Get When Driving -> Instrument Cluster and Display Guide for Mazda Mx-5 SUV Fourth Generation (2016-2026)

When Driving

Instrument Cluster and Display

Meters and Gauges

Instrument Cluster

Type A

(With Multi-information Display)

Type B

(Without Multi-information Display)

Steering Switch

① Speedometer..........................................................................................................page 4-13

② Odometer, Trip Meter and Trip Meter Selector.................................................... page 4-13

③ Tachometer............................................................................................................page 4-14

④ Engine Coolant Temperature Gauge..................................................................... page 4-15

⑤ Fuel Gauge............................................................................................................ page 4-15

⑥ Dashboard Illumination.........................................................................................page 4-16

⑦ Outside Temperature Display................................................................................page 4-17

⑧ Cruise Control Set Vehicle Speed Display............................................................page 4-17

⑨ Trip Computer and INFO Switch..........................................................................page 4-17

⑩ Multi-information Display and INFO Switch.......................................................page 4-19

4-12

When Driving

Instrument Cluster and Display

NOTE

Speedometer

▼

When the ignition is switched to ACC or

off, the odometer or trip meters cannot be

displayed, however, pressing the selector

can inadvertently switch the trip meters or

reset them during an approximate

ten-minute period in the following cases:

The speedometer indicates the speed of the

vehicle.

Odometer, Trip Meter and Trip

▼

Meter Selector (Without

Multi-information Display)



After the ignition is switched to off from

The display mode can be changed from

odometer to trip meter A to trip meter B

and then back to odometer by pressing the

selector while one of them is displayed.

The selected mode will be displayed.

ON.



After the driver's door is opened.

Odometer

The odometer records the total distance

the vehicle has been driven.

Selector

Trip meter

The trip meter can record the total distance

of two trips. One is recorded in trip meter

A, and the other is recorded in trip meter

B.

For instance, trip meter A can record the

distance from the point of origin, and trip

meter B can record the distance from

where the fuel tank is filled.

Odometer

Press the selector

Trip meter A

When trip meter A is selected, pressing the

selector again within one second will

change to trip meter B mode.

Press the selector

Trip meter B

When trip meter A is selected, TRIP A

will be displayed. When trip meter B is

selected, TRIP B will be displayed.

Press the selector

4-13

When Driving

Instrument Cluster and Display

The trip meter records the total distance

the vehicle is driven until the meter is

again reset. Return it to “0.0” by

depressing and holding the selector for one

second or more. Use this meter to measure

trip distances and to compute fuel

consumption.

Tachometer

▼

The tachometer shows engine speed in

thousands of revolutions per minute (rpm).

CAUTION

Do not run the engine with the tachometer

needle in the RED ZONE.

This may cause severe engine damage.

NOTE



If TRIP A is reset using the trip meter

when the function which synchronizes

(resets) the fuel economy monitor and

the trip meter (TRIP A) is on, the fuel

economy data resets in conjunction with

TRIP A.

Striped zone

Red zone

Refer to Fuel Economy Monitor on page

4-69.

Only the trip meters record tenths of



kilometers (miles).

The trip record will be erased when:



The power supply is interrupted

NOTE

(blown fuse or the battery is

disconnected).

The vehicle is driven over 9999.9 km

When the tachometer needle enters the

STRIPED ZONE, this indicates to the

driver that the gears should be shifted

before entering the RED ZONE.



(mile).

4-14

When Driving

Instrument Cluster and Display

Engine Coolant Temperature Gauge

(Without Multi-information

Display)

Fuel Gauge (Without

Multi-information Display)

▼

The fuel gauge shows approximately how

much fuel is remaining in the tank when

the ignition is switched ON. We

Indicates engine coolant temperature.

recommend keeping the tank over 1/4 full.

Full

CAUTION

If the high engine coolant temperature

warning light (red) ꢀashes, there is a

possibility of overheating. Drive slowly to

reduce engine load until you can ꢁnd a safe

place to stop the vehicle and wait for the

engine to cool down.

1/4 Full

Refer to Overheating on page 7-27.

Empty

NOTE



The temperature unit (Centigrade/

Fahrenheit) of the engine coolant gauge

display changes in conjunction with the

temperature unit of the outside

temperature display.

Refer to Personalization Features on

page 9-9.

If the low fuel warning light illuminates or

the fuel level is very low, refuel as soon as

possible.

