Features of your vehicle
Manual climate control system
passenger compartment is to do the fol
-
With the outside (fresh) air position
lowing.
selected, air enters the vehicle from out
side and is heated or cooled according
to the function selected.
-
僅 Turn off or lower the blower, right
after starting the engine.
僅 Engine temperature is still low and the
air flow from the heater is still cold.
NOTICE
Prolonged operation of the heater in the
僅 After a few minutes of engine warm
up, turn on or set the fan to a higher
recirculated air position (without air con
ditioning selected) may cause fogging of
the windshield and side windows, and
-
level and adjust the temperature set
-
ting to hot.
the air within the passenger compart
-
ment may become stale.
Controlling air intake
In addition, prolonged use of the air con
-
The air intake control is used to select
ditioning with the recirculated air posi
-
the outside (fresh) air position or recircu
lated air position.
-
tion selected will result in excessively dry
air in the passenger compartment.
4
Without outside air position button
WARNING
僅 Continuously using the climate control
system in the recirculated air position
may allow humidity to increase inside
the vehicle, which may fog the glass
and obscure visibility.
ONQ5031312N
僅 Do not sleep in a vehicle with the air
conditioning or heating system on. It
may cause serious harm or death due
to a drop in the oxygen level and/or
body temperature.
To change the air intake control position.
僅 Push the desired control button
Recirculated air position
The indicator light on the but
ton appears when the recircu
lated air position is selected.
-
-
僅 Continuously using the climate control
system in the recirculated air position
can cause drowsiness or sleepiness,
and loss of vehicle control. Set the air
intake control to the outside (fresh) air
position as much as possible while
driving.
With the recirculated air position
selected, air from the passenger com
partment will be drawn through the
-
heating system and heated or cooled
according to the function selected.
Controlling fan speed
Outside (fresh) air position
The fan speed control knob allows you
to control the fan speed of the air flow
ing from the ventilation system.
-
The indicator light on the but
-
ton will turn off when the out
side (fresh) air position is
selected.
-
The ENGINE START/STOP button must
be in the ON position for fan operation.
4
113
English 
