Features of your vehicle
Automatic climate control system
The temperature will increase to the
maximum (HI) by turning the knob all
the way to the right.
1. Press the "SYNC" button to adjust the
driver and passenger side tempera
-
ture equally.
The temperature will decrease to the
minimum (Lo) by turning the knob all the
way to the left.
The passenger side temperature will
be set to the same temperature as the
driver side temperature.
When turning the knob, the temperature
will increase or decrease by 0.5 °C/1 °F.
2. Turn the driver side temperature con
trol knob. The driver and passenger
side temperature will be adjusted
equally.
-
When set to the lowest temperature set
ting, the air conditioning will operate
continuously.
-
3. If you rotate the passenger's tempera
ture control knob, the SYNC button is
turned off and the passenger side
-
NOTICE
When starting the vehicle in cold
temperature can be operated individ
-
weather using manual temperature con
trol, operate the system in the following
method to improve heating.
-
ually.
4
Adjusting the driver and passen
-
ger side temperature individually
僅 Turn off or lower the blower, right
after starting the engine.
Press the "SYNC" button again to adjust
the driver and passenger side tempera
ture individually. The button indicator
will turn off.
-
僅 Allow the engine to warm up during
this time since the air flow from the
heater is still cold.
僅 After a few minutes of engine warm
up, turn on or set the fan to a higher
Changing temperature scale
僅 To change the temperature display
from Fahrenheit to Celsius and vice
versa, press the OFF button, while
level and adjust the temperature set
-
ting to hot.
pressing the AUTO button for 3 sec
-
onds or more.
Adjusting the driver and passen
ger side temperature equally
-
The display will change from Centigrade
to Fahrenheit, or from Fahrenheit to
Centigrade. If the battery has been dis
-
charged or disconnected, the tempera
ture mode display will reset to
Fahrenheit.
-
OGL3041321
4
121