When Driving
Instrument Cluster and Display
NOTE
Changing the Temperature Unit of the
Outside Temperature Display
After refueling, it may require some time
for the indicator to stabilize. In addition,
the indicator may deviate while driving
on a slope or curve since the fuel moves
in the tank.
The display indicating a quarter or less
remaining fuel has more segments to
show the remaining fuel level in greater
detail.
The outside temperature unit can be
switched between Celsius and Fahrenheit
using the following procedure.
Settings can be changed by operating the
center display screen.
Refer to Personalization Features on page
9-9.
NOTE
The direction of the arrow ( ) indicates
that the fuel-filler lid is on the left side
of the vehicle.
When the temperature unit indicated in the
outside temperature display is changed,
the temperature unit indicated in the
engine coolant gauge display changes in
conjunction with it.
Outside Temperature Display
▼
When the ignition is switched ON, the
outside temperature is displayed.
Distance-to-empty
▼
This displays the approximate distance
you can travel on the remaining fuel based
on the fuel economy.
The distance-to-empty will be calculated
and displayed every second.
NOTE
Under the following conditions, the
outside temperature display may differ
from the actual outside temperature
depending on the surroundings and
vehicle conditions:
NOTE
Significantly cold or hot temperatures.
Even though the distance-to-empty
Sudden changes in outside
display may indicate a sufficient amount
of remaining driving distance before
refueling is required, refuel as soon as
possible if the fuel level is very low or
the low fuel warning light illuminates.
temperature.
The vehicle is parked.
The vehicle is driven at low speeds.
The display will not change unless you
add more than approximately 9 L (2.3
US gal, 1.9 Imp gal) of fuel.
4-23
English 