If inconsistency in engine performance or

stalling occurs due to low fuel level

conditions, refuel the vehicle as soon as

possible and add at least 10 L (2.7 US gal,

2.2 Imp gal) of fuel.



During normal driving, the engine

coolant temperature stabilizes at 100 °C

(210 °F) or less, and the gauge indicates

a range lower than 100 °C (210 °F).



If the engine load increases and the

Refer to Taking Action on page 7-40.

engine coolant temperature exceeds

100 °C (210 °F), the gauge indicates the

engine coolant temperature.

NOTE



After refueling, it may require some time

for the indicator to stabilize. In addition,

the indicator may deviate while driving

on a slope or curve since the fuel moves

in the tank.

4-15

When Driving

Instrument Cluster and Display



The display indicating a quarter or less

The brightness decreases by rotating the

knob to the left. A beep sound will be

heard when the knob has been rotated to

the maximum dim position.

The brightness increases by rotating the

knob to the right.

remaining fuel has more segments to

show the remaining fuel level in greater

detail.

The direction of the arrow ( ) indicates

that the fuel-filler lid is on the left side

of the vehicle.



Dim

Dashboard Illumination

▼

(Without auto-light control)

When the position lights are turned on

with the ignition switched ON, the

brightness of the dashboard illumination is

dimmed.

Bright

(With auto-light control)

When the position lights are turned on

with the ignition switched ON, the

brightness of the dashboard illumination is

dimmed. However, when the light sensor

detects that the surrounding area is bright

such as when the position lights are turned

on in the daytime, the dashboard

illumination does not dim.

Function for cancelling illumination

dimmer

The illumination dimmer can be canceled

by rotating the dashboard illumination

knob to the right until a beep sound is

heard while the instrument cluster is

dimmed with the ignition switched ON. If

the instrument cluster's visibility is

reduced due to glare from surrounding

brightness, cancel the illumination

dimmer.

NOTE



(With auto-light control)

When the ignition is switched ON in the

early evening or at dusk, the dashboard

illumination is dimmed for several

seconds until the light sensor detects the

brightness of the surrounding area,

however, the dimmer may cancel after

the brightness is detected.

NOTE



When the illumination dimmer is

canceled, the instrument cluster cannot

be dimmed even if the position lights are

turned on.



When the position lights are turned on,

the position lights indicator light in the

instrument cluster turns on.

Refer to Headlights on page 4-45.



When the illumination dimmer is

canceled, the screen in the center

display switches to constant display of

the daytime screen.

The brightness of the instrument cluster

and dashboard illuminations can be

adjusted by rotating the knob.

4-16

When Driving

Instrument Cluster and Display

Outside Temperature Display

(Without Multi-information

Display)

Cruise Control Set Vehicle Speed

Display (Without Multi-information

Display)^*

▼

When the ignition is switched ON, the

outside temperature is displayed.

The vehicle speed preset using the cruise

control is displayed.

NOTE



Under the following conditions, the

Trip Computer and INFO Switch

▼

outside temperature display may differ

from the actual outside temperature

depending on the surroundings and

vehicle conditions:

(Without Multi-information

Display)

The following information can be selected

by pressing the INFO switch with the

ignition switched ON.



Significantly cold or hot temperatures.

Sudden changes in outside



Approximate distance you can travel on

the available fuel

Average fuel economy

Current fuel economy

temperature.

The vehicle is parked.

The vehicle is driven at low speeds.



Changing the Temperature Unit of the

Outside Temperature Display



Average vehicle speed

If you have any problems with your trip

computer, consult an Authorized Mazda

Dealer.

The outside temperature unit can be

switched between Celsius and Fahrenheit

using the following procedure.

Settings can be changed by operating the

center display screen.

Distance-to-empty mode

This mode displays the approximate

distance you can travel on the remaining

fuel based on the fuel economy.

Refer to Personalization Features on page

9-9.

NOTE

The distance-to-empty will be calculated

and displayed every second.

When the temperature unit indicated in the

outside temperature display is changed,

the temperature unit indicated in the

engine coolant gauge display changes in

conjunction with it.

*Some models.

4-17

When Driving

Instrument Cluster and Display

NOTE

If TRIP A is reset using the trip meter

when the function which synchronizes

(resets) the fuel economy monitor and the

trip meter (TRIP A) is on, the displayed

past data is reset.



