRL will turn the dedicated lamp

OFF when:

-

僅 The headlamps are ON.

僅 The vehicle is off.

僅 The front fog light is on. (if equipped)

僅 Engaging the parking brake.

Position & Taillamp

Lighting control

The light switch has a headlamp and a

position lamp position.

ONQ5031458N

4

94

Features of your vehicle

Lighting

When the light switch is in the position

lamp position, the front position lamp,

taillamp, and the license plate lamp will

turn ON.

CAUTION

僅 Never place anything over the sensor

(1) located on the instrument panel as

this will ensure better auto-light sys

-

tem control.

Headlamp (Low Beam)

僅 Don't clean the sensor using a window

cleaner, the cleaner may leave a light

film which could interfere with sensor

operation.

僅 If your vehicle has window tint or

other types of metallic coating on the

front windshield, the Auto light system

may not work properly.

ONQ5031459N

When the light switch is in the headlamp

position, headlamp (low beam), tail,

license light will turn ON.

4

Operating high beam

NOTICE

The ignition switch or ENGINE START/

STOP button must be in the ON position

to turn on the headlamps.

ONQ5031461N

To turn on the high beam headlamp:

僅 Push the lever away from you.

Auto light

The lever will return to its original

position.

The high beam indicator will light

when the headlamp high beams are

switched on.

WARNING

High beams

Do not use high beam when there are

other vehicles in front of or approaching

your vehicle. Using high beam could

obstruct the other driver's vision.

ONQ5031460N_2

When the light switch is in the AUTO

light position, the taillamps and head

lamps will turn ON or OFF automatically

depending on the amount of light out

-

To flash the headlamps:

僅 Pull the lever towards you.

-

side the vehicle.

4

95

Features of your vehicle

Lighting

One-touch lane change function

To activate a one-touch lane change

function, move the turn signal lever

slightly and then release it. The lane

change signals will blink 3, 5 or 7 times.

You can activate or deactivate the One

Touch Turn Signal function or choose

the number of blinking (3, 5, or 7) by

selecting "User Settings →Lights → One

Touch Turn Signal".

ONQ5031462N

It will return to the normal (low beam)

position when released. The head

lamp switch does not need to be on to

use this flashing feature.

-

NOTICE

Operating turn signals and lane

change signals

If an indicator flash is abnormally quick

or slow, a bulb may be burned out or

have a poor electrical connection in the

circuit. The bulb may require replace

ment.

-

Operating front fog light

equipped)

(if

ONQ5031033

The ENGINE START/STOP button must

be on for the turn signals to function.

Fog lights are designed to provide

improved visibility when visibility is poor

due to fog, rain or snow, etc.

To turn on the turn signals:

僅 Move the lever up or down (A).

The green arrow indicators on the

instrument panel indicate which turn

signal is operating.

They will self-cancel after a turn is

completed. If the indicator continues

to flash after a turn, manually return

the lever to the OFF position.

ONQ5031034

The fog lights will turn on when the fog

light switch (1) is turned to the on posi

tion after the headlamp is turned on.

-

To signal a lane change:

僅 Move the turn signal lever slightly and

hold it in position (B).

To turn off the fog lights:

僅 Turn the fog light switch (1) to the ON

position.

The lever will return to the OFF posi

-

tion when released.

CAUTION

If an indicator stays on and does not

flash or if it flashes abnormally, one of

When in operation, the fog lights con

-

the turn signal bulbs may be burned out

and will require replacement.

sume large amounts of vehicle electrical

power. Only use the fog lights when visi

-

bility is poor.

4

96

Features of your vehicle

Lighting

High Beam Assist (HBA)

High Beam Assist setting

With the ENGINE START/STOP button in

the ON position, select 'Lights → High

Beam Assist' from the Settings menu to

turn on High Beam Assist and deselect

to turn off the function.

WARNING

ONQ5031035

For your safety, adjust your high beam

settings only after parking the vehicle at

a safe location.

High Beam Assist is a function that auto

matically adjusts the headlamp range

(switches between high beam and low

beam) depending on the brightness of

-

detected vehicles and certain road con

ditions.

-

High Beam Assist operation

Display and control

4

Detecting sensor

僅 After selecting 'High Beam Assist' in

the Settings menu, High Beam Assist

Front view camera

will operate by following the proce

-

dure below.

- Place the headlamp switch in the

AUTO position and push the head

-

lamp lever towards the instrument

cluster. The High Beam Assist (

)

ONQ5051040N

indicator light will appear on the

cluster and the function will be

enabled.

The front view camera is used as a

detecting sensor to detect ambient light

and brightness while driving.

- When the function is enabled, high

beam will turn on when vehicle

speed is above 40 km/h (25 mph).

When vehicle speed is below 25

km/h (15 mph), high beam will not

turn on.

Refer to the picture above for the

detailed location of the detecting sensor.

NOTICE

僅 Always keep the front view camera in

good condition to maintain optimal

performance of High Beam Assist.

- The High Beam (

) indicator light

will appear on the cluster when

high beam is on.

僅 For more details on the precautions of

the front view camera, refer to "For

-

僅 When High Beam Assist is operating,

if the headlamp lever or switch is

used, the function operates as follows:

ward Collision-Avoidance Assist (FCA)

(Front Camera Only) (if equipped)" on

page 6-4 or "Forward Collision-Avoid

ance Assist (FCA) (Sensor Fusion) (if

equipped)" on page 6-13.

-

- If the headlamp lever is pulled

towards you when the high beam is

off, the high beam will turn on with

-

out High Beam Assist canceled.

4

97

Features of your vehicle

Lighting

When you let go of the headlamp

When High Beam Assist is not working

lever, High Beam Assist will turn on

again.

properly, the 'Check High Beam Assist

(HBA) system' warning message will

- If you push the light switch towards

the instrument cluster, high beam is

turned on and High Beam Assist is

released.

appear and warning light (

) will

appear on the cluster. Have the function

inspected by an authorized Kia dealer.

Limitations

- If the headlamp lever is pulled

towards you when the high beam is

on by High Beam Assist, low beam

will be on and the function will turn

off.

High Beam Assist may not work properly

in the following situations:

僅 Light from a vehicle is not detected

because of lamp damage, or because

it is hidden from sight, etc.

- If the headlamp switch is placed

from AUTO to another position

(headlamp/position/off), High

Beam Assist will turn off and the

corresponding lamp will turn on.

僅 Headlamp of a vehicle is covered with

dust, snow or water.

僅 A vehicle's headlamps are off but the

fog lamps are on and etc.

僅 When High Beam Assist is operating,

high beam switches to low beam if

any of the following conditions occur:

僅 There is a lamp that has a similar

shape as a vehicle's lamp.

僅 Headlamps have been damaged or

not repaired properly.

- When the headlamp of an oncom

-

ing vehicle is detected.

僅 Headlamps are not aimed properly.

- When the taillamp of a vehicle in

front is detected.

僅 Driving on a narrow curved road,

rough road, uphill or downhill.

- When the headlamp or taillamp of a

motorcycle or a bicycle is detected.

僅 Vehicle in front is partially visible on a

crossroad or curved road.

- When the surrounding ambient

light is bright enough that high

beams are not required.

僅 There is a traffic light, reflecting sign,

flashing sign or mirror ahead.

僅 There is a temporary reflector or flash

ahead (construction area).

- When streetlights or other lights are

detected.

僅 The road conditions are bad such as

being wet, iced or covered with snow.

Malfunction and limitations

Malfunction

僅 A vehicle suddenly appears from a

curve.

僅 The vehicle is tilted from a flat tire or

is being towed.

僅 Light from a vehicle is not detected

because of exhaust fume, smoke, fog,

snow, etc.

OCV051213L

A: Check High Beam Assist (HBA) sys

-

tem

4

98

Features of your vehicle

Wipers and washers

NOTICE

The wipers and washers remove foreign

substances from the windshield and rear

window, helping to maintain visibility.

僅 Depending on the instrument cluster

specification or theme, images or col

ors may be displayed differently.

-

僅 For more details on the limitations of

the front view camera, refer to "For

-

ward Collision-Avoidance Assist (FCA)

(Front Camera Only) (if equipped)" on

page 6-4 and "Forward Collision-

Avoidance Assist (FCA) (Sensor

ONQ5031466N

Fusion) (if equipped)" on page 6-13.

WARNING

僅 At times, High Beam Assist may not

work properly. The function is for your

4

convenience only. It is the responsibil

-

ONQ5031501N

A: Wiper speed control

僅 MIST – Single wipe

僅 OFF – Off

ity of the driver for safe driving prac

tices and always check the road

conditions for your safety.

-

僅 When High Beam Assist does not

僅 INT – Intermittent wipe

AUTO* – Auto control wipe

僅 LO – Low wiper speed

僅 HI – High wiper speed

operate normally, change the head

lamp position manually between high

beam and low beam.

-

B: Intermittent control wipe time

adjustment/Auto control wipe time

adjustment*

C: Wash with brief wipes (Pull lever

towards you)

D: Rear wiper/washer control

僅 HI - Continuous wipe

僅 LO - Intermittent wipe

僅 OFF - Off

E: Wash with brief wipes (Rear/Push

lever away from you)

*: if equipped

4

99

Features of your vehicle

Wipers and washers

vehicle accidents and wiper damage

Windshield wipers

from overloading the wiper motor. If the

wipers stop, remove snow accumulated

on the top or bottom of windshield

before using them.

Operate as follows when the ignition

switch or ENGINE START/STOP button is

ON.

僅 MIST: For a single wiping cycle, move

the lever to this position and release it.

The wipers will operate continuously if

the lever is held in this position.

Auto control (if equipped)

僅 OFF: Wiper is not in operation

僅 INT: Wiper operates intermittently at

the same wiping intervals. Use this

mode in light rain or mist. To vary the

speed setting, turn the speed control

knob.

ONQ5031041

The rain sensor (A) located on the upper

end of the windshield glass senses the

amount of rainfall and controls the wip

僅 LO: Normal wiper speed

僅 HI: Fast wiper speed

-

ing cycle for the proper interval. The

NOTICE

more it rains, the faster the wiper oper

ates. When the rain stops, the wiper

stops.

-

If there is heavy accumulation of snow

or ice on the windshield, defrost the

windshield for about 10 minutes, or until

the snow and/or ice is removed before

using the windshield wipers to ensure

proper operation. If you do not remove

the snow and/or ice before using the

wiper and washer, it may damage the

wiper and washer system.

To vary the speed setting, turn the

speed control knob (B).

If the wiper switch is set in AUTO mode

when the ignition switch or ENGINE

START/STOP button is ON, the wiper will

operate once to perform a self-check of

the system. Set the wiper to OFF position

when the wiper is not in use.

WARNING

Do not use the washer in freezing tem

-

peratures without first warming the

windshield with the defrosters; the

washer solution could freeze on the

windshield and obscure your vision,

resulting in an accident.

When the ignition switch or ENGINE

START/STOP button is ON and the wind

shield wiper switch is placed in the

AUTO mode, use caution in the following

situations to avoid any injury to the

hands or other parts of the body:

-

僅 Do not touch the upper end of the

windshield glass facing the rain sen

sor.

INFORMATION

-

If you operate the wipers while driving

on snowy roads, the wipers may stop

due to snow buildup on your windshield.

This is normal and not a failure because

it is one of our safety features to prevent

僅 Do not wipe the upper end of the

windshield glass with a damp or wet

cloth.

4

100

Features of your vehicle

Wipers and washers

僅 Do not put pressure on the windshield

glass.

and to run the wipers 1~3 cycles. Use

this function when the windshield is

dirty. The spray and wiper operation

will continue until you release the

lever.

CAUTION

僅 When washing the vehicle, set the

wiper switch in the OFF position to

stop the auto wiper operation.

If the washer does not work, check the

washer fluid level. If the fluid level is not

sufficient, you will need to add appropri

ate non-abrasive windshield washer

fluid to the washer reservoir.

-

The wiper may operate and be dam

aged if the switch is set in the AUTO

mode while washing the vehicle.

-

The reservoir filler neck is located in the

front of the engine compartment on the

passenger side.

僅 Do not remove the sensor cover

located on the upper end of the pas

senger side windshield glass. Damage

to system parts could occur and may

-

CAUTION

not be covered by your vehicle war

ranty.

-

4

To prevent possible damage to the

washer pump, do not operate the

washer when the fluid reservoir is

empty.

僅 When starting the vehicle in winter,

set the wiper switch in the OFF posi

-

tion. Otherwise, wipers may operate

and ice may damage the windshield

wiper blades. Always remove all snow

and ice and defrost the windshield

WARNING

Do not use the washer in freezing tem

peratures without first warming the

windshield with the defrosters; the

washer solution could freeze on the

windshield and obscure your vision.

-

properly prior to operating the wind

shield wipers.

-

僅 When tinting the windshield, be care

-

ful of any fluid getting into the sensor

located in the top center of the front

windshield. It may damage the related

parts.

CAUTION

僅 To prevent possible damage to the

wipers or windshield, do not operate

the wipers when the windshield is dry.

Operating windshield washers

僅 To prevent damage to the wiper

blades, do not use gasoline, kerosene,

paint thinner, or other solvents on or

near them.

僅 To prevent damage to the wiper arms

and other components, do not

attempt to move the wipers manually.

ONQ5031042

1. Move the wiper speed control switch

to the OFF position.

僅 To prevent possible damage to the

wipers and washer system, use anti-

2. Pull the lever gently toward you to

spray washer fluid on the windshield

4

101

Features of your vehicle

Wipers and washers

freezing washer fluids in the winter

season or cold weather.

Heated washer nozzle (if

equipped)

The heated washer nozzle function

defreezes the washer nozzles in freezing

weather.

Operating rear window wiper and

washer switch

The heated washer nozzle will turn on

and off automatically when the ignition

switch or ENGINE START/STOP button is

in ON position or when the engine is

running in following conditions:

The rear window wiper and washer

switch is located at the end of the wiper

and washer switch lever.

僅 Turn the switch to the desired position

to operate the rear wiper and washer.

僅 Turns ON when the outside tempera

-

ture is below 5 °C, and OFF when it is

over 10 °C.

僅 The washer fluid defreezing speed

may be slower when the ignition

switch or ENGINE START/STOP but

ton is in ON position, than compared

to when the engine is running.

-

ONQ5031467N

僅 HI - Normal wiper operation

僅 LO - Intermittent wiper operation

僅 OFF - Wiper is not in operation

僅 When the ignition switch or ENGINE

START/STOP button is in ON position,

after approximately 20 minutes of

operation, the system will turn off

automatically to prevent possible bat

tery discharge.

僅 Push the lever away from you to

spray rear washer fluid and to run the

rear wipers several times.

-

僅 After the engine is running, the

washer fluid will defrost approxi

-

mately after 5~10 minutes.

僅 If the engine has been started within

the operating temperature, the

heated nozzle remains ON even

approximately after 20 minutes.

ONQ5031468N

The spray and wiper operation will con

-

tinue until you release the lever.

NOTICE

When the front wiper is activated and

The heated washer nozzle may not func

tion properly under following conditions:

-

the gear is switched to R (Reverse) posi

tion, the rear wiper will be activated once

to provide better visibility.

-

僅 The washer fluid in the washer reser

-

voir is frozen.

僅 Outside temperature sensor is mal

functioning.

-

4

102

Features of your vehicle

Welcome system

Interior light

Welcome system (if equipped)

When the interior light switch is in the

DOOR position and all doors (and lift

The welcome system is a function that

illuminates the surroundings or the inte

-

gate) are locked and closed, the room

lamp will come on for 30 seconds if any

of the following occurs:

rior when the driver approaches or exits

the vehicle.

僅 With the smart key system

Door handle lamp (if equipped)

- When the door unlock button is

pressed on the smart key.

- When the button of the outside

door handle is pressed.

At this time, if you press the door lock

button, the lamps will turn off immedi

-

ONQ5031058N

ately.

When all the doors (and liftgate) are

closed and locked, the door handle lamp

will come on for about 15 seconds if any

of the below is performed.

4

僅 When the door unlock button is

pressed on the smart key.

僅 When the button of the outside door

handle is pressed.

僅 When the vehicle is approached with

the smart key in possession.

Headlamp (headlamp) escort

function

The headlamps (and/or taillamps)

remain on for approximately 5 minutes

after the ignition key is removed or

turned to the ACC or LOCK position.

However, if the driver's door is opened

and closed, the headlamps are turned

off after 15 seconds.

The headlamps can be turned off by

pressing the lock button on the transmit

ter or smart key twice or turning off the

light switch from the headlamp or Auto

light position.

-

4

103

Features of your vehicle

Interior lights

Type B

Interior lights

This vehicle is equipped with lights

throughout the vehicle to illuminate the

interior.

CAUTION

Do not use the interior lights for

extended periods when the engine is not

running.

ONQ5031037

僅 Press the lens (1) to turn ON the map

lamp.

It may cause battery discharge.

To turn the map lamp OFF press the

lens (1) again.

WARNING

僅

(2): DOOR mode

Do not use the interior lights when driv

-

- The map lamp and room lamp

come on when a door is opened.

ing in the dark. Accidents could happen

because the view may be obscured by

interior lights.

The lamps go out after approxi

-

mately 30 seconds.

- The map lamp and room lamp

come on for approximately 30 sec

Automatic turn off function

-

The interior lights automatically turn off

approximately 20 minutes after the

ENGINE START/STOP button is turned

off, if the lights are in the ON position.

onds when doors are unlocked with

a smart key as long as the doors

are not opened.

- The map lamp and room lamp will

If your vehicle is equipped with the theft

stay on for approximately 20 min

utes if a door is opened with the

-

alarm system, the interior lights auto

-

matically turn off approximately 5 sec

onds after the system is armed.

-

ENGINE START/STOP button in the

ACC or OFF position.

- The map lamp and room lamp will

stay on continuously if the door is

opened with the ENGINE START/

STOP button in the ON position.

Map lamp

Type A

- The map lamp and room lamp will

go out immediately if the ENGINE

START/STOP button is changed to

the ON position or all doors are

locked.

ONQ5H031011

- To turn off the DOOR mode, press

the DOOR button (2) once again

(not pressed).

僅

(3): Press this switch to turn the

front and rear room lamps on and off.

4

104

Features of your vehicle

Interior lights

NOTICE

CAUTION

The DOOR mode and ROOM mode can

not be selected at a time.

The luggage room lamp comes on as

long as the liftgate opens. To prevent

unnecessary charging system drain,

close the liftgate securely after using the

luggage room.

Room lamp (if equipped)

Vanity mirror lamp (if equipped)

ONQ5H031012

Press the switch to turn the room lamp

on and off.

ONQ5031060

4

Personal lamp (if equipped)

Push the switch to turn the light on or

off.

僅

: The lamp will turn on if this but

-

ton is pressed.

僅

: The lamp will turn off if this button

is pressed.

ONQ5031038

CAUTION

Press the switch to turn the room lamp

on and off.

Vanity mirror lamp

Always close the lid of the vanity mirror

in the off position when the vanity mirror

lamp is not in use. If the sun visor is

Luggage room lamp

僅

: The lamp will always turn on

when the liftgate is opened/closed.

closed without the lamp off, it may dis

charge the battery or damage the sun

visor.

-

僅

: The lamp is on when the liftgate

is opened, and off when the liftgate is

closed.

僅

: The lamp will always turn off

when the liftgate is opened/closed.

ONQ5031059

The luggage room lamp comes on when

the liftgate is opened.

4

105

Features of your vehicle

Climate control system

Glove box lamp

Climate control system

The climate control system uses cooling

and heating to help maintain a pleasant

environment inside the vehicle.

System operation

ONQ5031039

Ventilation

The glove box lamp comes on when the

glove box is opened.

1. Set the mode to the

position.

2. Set the air intake control to the out

side (fresh) air position.

-

NOTICE

To prevent unnecessary charging sys

tem drain, close the glove box securely

after using the glove box.

-

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

Heating

1. Set the mode to the

position.

2. Set the air intake control to the out

-

side (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

5. If dehumidified heating is desired,

turn the air conditioning system on.

僅 If the windshield fogs up, set the

mode to the

or

position.

Operation tips

僅 To keep dust or unpleasant fumes

from entering the vehicle through the

ventilation system, temporarily set the

air intake control to the recirculated

air position. Be sure to return the con

trol to the fresh air position when the

irritation has passed to keep fresh air

in the vehicle. This will help keep the

driver alert and comfortable.

-

4

106

Features of your vehicle

Climate control system

僅 Air for the heating/cooling system is

drawn in through the grilles just at the

base of the windshield. Care should

be taken that these are not blocked

CAUTION

Excessive air conditioning use

When using the air conditioning system,

monitor the temperature gauge closely

while driving up hills or in heavy traffic

when outside temperatures are high. Air

conditioning system operation may

cause vehicle overheating. Continue to

use the blower fan but turn the air con

ditioning system off if the temperature

gauge indicates vehicle overheating.

by leaves, snow, ice or other obstruc

-

tions.

僅 To prevent fog from forming on the

inside of the windshield:

- Set the air intake control to the

fresh air position and the fan speed

to the desired position.

-

- Turn on the air conditioning sys

-

tem, and adjust the temperature

control to desired temperature.

CAUTION

The air conditioning system should only

be used with the windows and sunroof

closed to prevent condensation inside

the vehicle that may cause damage to

electrical components.

4

Air conditioning (A/C)

All Kia air conditioning systems are filled

with R-1234yf refrigerant.

1. Start the vehicle. Press the A/C but

-

ton.

Air conditioning system opera

tion tips

-

2. Set the mode to the

position.

3. Set the air intake control to the out

side-air or recirculated air position.

-

僅 If the vehicle has been parked in

direct sunlight during hot weather,

open the windows for a short time to

let the hot air inside the vehicle

escape.

4. Adjust the fan speed control and tem

perature control to maintain maxi

mum comfort.

-

僅 To help reduce moisture inside of the

windows on rainy or humid days,

decrease the humidity inside the vehi

cle by operating the air conditioning

system.

CAUTION

僅 The refrigerant system should only be

-

serviced by trained and certified tech

nicians to insure proper and safe

operation.

-

僅 During air conditioning system opera

tion, you may occasionally notice a

slight change in vehicle speed as the

air conditioning compressor cycles.

-

僅 The refrigerant system should be ser

viced in a well-ventilated place.

-

僅 The air conditioning evaporator (cool

ing coil) shall never be repaired or

replaced with one removed from a

used or salvaged vehicle and new

replacement MAC evaporators shall

be certified (and labeled) as meeting

SAE Standard J2842.

-

This is a normal characteristic of sys

-

tem operation.

僅 To ensure maximum system perfor

-

mance, the air conditioning system

should be run for a few minutes each

month.

4

107

Features of your vehicle

Climate control system

僅 When using the air conditioning sys

tem, you may notice clear water drip

ping (or even puddling) on the ground

-

selected. If this happens, have the cli

mate control air filter replaced by an

authorized Kia dealer.

-

under the passenger side of the vehi

cle. This is a normal characteristic of

system operation.

-

NOTICE

僅 Replace the filter according to the

Maintenance Schedule. If the vehicle

is being driven in severe conditions

such as dusty or rough roads, more

僅 Operating the air conditioning system

in the recirculated air position pro

vides maximum cooling; however,

continual operation in this mode may

cause the air inside the vehicle to

become stale.

-

frequent air conditioner filter inspec

tions and changes are required.

-

僅 When the air flow rate suddenly

decreases, have the system checked

by an authorized Kia dealer.

僅 During cooling operation, you may

occasionally notice a misty air flow

because of rapid cooling and humid

air intake. This is a normal character

-

Checking the amount of air con

-

istic of system operation.

ditioner refrigerant and compres

sor lubricant

-

Climate control air filter

When the amount of refrigerant is low,

the performance of the air conditioning

The climate control air filter installed

behind the glove box filters the dust or

other pollutants that come into the vehi

cle from the outside through the heating

and air conditioning system.

is reduced. Overfilling also has a nega

-

tive impact on the air conditioning sys

-

tem.

Therefore, if abnormal operation is

found, have the system inspected by an

authorized Kia dealer.

WARNING

The oil and refrigerant in your vehicle's

air conditioning system is under very

ONQ5EP041426L

A: Outside air

high pressure. If proper service proce

-

dures are not followed, an explosion

B: Recirculated air

C: Climate control air filter

D: Blower

may result. To reduce the risk of serious

injury or death, the air conditioning sys

-

tem in your vehicle should only be ser

viced by trained and certified

technicians.

-

E: Evaporator core

F: Heater core

If dust or other pollutants accumulate in

the filter over a period of time, the air

flow from the air vents may decrease.

This leads to moisture accumulating on

the inside of the windshield even when

the outside (fresh) air position is

CAUTION

It is important that the correct type and

amount of oil and refrigerant is used,

otherwise damage to the vehicle may

occur. To prevent damage, the air condi

-

4

108

Features of your vehicle

Climate control system

tioning system in your vehicle should

only be serviced by trained and certified

technicians.

WARNING

Vehicles equipped with R-1234yf*

Since the refrigerant is mildly flammable

and operated at high pressure, the air

conditioning system should only be ser

-

viced by trained and certified techni

cians.

-

It is important that the correct type and

amount of oil and refrigerant are used.

All refrigerants should be reclaimed with

proper equipment. Venting refrigerants

directly to the atmosphere is harmful to

individuals and environment. Failure to

heed these warnings can lead to serious

injuries.

4

109

Features of your vehicle

Manual climate control system

The manual climate control system uses cooling and heating to help maintain a

pleasant environment inside the vehicle.

ONQ5031365N

1

Fan speed control knob

2

3

4

5

6

7

Front windshield defroster button

Rear window defroster button

Air conditioning (A/C) button (if equipped)

Air intake control button

Mode selection button

Temperature control knob

CAUTION

Operating the blower without the engine

running could drain the battery. Operate

the blower only when the engine is run

ning.

-

4

110

Features of your vehicle

Manual climate control system

Heating and air conditioning

4

ONQ5031309N

1. Start the engine.

2. Set the mode to the desired position.

For improving the effectiveness of heating and cooling;

僅 Heating:

僅 Cooling:

3. Set the temperature control to the desired position.

4. Set the air intake control to the outside (fresh) air position.

5. Set the fan speed control to the desired speed.

If air conditioning is desired, turn the air conditioning system on.

4

111

Features of your vehicle

Manual climate control system

Mode selection

Instrument panel vents (if

equipped)

The mode selection buttons control the

direction of the air flow through the ven

tilation system.

-

ONQ5031311

Air can be directed to the floor, dash

-

board outlets, or windshield. Five sym

bols are used to represent Face, Bi-

-

ONQ5031300_2

Level, Floor, Floor-Defrost and Defrost

air position.

You can adjust the direction of air deliv

ered from these vents using the vent

control lever as shown.

-

Face-Level (B, D, F)

To close the vent, push the air vent lever

Air flow is directed toward the upper

body and face. Additionally, each outlet

in the opposite direction of the passen

-

ger.

can be controlled to direct the air dis

charged from the outlet.

-

To open the vent, push the air vent lever

in the same direction of the passenger.

Bi-Level (B, C, D, E, F)

Temperature control

Air flow is directed towards the face and

the floor.

The temperature control knob allows

you to control the temperature of the air

flowing from the ventilation system.

Floor-Level (A, C, D, E, F)

Most of the air flow is directed to the

floor, with a small amount of the air

being directed to the windshield, side

window defrosters and side air vents.

Floor/Defrost-Level (A, C, D, E, F)

ONQ5031315

Most of the air flow is directed to the

floor and the windshield with a small

amount directed to the side window

defrosters and side air vents.

To change the air temperature in the

passenger compartment, turn the knob

to the right for warm and hot air or to

the left for cooler air.

Defrost-Level (A, D)

NOTICE

Most of the air flow is directed to the

windshield with a small amount of air

directed to the side window defrosters

and side air vents.

When starting the vehicle in cold

weather a more efficient way to heat the

4

112

Features of your vehicle

Manual climate control system

passenger compartment is to do the fol

-

With the outside (fresh) air position

lowing.

selected, air enters the vehicle from out

side and is heated or cooled according

to the function selected.

-

僅 Turn off or lower the blower, right

after starting the engine.

僅 Engine temperature is still low and the

air flow from the heater is still cold.

NOTICE

Prolonged operation of the heater in the

僅 After a few minutes of engine warm

up, turn on or set the fan to a higher

recirculated air position (without air con

ditioning selected) may cause fogging of

the windshield and side windows, and

-

level and adjust the temperature set

-

ting to hot.

the air within the passenger compart

-

ment may become stale.

Controlling air intake

In addition, prolonged use of the air con

-

The air intake control is used to select

ditioning with the recirculated air posi

-

the outside (fresh) air position or recircu

lated air position.

-

tion selected will result in excessively dry

air in the passenger compartment.

4

Without outside air position button

WARNING

僅 Continuously using the climate control

system in the recirculated air position

may allow humidity to increase inside

the vehicle, which may fog the glass

and obscure visibility.

ONQ5031312N

僅 Do not sleep in a vehicle with the air

conditioning or heating system on. It

may cause serious harm or death due

to a drop in the oxygen level and/or

body temperature.

To change the air intake control position.

僅 Push the desired control button

Recirculated air position

The indicator light on the but

ton appears when the recircu

lated air position is selected.

-

僅 Continuously using the climate control

system in the recirculated air position

can cause drowsiness or sleepiness,

and loss of vehicle control. Set the air

intake control to the outside (fresh) air

position as much as possible while

driving.

With the recirculated air position

selected, air from the passenger com

partment will be drawn through the

-

heating system and heated or cooled

according to the function selected.

Controlling fan speed

Outside (fresh) air position

The fan speed control knob allows you

to control the fan speed of the air flow

ing from the ventilation system.

-

The indicator light on the but

-

ton will turn off when the out

side (fresh) air position is

selected.

-

The ENGINE START/STOP button must

be in the ON position for fan operation.

4

113

Features of your vehicle

Manual climate control system

To change the fan speed:

僅 Turn it right for higher speed, or turn

it left for lower speed.

ONQ5031512N

Turning off the blowers

To turn off the blowers:

僅 Turn the fan speed control knob to

the "0" position.

ONQ5031513N

Air conditioning (A/C)

ONQ5031313L

僅 Press the A/C button to turn the air

conditioning system on (indicator light

will appear).

僅 Press the button again to turn the air

conditioning system off.

4

114

Features of your vehicle

Automatic climate control system

The automatic climate control system uses cooling and heating to help maintain a

pleasant environment inside the vehicle.

Type A (button)

4

ONQ5031361N_2

Type B (control panel)

ONQ5031381N_2

1

Driver's temperature control knob

Passenger's temperature control knob

AUTO (automatic control) button

OFF button

10 Air intake control button

2

3

4

5

6

7

8

9

11 Air conditioning (A/C) button

12 Front glass heater (if equipped)

13 Infotainment/climate control mode

switching button

Fan speed control button

Mode selection button

Front windshield defroster button

Rear window defroster button

SYNC button

4

115

Features of your vehicle

Automatic climate control system

The selected control panel icon will

appear and the control panel will be

changed.

NOTICE

Operating the blower without the engine

running could drain the battery. Operate

the blower only when the engine is run

ning.

僅 The knob display will appear accord

ing to the selected control panel

mode.

-

僅 When the vehicle is in the ACC posi

tion, only the infotainment system will

be activated.

-

Using the infotainment/climate

switchable controller control

panel (For Type B)

Setting the default mode

OCV041315

Press the button on the switchable con

troller to switch between infotainment

system or climate control panel.

-

OCV041559L

Press and hold the button to select the

default mode for the control panel.

Press and hold the button to select the

default mode for the control panel.

僅 After the setting, the control panel will

return to the default mode after a cer

tain period of time even if the control

panel is switched to the different

mode.

-

Switching between panels

Infotainment control panel

僅 If the mode is set to 'OFF', the control

panel will display the mode used

recently.

Heating and air conditioning

automatically

1. Press the AUTO button.

OCV041316

The modes, fan speeds, air intake and

air-conditioning will be controlled

Climate control panel

automatically by setting the tempera

-

ture.

ONQ5031382N

Press the button on the switchable con

-

troller to select the desired control panel.

4

116

Features of your vehicle

Automatic climate control system

Type A (button)

僅 MEDIUM: Provide air conditioning

and heating with medium strength

wind

僅 LOW: It is suitable for drivers who

prefer to soft wind.When you select

the temperature to HI or LO in

AUTO mode, the wind strength is

automatically set to 'HIGH'.

ONQ5031318

Type B (control panel)

2. Set the temperature control switch to

the desired temperature.

Type A (button)

ONQ5031319

4

You can control the air flow in three

stages by pushing the AUTO button

during automatic operation.

ONQ5EP031322L

Type B (control panel)

For Type A (button)

Level

Indicator

LCD Display

Air flow

2~8

High

Medium

Low

1~6

1~4

ONQ5031305

The climate control system is auto

matically controlled according to the

desired temperature.

-

僅 To turn the automatic operation off,

select any of the following buttons or

switches:

For Type B (control panel)

Level

Indicator

LCD Display

Air flow

2~8

- Mode selection button

High

- Air conditioning (A/C) button

- Front windshield defroster button

(Press the button one more time to

deselect the front windshield

Medium

Low

1~6

1~4

defroster function. The 'AUTO' sign

will appear on the information dis

-

play once again.)

- Fan speed control switch

僅 HIGH: Provide rapid air condition

-

ing and heating with strong wind

4

117

Features of your vehicle

Automatic climate control system

The selected function will be con

-

trolled manually while other func

-

tions operate automatically.

僅 For your convenience and to improve

the effectiveness of the climate con

-

trol, use the AUTO button and set the

temperature to 22 °C (72 °F).

NOTICE

Do not place anything over the sensor

located on the instrument panel to

ensure better control of the heating and

cooling system.

ONQ5A041022

4

118

Features of your vehicle

Automatic climate control system

Heating and air conditioning manually

The heating and cooling system can be controlled manually by pressing buttons

other than the AUTO button.

4

ONQ5031309N

In this case, the system works sequentially according to the order of buttons selected.

1. Start the vehicle.

2. Set the mode to the desired position.

For improving the effectiveness of heating and cooling;

僅 Heating:

僅 Cooling:

3. Set the temperature control to the desired position.

4. Set the air intake control to the outside (fresh) air position.

5. Set the fan speed control to the desired speed.

If air conditioning is desired, turn the air conditioning system on.

Press the AUTO button in order to convert to fully automatic control of the system.

4

119

Features of your vehicle

Automatic climate control system

directed to the side window defrosters

and side air vents.

Mode selection

The mode selection button controls the

direction of the air flow through the ven

tilation system.

-

Instrument panel vents

Type A/B

ONQ5031332_2

The air flow outlet ports are switched in

the following sequence:

ONQ5031300_2

You can adjust the direction of air deliv

ery from these vents using the vent con

-

Face-Level (B, D, F)

trol lever as shown.

Air flow is directed toward the upper

body and face. Additionally, each outlet

To close the vent, push the air vent lever

in the opposite direction of the passen

ger.

-

can be controlled to direct the air dis

charged from the outlet.

-

To open the vent, push the air vent lever

in the same direction of the passenger.

Bi-Level (B, C, D, E, F)

Air flow is directed towards the face and

the floor.

Temperature control

Type A (button)

Floor-Level (A, C, D, E, F)

Most of the air flow is directed to the

floor, with a small amount of the air

being directed to the windshield, side

window defrosters and side air vents.

Floor/Defrost-Level (A, C, D, E, F)

ONQ5031320

Most of the air flow is directed to the

floor and the windshield with a small

amount directed to the side window

defrosters and side air vents.

Type B (control panel)

Defrost-Level (A, D)

Most of the air flow is directed to the

windshield with a small amount of air

ONQ5031302

4

120

Features of your vehicle

Automatic climate control system

The temperature will increase to the

maximum (HI) by turning the knob all

the way to the right.

1. Press the "SYNC" button to adjust the

driver and passenger side tempera

-

ture equally.

The temperature will decrease to the

minimum (Lo) by turning the knob all the

way to the left.

The passenger side temperature will

be set to the same temperature as the

driver side temperature.

When turning the knob, the temperature

will increase or decrease by 0.5 °C/1 °F.

2. Turn the driver side temperature con

trol knob. The driver and passenger

side temperature will be adjusted

equally.

-

When set to the lowest temperature set

ting, the air conditioning will operate

continuously.

-

3. If you rotate the passenger's tempera

ture control knob, the SYNC button is

turned off and the passenger side

-

NOTICE

When starting the vehicle in cold

temperature can be operated individ

-

weather using manual temperature con

trol, operate the system in the following

method to improve heating.

-

ually.

4

Adjusting the driver and passen

-

ger side temperature individually

僅 Turn off or lower the blower, right

after starting the engine.

Press the "SYNC" button again to adjust

the driver and passenger side tempera

ture individually. The button indicator

will turn off.

-

僅 Allow the engine to warm up during

this time since the air flow from the

heater is still cold.

僅 After a few minutes of engine warm

up, turn on or set the fan to a higher

Changing temperature scale

僅 To change the temperature display

from Fahrenheit to Celsius and vice

versa, press the OFF button, while

level and adjust the temperature set

-

ting to hot.

pressing the AUTO button for 3 sec

-

onds or more.

Adjusting the driver and passen

ger side temperature equally

-

The display will change from Centigrade

to Fahrenheit, or from Fahrenheit to

Centigrade. If the battery has been dis

-

charged or disconnected, the tempera

ture mode display will reset to

Fahrenheit.

-

OGL3041321

4

121

Features of your vehicle

Automatic climate control system

the windshield and side windows and

Controlling air intake

make the air in the passenger compart

ment stale.

-

This is used to select the outside (fresh)

air position or recirculated air position.

In addition, prolonged use of the air con

-

With outside air position button

ditioning with the recirculated air posi

-

tion selected will result in excessively dry

air in the passenger compartment.

Controlling fan speed

The fan speed can be set to the desired

speed by operating the fan speed con

trol button.

-

ONQ5031380L

Without outside air position button

To change the fan speed:

僅 Press button right for higher speed, or

press button left for lower speed.

Type A (button)

ONQ5031312L

To change the air intake control position:

僅 Push the desired control button.

ONQ5EP031322L

Outside (fresh) air position

Type B (control panel)

Type A

Type B

With the outside (fresh) air position

selected, air enters the vehicle from out

side and is heated or cooled according

to the function selected.

-

ONQ5031305

To turn the fan speed control off:

僅 Press the front blower OFF button.

Recirculated air position

With the recirculated air posi

tion selected, air from the

passenger compartment will

-

be drawn through the heating

system and heated or cooled according

to the function selected.

Prolonged operation of the heater in the

recirculated air position (without air con

-

ditioning selected) may cause fogging of

4

122

Features of your vehicle

Automatic climate control system

Air conditioning (A/C)

Turning off the front air climate

control

Type A (button)

ONQ5031313L

僅 Press the A/C button to turn the air

conditioning system on (indicator light

will appear).

ONQ5031323

Type B (control panel)

僅 Press the button again to turn the air

conditioning system off.

WARNING

4

Reduced Visibility

Continuous use of the climate control

system in the recirculated air position

may allow humidity to increase inside

the vehicle, which may fog the glass and

obscure visibility.

ONQ5031324

僅 Press the OFF button to turn off the

front and rear air climate control sys

-

tem.

However, you can still operate the

mode and air intake buttons as long

as the ENGINE START/STOP button is

in the ON position.

WARNING

Recirculated Air

Continued use of the climate control sys

tem in the recirculated air position can

cause drowsiness or sleepiness, and loss

-

of vehicle control. Set the air intake con

trol to the outside (fresh) air position as

much as possible while driving.

-

WARNING

Sleeping with A/C on

Do not sleep in a vehicle with the air con

ditioning or heating on as this may

cause serious harm or death due to a

drop in the oxygen level and/or body

temperature.

-

4

123

Features of your vehicle

Windshield defrosting and defogging

Defogging inside windshield

Windshield defrosting and

defogging

Manual type

When the windshield is covered with

frost or moisture, the front view is

blurred, you should remove the frost

and moisture.

WARNING

Windshield heating

Do not use the

or

position

during cooling operation in extremely

humid weather. The difference between

the temperature of the outside air and

the windshield could cause the outer

surface of the windshield to fog up,

causing loss of visibility. In this case, set

ONQ5031327N_4

Automatic type A (button)

the mode selection to the

position

and fan speed control to the lower

speed.

僅 For maximum defrosting, set the tem

-

perature control to the extreme right/

hot position and the fan speed control

to the highest speed.

僅 If warm air to the floor is desired while

defrosting or defogging, set the mode

to the floor-defrost position.

ONQ5031328N_4

Automatic type B (control panel)

僅 Before driving, clear all snow and ice

from the windshield, rear window,

outside rear view mirrors, and all side

windows.

僅 Clear all snow and ice from the hood

and air inlet in the cowl grill to

improve heater and defroster effi

-

ciency and to reduce the probability

of fogging up the inside of the wind

-

shield.

ONQ5031308L_4

1. Set the fan speed to the desired posi

tion.

-

4

124

Features of your vehicle

Windshield defrosting and defogging

2. Select desired temperature.

3. Press the defroster button (

Automatic type B (control panel)

).

4. The outside (fresh) air position will be

selected automatically and the air

conditioning will turn on according to

the detected ambient temperature.

If the air conditioning and outside (fresh)

air position are not selected automati

cally, adjust the corresponding button

manually. If the position is

-

selected, lower fan speed is adjusted to

a higher fan speed.

ONQ5031520N_4

1. Set the fan speed to the highest posi

tion.

-

Defrosting outside windshield

4

Manual type

2. Set the temperature to the extreme

hot (HI) position.

3. Press the defroster button (

).

4. The outside (fresh) air position will be

selected automatically and the air

conditioning will turn on according to

the detected ambient temperature.

Auto defogging system (if

equipped)

Auto defogging helps reduce the possi

-

bility of fogging up the inside of the

ONQ5031518N_4

windshield by automatically sensing the

moisture on inside the windshield.

Automatic type A (button)

ONQ5031043

The auto defogging system oper

-

ates when the heater or air condi

tioning is on.

-

When the Auto Defogging System oper

-

ONQ5031517N_4

ates, the indicator will appear.

4

125

Features of your vehicle

Windshield defrosting and defogging

If a high amount of humidity is detected

NOTICE

in the vehicle, the Auto Defogging Sys

-

Do not remove the sensor cover located

on the upper end of the driver side wind

shield glass.

tem will be enabled.

-

The following steps will be performed

automatically:

Damage to system parts could occur

and may not be covered by your vehicle

warranty.

1. The A/C button will turn ON.

2. The air intake control will change to

Fresh mode under low outside tem

perature.

-

Defroster

3. The mode will be changed to defrost

to direct airflow to the windshield.

The vehicle is equipped with a defroster

for removing frost or fog from the rear

window.

4. The fan speed will be increased.

To cancel or reset the Auto Defogging

System

CAUTION

Conductors

Press the front windshield defroster but

-

ton for 3 seconds when the ignition

switch or ENGINE START/STOP button is

in the ON position.

To prevent damage to the conductors

bonded to the inside surface of the rear

window, never use sharp instruments or

window cleaners containing abrasives to

clean the window.

When the Auto Defogging System is

canceled, defrost button indicator will

blink 3 times.

If you want to defrost and defog the

front windshield, refer to "Windshield

defrosting and defogging" on page 4-

124.

When the Auto Defogging System is

reset, defrost button indicator will blink 6

times without a signal.

NOTICE

Operating rear window defroster

僅 When the air conditioning is turned on

by Auto defogging system, if you try

to turn off the air conditioning, the

indicator will blink 3 times and the air

conditioning will not be turned off.

The defroster heats the window to

remove frost, fog and thin ice from the

rear window, while the engine is on.

If there is heavy accumulation of snow

on the rear window, brush it off before

operating the rear defroster.

僅 To maintain the effectiveness and

efficiency of the Auto Defogging Sys

-

tem, do not select Recirculation mode

while the system is operating.

僅 When the Auto Defogging System is

operating, the fan speed adjustment

knob, the temperature adjustment

knob, and the air intake control button

are all disabled.

ONQ5031307

To activate the rear window defroster:

4

126

Features of your vehicle

Windshield defrosting and defogging

僅 Press the rear window defroster but

ton located in the heater control

panel.

-

Canceling/returning automatic

defogging logic

The indicator on the rear window

defroster button appears when the

defroster is ON.

The rear window defroster automati

-

cally turns off after approximately 20

minutes or when the ENGINE START/

STOP button is turned off.

To turn off the defroster:

僅 Press the rear window defroster but

-

ton again.

ONQ5041305N_3

Outside mirror defroster (if

equipped)

1. Turn the ENGINE START/STOP button

to the ON position.

4

If your vehicle is equipped with the out

-

2. Press the defroster button (

).

side mirror defrosters, they will operate

at the same time you turn on the rear

window defroster.

3. While pressing the air conditioning (A/

C) button, press the air intake control

button at least 5 times within 3 sec

onds.

-

Defogging logic (if equipped)

To reduce the possibility of fogging up

the inside of the windshield, the air

intake or air conditioning is controlled

The recirculation indicator blinks 3

times in 0.5 second of intervals. It indi

cates that the defogging logic is can

celed or returned to the programmed

status.

-

automatically according to certain con

-

ditions such as or position.

To cancel automatic defogging logic or

return to the automatic defogging logic,

do the following.

If the battery has been discharged or

disconnected, it resets to the defog logic

status.

Front glass heater (if equipped)

The front glass heater heats the window

to remove frost, fog and thin ice from

the interior and exterior of the front win

-

dow, while the engine is running.

ONQ5031373L

4

127

Features of your vehicle

Scheduled Ventilation Control

If there is heavy accumulation of snow

on the front window, brush it off before

operating the front glass heater.

Scheduled Ventilation Control

The Scheduled Ventilation Control

releases hot air in the vehicle to lower

cabin temperature before getting in the

vehicle.

Depending on the outside ambient tem

-

perature, the blower is operated for 5 to

15 minutes while the vehicle is parked.

ONQ5031350L

Turning Schedule Ventilation

Control On or Off

To activate the front glass heater:

僅 Press the front glass heater button.

The indicator on the front glass heater

button illuminates when the front

glass heater is ON.

Turning Schedule Ventilation Control On

or Off The Schedule Ventilation Control

can be turned on and off by selecting

‘Setup → Vehicle Settings → Automatic

Ventilation → Scheduled Ventilation’

from the infotainment system screen.

Also, the starting time can be set within

24 hours. Schedule Ventilation Control

operates only once when the feature is

set.

The front glass heater automatically

turns off after approximately 15 minutes

or when the ignition switch or ENGINE

START/STOP button is turned off. How

-

ever, if you press the button again after

the heater is turned off automatically

after 15 minutes, the heater will stay on

only for approximately 5 minutes. To

turn off the front glass heater while it is

operating, press the front glass heater

button again.

4

128

Features of your vehicle

Storage compartment

To open the glove box:

Storage compartment

僅 Pull the lever and the glove box will

automatically open.

These compartments can be used to

store small items required by the driver

or passengers.

Close the glove box after use.

僅 To avoid possible theft, do not leave

WARNING

Glove box

valuables in the storage compart

-

ment.

To reduce the risk of injury in an acci

-

僅 Always keep the storage compart

-

dent or sudden stop, always keep the

glove box door closed while driving.

ment covers closed while driving. Do

not attempt to place so many items in

the storage compartment that the

storage compartment cover cannot

close securely.

An open glove box door can cause seri

-

ous injury to the passenger in an acci

-

dent, even if the passenger is wearing a

seat belt.

WARNING

4

Flammable materials

CAUTION

Do not store glasses, gas lighter, porta

-

Do not keep food in the glove box for a

long time.

ble battery, canned beverage, spray can,

propane cylinder, cosmetic tube or other

flammable/explosive materials in the

vehicle. These items may catch fire and/

or explode if the vehicle is exposed to

hot temperatures for extended periods.

NOTICE

If the temperature control switch is in

the warm or hot position, warm or hot air

will flow into the glove box.

Center console storage

ONQ5031463N

To open the center console storage:

僅 Pull up the lever.

Glove box

ONQ5031044N

4

129

Features of your vehicle

Interior features

Seat warmer (if equipped)

Interior features

The seat warmer is provided to warm

the front seats during cold weather.

There are various features inside the

vehicle for the convenience of the occu

pants.

-

Front seat

Cup holder

Front

ONQ5031045N_2

Cups or small beverage cans may be

placed in the cup holders.

ONQ5031046N_2

WARNING

With the ignition switch or ENGINE

START/STOP button in the ON position:

Hot liquids

僅 Push either of the buttons to warm

the front and rear seats.

Do not place uncovered cups with hot

liquid in the cup holder while the vehicle

is in motion. If the hot liquid spills, you

may burn yourself. Such a burn to the

driver could lead to loss of control of the

vehicle.

During mild weather or under conditions

where the operation of the seat warmer

is not needed, keep the buttons in the

"OFF" position.

The seat warmer defaults to the OFF

position whenever the ignition switch or

ENGINE START/STOP button is turned

on.

WARNING

Keep cans or bottles out of direct sun

light and do not put them in a vehicle

that is heated up. It may explode.

Temperature control (Manual)

僅 Each time you press the buttons, the

temperature setting of the seat will

change as follows:

CAUTION

僅 Keep your drinks sealed while driving

to prevent spilling your drink. If liquid

spills, it may get into the vehicle's

- Front seat

electrical/electronic system and dam

-

age electrical/electronic parts.

僅 When cleaning spilled liquids, do not

use heat to dry the cup holders. This

may damage the cup holder.

- Rear seat

4

130

Features of your vehicle

Interior features

Damage to the seat warming compo

-

nents could occur.

僅 Do not change the seat cover. It may

damage the seat warmer or air venti

-

lation system.

Temperature control (Automatic)

The seat warmer starts to automatically

control the seat temperature in order to

prevent low-temperature burns after

being manually turned ON.

WARNING

Seat warmer burns

Passengers should use extreme caution

when using seat warmers due to the

possibility of excess heating or burns.

The seat warmer may cause burns even

at low temperatures, especially if used

for long periods of time. In particular, the

driver must exercise extreme care for

the following types of passengers:

You may manually press the button to

increase the seat temperature. However,

it soon returns to the automatic mode

again.

4

1. Infants, children, elderly or handi

-

capped persons, or hospital outpa

tients

-

僅 When pressing the buttons for more

than 1.5 seconds with the seat warmer

operating, the seat warmer will turn

OFF.

2. Persons with sensitive skin, those

unable to detect heat or pain in parts

of the body that are next to the heat

ers, or those that burn easily

-

NOTICE

With the seat warmer buttons in the ON

position, the heating system in the seat

turns off or on automatically depending

on the seat temperature.

3. Fatigued individuals

4. Intoxicated individuals

5. Individuals taking medication that can

cause drowsiness or sleepiness

(sleeping pills, cold tablets, etc.)

CAUTION

僅 When cleaning the seats, do not use

an organic solvent such as paint thin

Air ventilation seat (if equipped)

-

ner, benzene, alcohol and gasoline.

Doing so may damage the surface of

the heater or seats.

僅 To prevent overheating the seat

warmer, do not place anything on the

seats that insulates against heat, such

as blankets, cushions or seat covers

while the seat warmer is in operation.

ONQ5031464N

The temperature setting of the seat

changes according to the buttons posi

-

僅 Do not place heavy or sharp objects

on seats equipped with seat warmers.

tion.

僅 To ventilate your seat cushion, push

the buttons.

4

131

Features of your vehicle

Interior features

Each time you push the buttons, the

airflow will change as follows:

Sun visor

Use the sun visor to shield direct light

through the front or side windows.

The seat warmer (with air ventilation)

defaults to the OFF position whenever

the ENGINE START/STOP button is

turned on.

ONQ5031016N

The actual sun visor lamp in the vehicle

may differ from the illustration.

NOTICE

This function is designed to automati

cally change the temperature setting of

the seat (High -> Low) to maintain maxi

mum comfort inside in case the engine

is stopped by ISG (Idle Stop and Go) sys

tem (if equipped).

-

僅 To use the sun visor, pull it downward.

僅 To use the sun visor for the side win

-

dow, pull it downward, unsnap it from

the bracket (1) and swing it to the side

(2).

-

僅 To use the vanity mirror, pull down

the visor and slide the mirror cover

CAUTION

(4). Adjust the sun visor extension for

ward or backward (3). The ticket

holder (5) is provided for holding a

tollgate ticket.

-

Seat damage

僅 When cleaning the seats, do not use

an organic solvent such as paint thin

-

ner, benzene, alcohol and gasoline.

Doing so may damage the air ventila

tion seat.

WARNING

-

For your safety, do not block your view

when using the sun visor.

僅 Do not place heavy or sharp objects

on the seat. Those things may dam

-

NOTICE

age the air ventilation seat.

僅 Be careful not to spill liquid such as

water or beverages on the seat. If you

spill some liquid, wipe the seat with a

Do not put several tickets in the ticket

holder at one time. This could cause

damage to the ticket holder.

dry towel. Before using the air ventila

-

tion seat, dry the seat completely.

4

132

Features of your vehicle

Interior features

Charging speed is determined according

USB charger (if equipped)

to the charging specification of the con

nected digital device.

-

The USB car charger allows drivers to

charge their digital devices such as

smartphones, and PC tablets.

Rated output:

僅 Digital device with fast charging :

- 9.0V / Max 3.0A

Front

僅 Digital devices with normal charging:

- 5.0V / Max 3.0A

CAUTION

僅 Use the USB car charger with the igni

tion on. Otherwise, Vehicle battery

can be discharged.

-

僅 Use the official USB cable of the man

-

ufacturer of the digital device to be

charged.

4

ONQ5H031038_3

僅 Make sure that any foreign object,

drinks, and water do not come into

contact with the USB car charger.

Water or foreign object can damage

the USB charger.

Plug the cable into the USB port, and

charging will begin.

The USB car charger is available with

either the ACC on or the ignition on. We

recommend you connect the USB port

and digital devices with the engine run

ning. See the display screen of the

device to check its charging process

completion. Your smartphone or table

PC could get heated up while charging.

This is no reason to worry, as it doesn't

impact life or functions of the device. For

safety, charging can be stopped if the

僅 Do not use devices that exceed cur

rent consumption of 2.1 A.

-

僅 Do not connect an electrical device

that generates excessive electromag

netic noise to the USB car port. If you

do so, noise can be caused or vehicle

electronic devices can be interrupted

while audio or AV is on.

-

僅 If the charger is connected incorrectly,

it can cause serious damage to the

device. Please note that damages due

to incorrect usage are not covered by

warranty service.

battery gets too high where the tem

perature can negatively affect the

device. Charging some digital devices is

not available or requires special dedi

-

cated adapters if their charging methods

don't fit the way the USB car charger

works.

Power Delivery 3.0 is available on the

smart phone or the tablet PC equipped

with fast charging capabilities. It is appli

-

cable to digital devices with USB C-type.

4

133

Features of your vehicle

Interior features

僅 Push the plug in as far as it will go. If

good contact is not made, the plug

may overheat and the fuse may open.

Power outlet (if equipped)

The power outlet is designed to provide

power for mobile telephones or other

devices designed to operate with vehicle

electrical systems or other devices that

are compatible with the power outlet

and vehicle electrical system.

僅 Plug in battery equipped electronic

devices with reverse current protec

tion. The current from the battery may

flow into the vehicle's electrical/elec

-

tronic system and cause system mal

function.

-

WARNING

Electric shock

Do not put a finger or a foreign object

(pen, etc.) into a power outlet and do not

touch with a wet hand. You may get an

electric shock.

Wireless smart phone charging

system (if equipped)

ONQ5031047N_2

The devices should draw less than 15

amps with the vehicle on.

A wireless smart phone charging system

is located in front of the center console.

NOTICE

僅 Use the power outlet only when the

vehicle is on and remove the acces

-

sory plug after use. Using the acces

-

sory plug for prolonged periods of

time with the vehicle off could cause

the battery to discharge.

ONQ5H031001

[A]: Indicator, [B]: Charging pad

僅 Only use 12 V electric accessories

which are less than 15 A in electric

capacity.

Firmly close all doors, and make sure to

turn ON the ignition switch or press the

ENGINE START/STOP button. To start

wireless charging, place the smart

phone equipped with wireless charging

function on the wireless charging pad.

僅 Adjust the air-conditioner or heater to

the lowest operating level when using

the power outlet.

僅 Close the cover when not in use.

For best wireless charging results, place

the smart phone on the center of the

charging pad.

僅 Some electronic devices can cause

electronic interference when plugged

into a vehicle's power outlet. These

devices may cause excessive audio

The wireless charging system is

designed for use with one compatible

smart phone at a time. Please consult

static and malfunctions in other elec

tronic systems or devices used in your

vehicle.

-

4

134

Features of your vehicle

Interior features

your smart phone or its manufacturer to

determine if it is compatible.

again, or double check the charging sta

tus.

-

If you leave the smart phone on the

charging pad when the vehicle ignition is

in OFF, the vehicle will alert you through

warning messages and sound (applica

ble for vehicles with voice guidance

function) after the 'Good bye' function

on the instrument cluster ends.

WARNING

If any metallic object such as coins is

located between the wireless charging

system and the smart phone, the

charging may be disrupted. Also, the

metallic object may heat up.

-

For some manufacturers' smart phones,

the system may not warn you even

though the smart phone is left on the

wireless charging unit. This is due to the

particular characteristic of the smart

phone and not a malfunction of the

wireless charging.

Wireless smart phone charging

1. Remove any object on the smart

phone charging pad including the

smart key. If there is any foreign

object on the pad other than a smart

phone, the wireless charging function

may not operate properly.

4

WARNING

2. Place the smart phone on the center

of the wireless charging pad.

Distracted driving

The driver's primary responsibility is the

safe and legal operation of a vehicle to

protect vehicle occupants and others

from serious injury or death. Driving

while distracted by anything could result

in a loss of vehicle control. Any use of

handheld devices, vehicle systems, or

other equipment that take the driver's

attention away from the driving task is

dangerous.

3. The indicator light will change to

orange once the wireless charging

begins. After the charging is com

-

plete, the orange light will change to

green.

4. You can choose to turn the wireless

charging function to either ON or OFF

by selecting the USM on the instru

ment cluster. (Please refer to "Instru

ment cluster" on page 4-62 for

details).

-

CAUTION

If the wireless charging does not work,

gently move your smart phone around

the pad until the charging indicator light

turns yellow. Depending on the smart

phone, the charging indicator light may

not turn green even after the charging is

complete.

Liquid in wireless charging system

To prevent liquid from damaging the

wireless smart phone charging system in

your vehicle, be sure not to spill liquid

over the charging system.

If the wireless charging is not function

-

CAUTION

ing properly, the orange light will blink

and flash for ten seconds then turn off.

In such cases, remove the smart phone

from the pad and replace it on the pad

Metal in wireless charging system

If any metallic object such as a coin is

located between the wireless charging

system and the smart phone, the

4

135

Features of your vehicle

Interior features

charging may be disrupted. Also, the

metallic object may heat up and poten

tially damage the charging system. If

there is any metallic object between the

smart phone and the charging pad,

immediately remove the smart phone.

Remove the metallic object after it has

cooled down.

僅 Place the smart phone on the center

of the charge pad for best results. The

smart phone may not charge when

placed near the rim of the charging

pad. When the smart phone does get

charged, it may heat up excessively.

-

僅 For smart phones without built-in

wireless charging system, an appro

-

priate accessory has to be equipped

in order to use the vehicle's wireless

charging system.

CAUTION

僅 When the interior temperature of the

wireless charging system rises above

a set temperature, the wireless

charging will cease to function. After

the interior temperature drops below

the threshold, the wireless charging

function will resume.

僅 Certain smart phones may display

messages on a weak current. This is

due to the particular characteristics of

that smart phone, and does not imply

a malfunction of the wireless charging

function.

僅 The indicator light of some manufac

turers' smart phones may still be

-

僅 The wireless charging may not func

tion properly when there is a heavy

-

orange after the smart phone is fully

charged. This is due to the particular

characteristic of the smart phone and

not a malfunction of the wireless

charging.

accessory cover on the smart phone.

僅 The wireless charging will stop when

using the wireless smart key search

function to prevent radio wave disrup

tion.

-

僅 When any smart phone without a

僅 The wireless charging will stop when

the smart key is moved out of the

vehicle with the vehicle in ON.

wireless charging function or a metal

lic object is placed on the charging

pad, a small noise may sound. This

-

僅 The wireless charging will stop when

small noise is due to the vehicle dis

cerning compatibility of the object

-

any of the doors are opened (applica

ble for vehicles equipped with smart

keys).

-

placed on the charging pad. It does

not affect your vehicle or the smart

phone in any way.

僅 The wireless charging will stop when

the vehicle is turned OFF.

僅 The wireless cellular phone charging

僅 The wireless charging will stop when

the smart phone is not in complete

contact with the wireless charging

pad.

system may not support certain cellu

lar phones, which are not verified for

-

the Qi specification (

).

僅 When placing your smart phone on

the charging pad, position the phone

僅 Items equipped with magnetic com

-

ponents such as credit card, tele

-

in the middle of the pad for maximum

efficiency.

phone card, bankbook or any

transportation ticket may become

damaged during wireless charging.

If your smart phone is off to the side,

the charging speed may slow down,

4

136

Features of your vehicle

Interior features

and in some cases, your phone may

experience higher heat conduction.

CAUTION

Hanging clothing

僅 When charging some smart phones

with a self-protection feature, the

wireless charging speed may

Do not hang heavy clothes, since they

may damage the hook.

decrease, and the charging may stop.

WARNING

僅 A smart phone that supports the wire

less charging can only be charged

wirelessly.

-

Do not hang other objects such as hang

ers or hard objects except clothes. Also,

do not put heavy, sharp or breakable

objects in the clothing's pockets. In an

accident or when the curtain air bag is

-

僅 The wireless charging pad has an

internal cooling system which can cre

ate noise to keep your phone cool

while it charges.

-

inflated, it may cause vehicle damage or

body injury.

This device complies with Indus

try Canada licence-exempt RSS

standard(s).

-

4

Operation is subject to the following two

conditions:

1. This device may not cause interfer

-

ence, and

2. This device must accept any interfer

-

ence, including interference that may

cause undesired operation of the

device.

OMQ4040469

Coat hook (if equipped)

Floor mat anchors

A Coat hook is next to the rear grab han

dle.

-

ONQ5031143L

ONQ5031528N

When using a floor mat on the front floor

carpet, make sure it attaches to the floor

mat anchors in your vehicle. This keeps

the floor mat from sliding forward.

* This actual feature may differ from the

illustration.

4

137

Features of your vehicle

Interior features

upwards by using the additional 2 hold

ers located on each side.

-

WARNING

僅 After market floor mat

- Do not install after market floor

mats that are not capable of being

securely attached to the vehicle's

floor mat anchors.

Unsecured floor mats can interfere

with pedal operation.

僅 Use floor mats not too thick and

designed to be properly secured on

the floor to avoid the interference with

pedals. Make sure that installing the

floor mats without removing plastic

films on carpets may damage or

break floor mat fix rings, resulting in

the mats to be unsecured. Especially

for a driver's seat, the unsecured mats

may cause unintended acceleration/

brake. Ensure to remove all the plastic

films on the carpets before installing

the mats.

ONQ5031062N_2

If you want to purchase them, please

contact an authorized Kia dealer.

CAUTION

To prevent damage to the goods or the

vehicle, be careful when carrying fragile

or bulky objects in the luggage compart

ment.

-

The following must be observed when

installing ANY floor mat to the vehicle.

WARNING

DO NOT over-stretch the luggage net

and ALWAYS keep your face and body

僅 Ensure that the floor mats are

securely attached to the vehicle's floor

out of the luggage net's recoil path. Fail

ure to comply with these instructions

may result in severe facial injuries. DO

NOT use the luggage net when the strap

has visible signs of wear or damage.

-

mat anchor(s) before driving the vehi

cle.

-

僅 Do not use ANY floor mat that cannot

be firmly attached to the vehicle's

floor mat anchors.

僅 Do not stack floor mats on top of one

another (e.g., all-weather rubber mat

on top of a carpeted floor mat). Only a

single floor mat should be installed in

each position.

Cargo security screen (if

equipped)

Use the cargo security screen to hide

items stored in the cargo area.

Luggage net holder

To keep items from shifting in the cargo

area, you can use the 4 holders located

in the cargo area to attach the luggage

net (if equipped), or you can fold the

luggage net into half and attach it

4

138

Features of your vehicle

Interior features

line engine and mini temporary spare

tire equipped in luggage).

WARNING

僅 Do not place objects on the cargo

security screen. Such objects may

move around inside the vehicle and

possibly injure vehicle occupants

during an accident or when braking.

僅 Never allow anyone to ride in the lug

-

gage compartment. It is designed for

luggage only.

ONQ5H031024

僅 Maintain the balance of the vehicle

and locate the weight as forward as

possible.

1. Cargo security screen handle

2. Cargo security screen guide

To use the cargo security screen, pull the

handle backward and insert the edges

into the slots.

4

NOTICE

僅 Since the cargo security screen may

be damaged or malformed, do not put

luggage on it when it is used.

僅 Pull out the cargo security screen

using the handle in the center to pre

-

vent the guide pin from falling out of

the guide.

僅 The cargo security screen may not

automatically slide back in if the cargo

security screen is not fully pulled out.

Fully pull it out and then let go.

ONQ5031364L

ONQ5051105N

When not in use cargo security screen,

follow below steps.

1. Push the guide pin in the direction.

2. Pull the cargo security screen out.

3. Open the luggage board(1) and side

tray cover (2) and keep the cargo

security screen in the tray (3) (if gaso

-

4

139

Features of your vehicle

Exterior features

僅 If the vehicle is equipped with a sun

roof, be sure not to position cargo

onto the roof rack in such a way that it

-

Exterior features

Roof rack (if equipped)

If the vehicle has a roof rack, you can

load cargo on top of your vehicle.

could interfere with sunroof opera

tion.

-

僅 When the roof rack is not being used

to carry cargo, the crossbars may

need to be repositioned if wind noise

is detected.

Type A

CAUTION

僅 When carrying cargo on the roof rack,

take the necessary precautions to

ONQ5H031019

Type B

make sure the cargo does not dam

-

age the roof of the vehicle.

僅 When carrying large objects on the

roof rack, make sure they do not

exceed the overall roof length or

width.

僅 When you are carrying cargo on the

roof rack, do not operate the sunroof.

(if equipped)

ONQ5H031036

* The actual shape may differ from the

illustration.

Crossbars and fixing components

WARNING

needed to install the roof rack on your

vehicle may be obtained from an autho

rized Kia dealer or other qualified shop.

-

僅 The following specification is the max

imum weight that can be loaded onto

the roof rack. Distribute the load as

-

NOTICE

evenly as possible across the cross

-

僅 The crossbars (if equipped) should be

placed in the proper load carrying

positions prior to placing items onto

the roof rack.

bars (if equipped) and roof rack and

secure the load firmly.

100 kg (220 lbs.)

ROOF LOAD

EVENLY DISTRIBUTED

Loading cargo or luggage in excess of

the specified weight limit on the roof

rack may damage your vehicle.

vers or high speeds that may result in

loss of vehicle control or rollover

resulting in an accident.

僅 The vehicle center of gravity will be

higher when items are loaded onto

the roof rack. Avoid sudden starts,

僅 Always drive slowly and turn corners

carefully when carrying items on the

roof rack. Severe wind updrafts,

braking, sharp turns, abrupt maneu

-

caused by passing vehicles or natural

4

140

Features of your vehicle

Infotainment system

causes, can cause sudden upward

pressure on items loaded on the roof

Infotainment system

NOTICE

rack. This is especially true when car

rying large, flat items such as wood

panels or mattresses. This could

cause the items to fall off the roof

rack and cause damage to your vehi

cle or others around you.

-

If you install an aftermarket HID head

lamp, your vehicle's audio and electronic

device may malfunction.

-

Using the infotainment/climate

switchable controller

僅 To prevent damage or loss of cargo,

FREQUENTLY check to ensure the

cargo is securely fastened to the roof

rack.

4

OCV041315

Press the button on the switchable con

troller to switch between infotainment

system or climate control panel.

-

Press and hold the button to select the

default mode for the control panel.

Switching between panels

Infotainment control panel

OCV041316

Climate control panel

ONQ5031382L

Press the button on the switchable con

-

troller to select the desired control panel.

4

141

Features of your vehicle

Infotainment system

The selected control panel icon will

appear and the control panel will be

changed.

Sharkfin antenna

僅 The knob display will appear accord

ing to the selected control panel

mode.

-

僅 When the vehicle is in the ACC posi

tion, only the infotainment system will

be activated.

-

ONQ5EP031020L

The shark fin antenna receives data

transmitted from base stations and sat

-

ellites (e.g. AM/FM, GPS, Sirius XM, LTE)

and also transmits to base stations (e.g.

LTE).

Setting the default mode

* The signals which antenna can transmit

and receive vary by the vehicle option.

NOTICE

Avoid adding metallic coatings such as

Ni, Cd, etc. These can degrade the

receiving AM and FM broadcast signals.

OCV041559L

Press and hold the button to select the

default mode for the control panel.

僅 After the setting, the control panel will

USB port

return to the default mode after a cer

tain period of time even if the control

panel is switched to the different

mode.

-

You can use the USB port to plug in an

USB.

僅 If the mode is set to 'OFF', the control

panel will display the mode used

recently.

Audio system

NOTICE

ONQ5031048

CAUTION

If you install an aftermarket HID head

lamp, your vehicle's audio and electronic

device may malfunction.

-

Depending on the size, length, or shape

of the USB stick, if you forcibly close the

tray cover, the USB device may be dam

aged, deformed or the cover may not

reopen as the device is stuck.

-

* If your vehicle is equipped with info

tainment system, refer to a separately

-

When the stick is stuck, forcibly opening

the cover can also cause damage to the

device.

supplied manual for detailed informa

tion.

-

If the USB stick does not fit into the

space, do not close the cover and try

4

142

Features of your vehicle

Infotainment system

another USB stick with different specifi

cations.

-

AM reception

How vehicle radio works

FM reception

OGL3061070L

AM broadcasts can be received at

greater distances than FM broadcasts.

This is because AM radio waves are

transmitted at low frequencies. These

long distance, low frequency radio

waves can follow the curvature of the

earth rather than traveling straight. In

addition, they curve around obstructions

resulting in better signal coverage.

4

OGL3061067L

AM and FM radio signals are broadcast

from transmitter towers located around

your city. They are intercepted by the

radio antenna on your vehicle. This sig

nal is then processed by the radio and

sent to your vehicle speakers.

-

FM radio station

However, in some cases the signal com

ing to your vehicle may not be strong

and clear.

-

This can be due to factors, such as the

distance from the radio station, close

-

ness of other strong radio stations or the

presence of buildings, bridges or other

large obstructions in the area.

OGL3061069L

FM broadcasts are transmitted at high

frequencies and do not bend to follow

the earth's surface. Because of this, FM

broadcasts generally begin to fade

within short distances from the station.

Also, FM signals are easily affected by

buildings, mountains, and obstructions.

4

143

Features of your vehicle

Infotainment system

This can lead to undesirable or unpleas

-

ant listening conditions which might lead

you to believe a problem exists with your

radio.

The following conditions are normal and

do not indicate radio trouble:

僅 Fading - As your vehicle moves away

from the radio station, the signal will

weaken and sound will begin to fade.

When this occurs, we suggest that you

select another station with a stronger

signal.

OGL3061068L

僅 Multi-Path Cancellation - Radio sig

nals being received from several

directions can cause distortion or flut

-

tering. This can be caused by a direct

and reflected signal from the same

station, or by signals from two sta

-

tions with close frequencies. If this

occurs, select another station until the

condition has passed.

Using a cellular phone or a two-

way radio

OGL3061071L

僅 Flutter/Static - Weak FM signals or

large obstructions between the trans

When a cellular phone is used inside the

vehicle, noise may be produced from the

audio system. This does not mean that

something is wrong with the audio

equipment. In such a case, try to operate

mobile devices as far from the audio

equipment as possible.

-

mitter and your radio can disturb the

signal causing static or fluttering

noises to occur. Reducing the treble

level may lessen this effect until the

disturbance clears.

僅 Station Swapping - As an FM signal

When using a communication system

such as a cellular phone or a radio set

inside the vehicle, a separate external

antenna must be fitted. When a cellular

phone or a radio set is used with only the

internal antenna, it may interfere with

the vehicle's electrical system and

adversely affect the safe operation of

the vehicle.

weakens, another more powerful sig

nal near the same frequency may

begin to play. This is because your

radio is designed to lock onto the

clearest signal. If this occurs, select

another station with a stronger signal.

-

4

144

Features of your vehicle

Declaration of Conformity

WARNING

Cell phone use

IC

Do not use a cellular phone while driv

ing. Stop at a safe location to use a cellu

lar phone.

-

This device complies with Industry Can

ada's licence-exempt RSSs. Operation is

subject to the following two conditions:

-

1. This device may not cause interfer

-

ence; and

WARNING

2. This device must accept any interfer

-

Distracted driving

ence, including interference that may

cause undesired operation of the

device.

Driving while distracted can result in a

loss of vehicle control that may lead to

an accident, severe bodily injury, or

Le pr썗sent appareil est conforme aux

CNR d'Industrie Canada applicables aux

appareils radio exempts de licence.

L'exploitation est autoris썗e aux deux

conditions suivantes:

death. The driver's primary responsibility

is in the safe and legal operation of a

vehicle. Any use of handheld devices,

other equipment, or vehicle systems that

take the driver's eyes, attention, and

focus away from the safe operation of a

vehicle are not permissable by law.

These should never be used during the

operation of the vehicle.

4

1. l'appareil ne doit pas produire de

brouillage, et

2. l'utilisateur de l'appareil doit accepter

tout brouillage radio썗lectrique subi,

m썛me si le brouillage est susceptible

d'en compromettre le fonctionne

ment.

-

CAUTION

Any changes or modifications to this

device that is not explicitly approved by

the manufacturer could void your

authority to operate this equipment.

This equipment complies with IC radia

tion exposure limits set forth for an

uncontrolled environment.

-

This equipment should be installed and

operated with minimum 20 cm (8

inches) between the radiator and your

body. This transmitter must not be collo

cated or operating in conjunction with

any other antenna or transmitter unless

authorized to do so by the IC.

-

4

145

Features of your vehicle for Your Kia Sportage SUV Fifth Generation (2022-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals