Features of your vehicle
Driver Position Memory System
4. "Settings 1 (or 2) saved" will appear on
the LCD display.
Driver Position Memory Sys
tem (if equipped)
-
Recalling memory positions
The Driver Position Memory System is
provided to store and recall the following
memory settings with a simple button
operation.
1. The ignition switch or ENGINE START/
STOP button is in the ON position.
2. Press the desired memory button (1 or
2). The system will beep once, and
then the driver's seat position, instru
-
ment panel illumination intensity will
automatically adjust to the stored
positions.
3. "Settings 1 (or 2) applied" will appear
on the LCD display.
ONQ5031006
僅 Driver's seat position
僅 While recalling the "1" memory posi
tion, pressing 1 button temporarily
-
僅 Instrument panel illumination intensity
stops the adjustment of the recalled
memory position. Pressing the 2 but
ton recalls the "2" memory position.
-
Never attempt to operate the driver
position memory system while the vehi
-
僅 While recalling the "2" memory posi
-
cle is moving.
tion, pressing the SET or 2 button
temporarily stops the adjustment of
the recalled memory position. Press
This could result in loss of control, and
an accident causing death, serious
injury, or property damage.
-
ing the 1 button recalls the "1" memory
position.
僅 While recalling the stored positions,
pressing one of the control buttons
for the driver's seat, outside rear view
僅 If the battery is disconnected, the
memory settings will be erased.
僅 If the Driver Position Memory System
does not operate normally, have the
system checked by an authorized Kia
dealer.
mirror, or instrument panel illumina
-
tion will cause the movement of that
component to stop and move in the
direction that the control button is
pressed.
Storing memory positions
Driver position memory system
reset
1. The ignition switch or ENGINE START/
STOP button is in the ON position.
If the Driver position memory system
2. Adjust the driver's seat position,
instrument panel illumination intensity
to the desired position.
does not work properly, initialize the sys
tem as follows.
-
How to initialize:
3. Press one of the memory buttons (1 or
2) for more than 1 second. The system
will beep twice.
1. Stop the vehicle and open the driver's
door with the ignition switch or
ENGINE START/STOP button in the
4
22
English 