Even though the distance-to-empty

display may indicate a sufficient amount

of remaining driving distance before

refueling is required, refuel as soon as

possible if the fuel level is very low or

the low fuel warning light illuminates.

The display may not change unless you

add more than approximately 9 L (2.3

US gal, 1.9 Imp gal) of fuel.

Current fuel economy mode



This mode displays the current fuel

economy by calculating the amount of fuel

consumption and the distance traveled.



The distance-to-empty is the

approximate remaining distance the

vehicle can be driven until all the

graduation marks in the fuel gauge

(indicating the remaining fuel supply)

disappear.

Current fuel economy will be calculated

and displayed every 2 seconds.



If there is no past fuel economy

information such as after first

purchasing your vehicle or the

information is deleted when the battery

cables are disconnected, the actual

distance-to empty/range may differ from

the amount indicated.

When you've slowed to about 5 km/h (3

mph), - - - L/100 km (- - - mpg) will be

displayed.

Average vehicle speed mode

This mode displays the average vehicle

speed by calculating the distance and the

time traveled since connecting the battery

or resetting the data.

Average vehicle speed will be calculated

and displayed every 10 seconds.

Average fuel economy mode

This mode displays the average fuel

economy by calculating the total traveled

distance and the total fuel consumption

since the vehicle was purchased or the past

data was reset. The average fuel economy

is calculated and displayed every minute.

To clear the data being displayed, press the

INFO switch for more than 1.5 seconds.

After pressing the INFO switch, - - - km/h

(- - - mph) will be displayed for about 1

minute before the vehicle speed is

To reset the displayed past data, press the

INFO switch for 1.5 seconds or longer.

After resetting the data, - - - L/100 km

(- - - mpg) is displayed for one minute

before the fuel economy is recalculated

and displayed.

recalculated and displayed.

4-18

When Driving

Instrument Cluster and Display

Multi-information Display and INFO Switch^*

Multi-information Display

INFO switch

The multi-information display indicates the following information.



Odometer

Trip meter

Engine coolant temperature gauge

Fuel gauge

Outside temperature

Distance-to-empty

Average fuel economy

Current fuel economy

Maintenance Monitor

Traffic Sign Recognition System (TSR) Display

Lane Departure Warning System (LDWS) Display

Cruise Control Display

Compass Display

Roof Operation Display (Hardtop)

Message Display



*Some models.

4-19

When Driving

Instrument Cluster and Display

The screen content changes each time the INFO switch is pressed.

Engine Coolant

Temperature Gauge,

Trip Meter A, Average

Fuel Economy, Current

Press the INFO switch

*1

Warning message,

Fuel Economy, Outside

Temperature,

Odometer, Fuel Gauge

Outside

Press the INFO switch

Temperature,

Odometer, Fuel

Gauge

Engine Coolant

Temperature Gauge,

Trip Meter B, Average

Fuel Economy, Current

Fuel Economy, Outside

Temperature,

Press the INFO switch

*2

Odometer, Fuel Gauge

Engine Coolant

Temperature Gauge,

Compass,

Press the INFO switch

Distance-to-empty,

Outside Temperature,

Odometer, Fuel Gauge

Engine Coolant

Temperature Gauge,

Maintenance Monitor,

Outside Temperature,

Odometer, Fuel Gauge

Press the INFO switch

*1: Displayed only when a warning occurs.

*2: Displayed only while vehicle is being driven.

4-20

When Driving

Instrument Cluster and Display

Odometer

Odometer, Trip Meter and Trip

Meter Selector

▼

The odometer records the total distance

the vehicle has been driven.

The odometer is constantly displayed on

the screen when the ignition is switched

ON, and the TRIP A or TRIP B screen can

be displayed by operating the INFO

switch.

Trip meter

The driving distance for a specified

interval is indicated. Two types (TRIP A,

TRIP B) of interval distance and the

average fuel economy for each can be

measured.

INFO switch

For instance, trip meter A can record the

distance from the point of origin, and trip

meter B can record the distance from

where the fuel tank is filled.

Trip meter A,

Odometer

When trip meter A is selected, TRIP A

will be displayed. When trip meter B is

selected, TRIP B will be displayed.

Press the INFO switch

The trip meter and average fuel economy

can be reset by pressing the INFO switch

for 1.5 seconds or more while in each

mode.

Trip meter B,

Odometer

NOTE



Only the trip meters record tenths of

kilometers (miles).

The trip record will be erased when:



The power supply is interrupted

(blown fuse or the battery is

disconnected).

The vehicle is driven over 9999.9 km



(mile).

4-21

When Driving

Instrument Cluster and Display

Engine Coolant Temperature Gauge

Fuel Gauge

▼

Displays the engine coolant temperature.

The blue gauge indicates that the engine

coolant temperature is low, and the red

gauge indicates that the engine coolant

temperature is high and overheating.

The fuel gauge shows approximately how

much fuel is remaining in the tank when

the ignition is switched ON. We

recommend keeping the tank over 1/4 full.

Full

The engine coolant temperature gauge can

be switched to indicate only the high

engine coolant temperature range by

pressing the panel light control switch.

1/4 Full

CAUTION

Empty

If the high engine coolant temperature

warning light (red) ꢀashes, there is a

possibility of overheating. Drive slowly to

reduce engine load until you can ꢁnd a safe

place to stop the vehicle and wait for the

engine to cool down.

If the fuel level is low, ( ) and ( ) turn an

amber color. Refuel as soon as possible.

If inconsistency in engine performance or

stalling occurs due to low fuel level

conditions, refuel the vehicle as soon as

possible and add at least 10 L (2.7 US gal,

2.2 Imp gal) of fuel.

Refer to Overheating on page 7-27.

NOTE



The temperature unit (Centigrade/

Fahrenheit) of the engine coolant gauge

display changes in conjunction with the

temperature unit of the outside

temperature display.

Refer to Taking Action on page 7-40.

Refer to Personalization Features on

page 9-9.

4-22

When Driving

Instrument Cluster and Display

NOTE

Changing the Temperature Unit of the

Outside Temperature Display



After refueling, it may require some time

for the indicator to stabilize. In addition,

the indicator may deviate while driving

on a slope or curve since the fuel moves

in the tank.

The display indicating a quarter or less

remaining fuel has more segments to

show the remaining fuel level in greater

detail.

The outside temperature unit can be

switched between Celsius and Fahrenheit

using the following procedure.

Settings can be changed by operating the

center display screen.



Refer to Personalization Features on page

9-9.

NOTE



The direction of the arrow ( ) indicates

that the fuel-filler lid is on the left side

of the vehicle.

When the temperature unit indicated in the

outside temperature display is changed,

the temperature unit indicated in the

engine coolant gauge display changes in

conjunction with it.

Outside Temperature Display

▼

When the ignition is switched ON, the

outside temperature is displayed.

Distance-to-empty

▼

This displays the approximate distance

you can travel on the remaining fuel based

on the fuel economy.

The distance-to-empty will be calculated

and displayed every second.

NOTE



Under the following conditions, the

outside temperature display may differ

from the actual outside temperature

depending on the surroundings and

vehicle conditions:

NOTE



Significantly cold or hot temperatures.



Even though the distance-to-empty



Sudden changes in outside

display may indicate a sufficient amount

of remaining driving distance before

refueling is required, refuel as soon as

possible if the fuel level is very low or

the low fuel warning light illuminates.

temperature.

The vehicle is parked.

The vehicle is driven at low speeds.



The display will not change unless you

add more than approximately 9 L (2.3

US gal, 1.9 Imp gal) of fuel.

4-23

When Driving

Instrument Cluster and Display



The distance-to-empty is the

Current Fuel Economy

▼

approximate remaining distance the

vehicle can be driven until all the

graduation marks in the fuel gauge

indicating the remaining fuel supply

disappear.

This displays the current fuel economy by

calculating the amount of fuel

consumption and the distance traveled.

Current fuel economy will be calculated

and displayed every two seconds.



If there is no past fuel economy

information such as after first

purchasing your vehicle or the

information is deleted when the battery

cables are disconnected, the actual

distance-to empty/range may differ from

the amount indicated.

When you've slowed to about 5 km/h (3

mph), - - - L/100 km (- - - mpg) will be

displayed.

Average Fuel Economy

▼

The average fuel economy is calculated

every minute from the total traveled

distance on the trip meter and the total fuel

consumption, and the average fuel

economy for either TRIP A or TRIP B is

displayed.

Maintenance Monitor

▼

The following maintenance period

notifications can be displayed by turning

the Maintenance Monitor on.



Scheduled Maintenance

Tire Rotation

Oil Change



For the setting method and indications for

the maintenance monitor, refer to the

Maintenance Monitor.

Refer to Maintenance Monitor on page

6-15.

The maintenance monitor displays the

information when the ignition is switched

ON.

The average fuel economy and trip meters

can be reset by pressing the INFO switch

for 1.5 seconds or more while in each

mode. After the data is cleared, the fuel

consumption is recalculated and the - - -

L/100 km (- - - mpg) for the 1 minute prior

to it being displayed is indicated.

NOTE

This function is inoperable while the

vehicle is being driven.

4-24

When Driving

Instrument Cluster and Display

Message display

Lane Departure Warning System

(LDWS) Display^*

▼

When the remaining days to the

maintenance period is 15 days or less, or

the remaining distance is 1,000 km (600

miles) or shorter, a message is indicated

when the ignition is switched ON.

Displays the system status.

NOTE

Refer to Lane Departure Warning on page

4-86.



If any of the INFO switch is pressed

while a message is displayed, it will no

longer be displayed the next time the

ignition is switched ON.

Cruise Control Set Vehicle Speed

▼

Display



After the vehicle is serviced and the

The vehicle speed preset using the cruise

control is displayed.

remaining time/distance is reset, the

message for the next maintenance

period will be displayed when the

remaining distance or time to the next

maintenance period approaches 0

(displays when engine is started).



If there are multiple messages, they are

displayed according to their order.

If OFF is set for Messages, messages

Refer to Cruise Control on page 4-111.



are not displayed.

Traffic Sign Recognition System

▼

(TSR) Display^*

Displays the traffic sign.

Refer to Traffic Sign Recognition System

(TSR) on page 4-92.

*Some models.

4-25

When Driving

Instrument Cluster and Display

Compass Display

Message Display

▼

The direction the vehicle is moving is

displayed in one of the eight cardinal

directions while the vehicle is being

driven.

A message such as the system operation

status, a malfunction, or an abnormality is

indicated.

Warning/indicator light in instrument

cluster turns on/flashes or symbol is

indicated on display at same time as

message

Display

N

Direction

North

Check the information regarding the

warning/indicator light or indicated

symbol.

S

South

Refer to If a Warning Indication/Warning

Lights on page 4-27.

E

East

W

West

Refer to If a Indication/Indicator Lights on

page 4-29.

NE

NW

SE

Northeast

Northwest

Southeast

Southwest

Message only is indicated on display

SW

Follow the instructions indicated on the

display. For the display content, refer to

the next page.

Refer to If a Message Indicated on

Multi-information Display on page 7-45.

Roof Operation Display (Hardtop)

▼

Displays the roof operation status.

Refer to Operation Indication on page

3-43.

4-26

When Driving

Instrument Cluster and Display

Warning/Indicator Lights

Instrument Cluster varies depending on model and specifications.

Instrument Cluster

Type A

(With Multi-information Display)

Type B

(Without Multi-information Display)

Center of Dashboard

Warning/Indicator lights will appear in any of the highlighted areas

Warning Indication/Warning Lights

▼

These lights turn on or flash to notify the user of the system operation status or a system

malfunction.

Signal

Warning Lights

Page

*1*2

7-33

Brake System Warning Light

*1

7-33

Charging System Warning Indication/Warning Light

*1

Engine Oil Warning Light

High Engine Coolant Temperature Warning Indication/Warning

Light

7-33

*1

(Red)

Power Steering Malfunction Indication/Malfunction Indicator

Light

7-33

7-36

*1

*

*1

Master Warning Indication/Warning Light

*1

Electric Vacuum Pump Warning Light

*Some models.

4-27

When Driving

Instrument Cluster and Display

Signal

Warning Lights

Page

Electronic Brake Force

Distribution System

Warning

*1

ABS Warning Light

7-33

ABS warning

7-36

Check Engine Light

*

*1

Automatic Transmission Warning Indication/Warning Light

*1

7-36

Air Bag/Seat Belt Pretensioner System Warning Light

Flashing

7-36

*1

Tire Pressure Monitoring System Warning Light

Turns on

7-40

Turns on

7-36

*

*1

KEY Warning Light

Flashing

7-40

(Red)

*

7-36

KEY Warning Indication

(Amber)

Turns on

7-36

*

Lane Departure Warning System (LDWS) Warning Indication/

*1

Warning Light

Flashing

4-86

*

High Beam Control System (HBC) Warning Indication/Warn‐

7-36

*1

ing Light

(Amber)

*

7-36

Blind Spot Monitoring (BSM) Warning Indication

*

Retractable Hardtop Warning Indication

*1

LED Headlight Warning Light

*

Smart City Brake Support (SCBS) Warning Indication/Warn‐

7-40

*1

ing Light

(Amber)

Seat Belt Warning Light

7-40

*

Door-Ajar Warning Light

*Some models.

4-28

When Driving

Instrument Cluster and Display

Signal

Warning Lights

Page

*

7-40

Door-Ajar Warning Indication

*

7-40

Trunk lid-Ajar Warning Indication

7-40

Low Fuel Warning Indication/Warning Light

*1

Check Fuel Cap Warning Light

*

7-40

Low Washer Fluid Level Warning Indication/Warning Light

*

1

2

The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or

when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an

Authorized Mazda Dealer.

The light turns on continuously when the parking brake is applied.

Indication/Indicator Lights

▼

These lights turn on or flash to notify the user of the system operation status or a system

malfunction.

Signal

Indicator Lights

Page

2-49

*

*1

Passenger Air Bag Deactivation Indicator Light (TypeA)

*1

Passenger Air Bag Deactivation Indicator Light (TypeB)

*

3-11

3-48

KEY Indicator/Indicator Light

(White/Green)

*1

Security Indicator Light

*

3-43

4-31

Retractable Hardtop Operation Indicator Light

*

*1

Wrench Indication/Indicator Light

Low Engine Coolant Temperature Indicator Light

4-31

4-37

(Blue)

*

Shift Position Indication

*Some models.

4-29

When Driving

Instrument Cluster and Display

Signal

Indicator Lights

Lights-On Indicator Light

Page

4-45

Headlight High-Low

Beam

4-48

Headlight High-Beam Indicator Light

Flashing the Headlights

4-48

Turn and Lane-Change

Signals

4-50

Turn Signal/Hazard Warning Indicator Lights

Hazard Warning Flasher

4-57

Traction Control System

(TCS)

4-66

Dynamic Stability Con‐

trol (DSC)

*1

TCS/DSC Indicator Light

4-67

(Turns on)

7-36

*1

4-68

4-73

DSC OFF Indicator Light

*

Select Mode Indication

*

4-79

High Beam Control System (HBC) Indicator Light

(Green)

*

*1

4-91

4-84

Blind Spot Monitoring (BSM) OFF Indicator Light

*

Lane Departure Warning System (LDWS) OFF Indicator

*1

Light

Smart City Brake Sup‐

port (SCBS)

*

Smart City Brake Support (SCBS) Indication

4-103

Smart City Brake Sup‐

port (SCBS)

*

Smart City Brake Support (SCBS) Indicator Light

4-103

(Red)

Smart City Brake Sup‐

port (SCBS)

*

*1

Smart City Brake Support (SCBS) OFF Indicator Light

4-104

*Some models.

4-30

When Driving

Instrument Cluster and Display

Signal

Indicator Lights

Page

*

4-112

Cruise Main Indication

(White)

4-112

Cruise Set Indication/Indicator Light

(Green)

*

1 The light turns on when the ignition is switched on for an operation check, and turns off

a few seconds later or when the engine is started. If the light does not turn on or remains

turned on, have the vehicle inspected at an Authorized Mazda Dealer.

Wrench Indication/Indicator Light^*

Low Engine Coolant Temperature

Indicator Light (Blue)

▼

Type A instrument cluster

The light illuminates continuously when

the engine coolant temperature is low and

turns off after the engine is warm.

If the low engine coolant temperature

indicator light remains illuminated after

the engine has been sufficiently warmed

up, the temperature sensor could have a

malfunction. Consult an Authorized

Mazda Dealer.

Perform maintenance in accordance with

the message.

Type B instrument cluster

When the ignition is switched ON, the

wrench indicator light is illuminated and

then turns off after a few seconds.

The wrench indicator light turns on when

the preset maintenance period arrives.

Verify the content and perform

maintenance.

Refer to Maintenance Monitor on page

6-15.

*Some models.

4-31

When Driving -> Instrument Cluster and Display for Your Mazda Mx-5 SUV Fourth Generation (2016-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals